ID: Q187309
The information in this article applies to:
Damaged document files can cause any program to exhibit unusual behavior. Such behavior occurs because the program attempts to make decisions about what to do based on incorrect information in the file.
The best way to protect yourself against document corruption is to keep backup copies of your documents. In the event that you don't have a backup copy of your document, this article provides troubleshooting procedures you can use to identify and recover corrupted Microsoft Word for Windows documents.
NOTE: Because there are several versions of Windows, the following steps may be different on your computer. If they are, please consult your product documentation to complete these steps.
Damaged documents often exhibit behavior that is not part of the program's design (for example, infinite repagination, incorrect document layout and formatting, unreadable characters on the screen, error messages during processing, system hangs or crashes when you load or view the file, or any other unusual behavior that cannot be attributed to the normal operation of the program). This behavior can be caused by factors other than document corruption. To rule out other factors, use the following troubleshooting steps:
Method 1: Convert the File to Another Format, Then Convert It Back to Word:
This is the easiest and most complete document recovery method; always try it first. Save the file in RTF file format; this format preserves the formatting in your Microsoft Word for Windows document. After you save the file in RTF format, re-open the document in Word for Windows, and convert it from RTF. If this method succeeds, the file corruption is removed during conversion. If the corruption persists after you save the file in RTF file format, try saving the file in the following file formats:
Other word processing formats
Text Only
Method 2: Copy Everything Except the Last Paragraph Mark to a New Document:
Word for Windows associates a wide variety of formatting with the last paragraph mark, especially section and style formatting. If you copy everything except the last paragraph mark to a new document, the corruption may be left behind in the original document. In the new document, reapply the section or style formatting.
NOTE: You can select everything except the last paragraph mark by pressing CTRL+END, and then CTRL+SHIFT+HOME.
Method 3: Copy the Undamaged Portions of the Document to a New Document:
Sometimes you can determine the location of file corruption in your document. In such cases, copy everything except the damaged portion to a new file, and then use the following steps to reconstruct your document:
1. After you copy the undamaged portions of your document to a new file,
save a copy of the damaged document in Text Only format.
the file that contains the undamaged portion of your document.
document.
There are several techniques you can use to try to open a document that will not open. Which method you use depends on the nature and severity of the damage to your document and the nature of the behavior exhibited. Although many of these methods succeed regularly, not every damaged document can be recovered.
Method 1: Open the Damaged Word Document in Draft Mode:
Sometimes you can open a document successfully in draft mode when it will not open in other views. Once you open the file, you may be able to recover or repair the file.
To switch to draft mode in Word, use either of the following procedures:
-or-
Sub Main
ScreenUpdating 0
FileOpen .Name = "<path>\Filename.doc" ' include the path and
' substitute your file
' name
ToolsOptionsView .DraftFont = 1
ScreenUpdating
End Sub
NOTE: In this macro, substitute the name of your damaged document
for the "Filename.doc" argument text.
Using this macro may enable you to open documents that you cannot
otherwise open due to damage that affects printer setup, page layout, or
screen updates in Word. For example, if a general protection (GP) fault
occurs in Word before the document is opened, you may be able to avoid
the GP fault by opening the document using the above macro.
WARNING: ANY USE BY YOU OF THE CODE PROVIDED IN THIS ARTICLE IS AT YOUR
OWN RISK. Microsoft provides this macro code "as is" without warranty of
any kind, either express or implied, including but not limited to the
implied warranties of merchantability and/or fitness for a particular
purpose.
The final paragraph mark in a Word document contains information about the document. If the document is damaged, you may be able to retrieve the text of the document if you can omit this final paragraph mark.
To access a document but leave its final paragraph mark behind, use the following steps:
1. Create a new blank document.
2. On the Insert menu, click File.
3. In the Insert File dialog box, locate and select the damaged document,
and click OK.
Method 3: Open the File by Linking to It:
This method works for Word 2.x and 7.x (not 6.x) For more information see the note at the bottom of this method.
If the "Insert the Document as a File in a New Document" (Method 2) doesn't work, try this method. This method allows you to access the document without bringing over the final paragraph mark. In addition, when you create a link, part of the header information is not read.
This method allows you to open the file if this part of the header or if the final paragraph mark is in the damaged area of the document.
Use the following steps to link to a "good: file (a file that has not been corrupted) and then change the link to point to the damaged file:
1. Create a new document. In the new document, type "This is a Test."
Save the document.
3. Click New on the File menu. In the new document, click Paste Special on
the Edit menu.
Press OK.
The Links dialog box is displayed.
Source (in Word 2.x, click Change Link).
The Open dialog box appears and asks which document you want to change
the link to.
8. Click OK in the Links dialog box (in Word 2.x, enter the path and
file name).
The data/text from the damaged Document will appear (provided there
was any recoverable data/text).
Word 2.x).
