ID: Q154025
The information in this article applies to:
This article describes how to create multiple indexes within one document. You may want to create multiple indexes, for example, when you need to have an index at the end of each section or chapter as well as at the end of your document.
To create multiple indexes, use one of the following methods depending on your situation:
Method 1:
Use this method to index words you need to include in and index for separate sections in a multiple section document:
1. Create a bookmark for each section of the document for which you want
to create an index. (NOTE: Omit this step for an index for the entire
document.) To create the bookmark:
a. Select the entire section and then click Bookmark on the Edit menu.
b. In the Bookmark Name text box, type a name for the bookmark, for
example "section1" (without quotation marks), and then click Add.
c. Repeat steps a and b for each section of the document.
a. Select the text for which you want to create the index entry.
b. On the Insert menu, click Index and Tables, and then click the Index
tab.
c. Click Mark Entry. The text you selected in step a appears
in the Main Entry text box in the Mark Index Entry dialog box. If
you want to create a sublevel index entry, type the word or phrase
in the Subentry text box. To include a third sublevel, type the
subentry text in the Subentry box, followed by a colon, followed by
the word or phrase you want to use for the third-level entry. Choose
any other options you want.
d. Click Mark All.
Word examines each paragraph of your document, matching it to the
text that you specified in the Main Entry and Subentry boxes, and
inserts an XE field immediately following the first occurrence of
that word in each paragraph.
e. Click in the document and select the next word or phrase that you
want to index.
NOTE: This dialog box is "modeless" which means that while the
dialog box is on the screen, you can click in the text area and
continue editing.
f. Return focus to the Mark Index Entry dialog box by clicking the
dialog box, and then click Mark All.
g. Repeat steps e and f for each word you want to index.
a. Position the insertion point where you want the first index, and
then click Field on the Insert menu.
b. In the Categories list box, select Index and Tables. In the Field
Names list box, choose Index.
c. Click Options.
d. In the Switches list box, select the \b switch and then click
Add to Field. The \b switch specifies an area of the document
for which you created a bookmark. (See step 1.)
e. In the Field Codes text box, position the insertion point after the
\b and type the name of the bookmark you created in step 1. For
example, if you created a bookmark for the first section called
"Section1" (without quotation marks) the Field Codes text box should
resemble the following:
Index \b section1
f. Repeat steps a through e for each of the remaining sections of the
document.
To add an index at the end of the document, position the insertion point
where you want to build the index, click Index and Tables on the Insert
menu, click the Index tab, and then click OK.
Use this method if you do not have a multiple section document but want to have multiple indexes based on a certain category:
1. Mark the index entries. To do this, follow these steps:
a. Select the text for which you want to create the index entry.
b. On the Insert menu, click Index and Tables, and then click the Index
tab.
c. Click Mark Entry. The text you selected in step a appears
in the Main Entry text box in the Mark Index Entry dialog box. If
you want to create a sublevel index entry, type the word or phrase
in the Subentry text box. To include a third sublevel, type the
subentry text in the Subentry box, followed by a colon, followed by
the word or phrase you want to use for the third-level entry. Choose
any other options you want.
d. Click Mark All.
Word examines each paragraph of your document, matching it to the
text that you specified in the Main Entry and Subentry boxes, and
inserts an XE field immediately following the first occurrence of
that word in each paragraph.
e. Click in the document and select the next word or phrase that you
want to index.
NOTE: This dialog box is "modeless" which means that while the
dialog box is on the screen, you can click in the text area and
continue editing.
f. Return focus to the Mark Index Entry dialog box by clicking the
dialog box, and then click Mark All.
g. Repeat steps e and f for each word you want to index.
which index you want the entry to appear The \f switch defines an entry
type. For example, the entry for the field { XE "Selecting Text" \f "a"}
is included only in an index inserted by the field { INDEX \f "a" }.
The default entry type is "i."
a. View field codes by pressing ALT+F9.
b. Each index entry field that you want to include in a specific
index will need to be marked with an identifying letter. For example,
all index entries that you want to appear in Index "a" will be marked
as:
{ XE "Selecting Text" \f "a"}
All index entries that you want to appear in Index "b" will be marked
as:
{ XE "Selecting Text" \f "b"}
a. Position the insertion point where you want the first index, and
then click Field on the Insert menu.
b. In the Categories list box, select Index and Tables. In the Field
Names list box, choose Index.
c. Click Options.
d. In the Switches list box, select the \f switch and then click
Add to Field. The \f switch defines the entry type
e. In the Field Codes text box, position the insertion point after the
\f and type the letter that represents the category you created in
step 1. For example:
( Index \f "a"}
f. Repeat steps a through e for each index you wish to create in each
category.
ARTICLE-ID: Q125937
TITLE : How to Create a Table of Contents or an Index with Field
Codes
Keywords : kbualink97 kbdta word8 kbfield macword98 winword ntword macword word95
Version : MACINTOSH:6.0,6.0.1; WINDOWS:6.0,6.0a,6.0c,7.0,7.0a
Platform : MACINTOSH WINDOWS
Issue type : kbinfoLast Reviewed: April 26, 1999