ID: Q149329
The information in this article applies to:
Graphics drawn on a picture box with the graphics methods do not appear when the form containing that picture box is printed using the PrintForm method. Bitmaps and/or icons print correctly. The AutoRedraw property has no affect on this problem.
To work around this problem, please see the following article in the Microsoft Knowledge Base (and use the procedures detailed in that article):
ARTICLE-ID: Q141933
TITLE : How to Capture & Print the Screen, a Form, or any Window in
VB
Alternatively, the problem may also be avoided by setting AutoRedraw to
true before any drawing occurs on the picturebox to be printed. Before
printing, set the Image property of the Picture box to the Picture
property. This can be accomplished with a line of code similar to:
Picture1.Picture = Picture1.Image
After these steps the graphics drawn on the picture box will print
correctly.
Microsoft has confirmed this to be an issue in the Microsoft products listed at the beginning of this article. Microsoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
1. Start Visual Basic 4.0. Form1 is created by default.
2. Add a single PictureBox control and a two command buttons to the form.
3. Add this code to Form1:
Private Sub Command1_Click()
Picture1.Line (10, 10)-(500, 500)
Picture1.Line (10, 500)-(500, 10)
End Sub
Private Sub Command2_Click()
Form1.PrintForm
End Sub
4. Press F5 or select Start from the Run menu to run the application. Click
Command1 to add the graphics to the picture box, then click Command2 to
print the form. After printing is complete, notice that the picture box
on the printed page is empty.
Version : 4.00
Platform : WINDOWS
Issue type : kbbug
Last Reviewed: August 24, 1998