NOTE: If you are using Word 6.x, try the following steps:
1. Create a new document. In the new document, type "This is a test".
Save the document.
2. Select the text and click Copy on the Edit menu.
3. Press the right arrow on the keyboard to deselect the text.
This will put your insertion point on the next line.
4. On the Edit menu, click Paste Special.
5. Select either Unformatted or Formatted text, and click Paste Link.
Click OK.
6. To display the field codes, press Alt+F9.
The field code will resemble the following:
{LINK Word.Document.6 "C:\\MYDOCS\\TEST.DOC" "DDE_LINK3" \a \r \*
MERGEFORMAT}
7. Modify the path to the document in the field code to be the path to
the corrupted document.
8. Delete the "DDE_LINK#" from the field code (include the quotation
marks).
9. Position insertion point inside the LINK field.
10. Press F9 to update the field.
11. Press ALT+F9 to view the results of the field.
12. To unlink the field and to convert the field to text, press
CTRL+SHIFT+F9.
When you cannot open a damaged document in Word for Windows (usually because of corruption in the file header), you can strip out the file header and open the file as Text Only. When you strip the header information, all formatting is lost. This method strips out the file header information.
1. Start Microsoft WordPad or Write. (In Windows 95 click Run on the Start
menu, type "WordPad" [without the quotation marks], and click OK; in
Windows 3.x, from Microsoft Windows Program Manager, click Run on the
File menu, type "write" [without the quotation marks], and click OK).
A dialog box prompts you to specify how you want to convert the file.
Click the No Conversion button.
see binary (foreign) characters at the beginning and end of the
document. Delete these characters.
NOTE: In Windows 95, the file may be opened intact without further
conversion or cleanup necessary. If this is the case, save the file
with a new name and open the file in Word 6.x or later.
with a .doc file name extension. Before you click the OK button, note
the directory where the file is being saved so you can easily find it
when you restart Word for Windows.
6. Restart Word for Windows and open the file you saved from WordPad or
Write (the file will have the name you gave it in step 4). (On the
File menu, click Open. In the File Name box, type the path and file
name of the newly created file, and click OK.)
the OK button to open the text file in Word for Windows.
NOTE: In Word for Windows version 2.x, select Word Document (*.doc) in
the Save File As Type box. In Word for Windows version 1.x, choose the
Options button and select Normal in the File Format box.
click OK.
NOTE on Tables: Microsoft WordPad 1.0 can read and write Word 6/7 file format, automatically converting the file and retaining such formatting as WordPad itself supports. A Word 6 or 7 document that cannot be opened will often open in WordPad. Tables will e converted to tab-delimited text but will retain the basic tabular structure of the table; this is often the only way to recover a corrupted table.
Method 5: Strip Out the File Header Information:
NOTE: This method works with MS-DOS versions 3.0 to 6.2 only.
Use this method only if all other methods fail. When you cannot open a damaged document in Word for Windows (usually because of corruption in the file header), you can strip out the file header and open the file as Text Only. When you strip the header information, all formatting is lost.
1. At an MS-DOS prompt, type the following, then press ENTER
copy con+FILE NAME.DOC NEWNAME.DOC
where "FILE NAME" is the name of the Damaged file, and "NEWNAME" is
the name of the new file. (This causes the word "CON" to appear and
the insertion point to blink on a blank line.)
3. Press F6, and then press ENTER.
4. Start Word for Windows and open the new file.
5. Delete the odd characters at the beginning and end of the file. The
text of the file is usually intact in the middle of the file.
NOTE: If the file was saved in Word for Windows with the Allow Fast
Saves check box selected, the text may appear in noncontiguous blocks.
The Fast Save feature keeps track of the changes that you make by
appending the changes to the end of your document and remembering where
these changes go. At regular intervals, Fast Save updates the document
with these changes (this method is faster and takes less memory than
saving the entire document). If your document becomes damaged before
Fast Save has a chance to build a complete, updated copy of your
document, you may need to re-order the text (move the appended text to
its appropriate place in the document) and then reformat it.
For information about how to turn off the Fast Save feature, please see
the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q71999
TITLE : Disabling the Fast Save Feature in Word for Windows
"Microsoft MS-DOS User's Guide and Reference," version 5.0, page 391 "Microsoft Word for Windows User's Guide," version 2.0, page 676
Additional query words: garbage locked hung stop stopped crashed corrupt frozen nothing damaged damage troubleshoot tshoot corrupted
Keywords : kbdta wordnt winword ntword word6 winword2 word7 word95
Version : WINDOWS:1.0,1.1,1.1a,2.0,2.0a,2.0a-CD,2.0b,2.0c,6.0,6.0a,6.0c,7.0,7.0a; winnt:6.0
Platform : WINDOWS winnt
Issue type : kbhowtoLast Reviewed: May 14, 1999