DMA CD-ROM Drive Icon Does Not Appear in Windows Explorer

ID: Q235859


The information in this article applies to:


SYMPTOMS

When you try to view a CD-ROM drive in Windows Explorer that requires Direct Memory Access (DMA), the drive may not be present, but the drive may be present in Device Manager. If the DMA settings are disabled in the CD-ROM properties, the drive may be present after you restart your computer, although a CD-ROM drive that supports DMA may not retain the DMA setting after you restart your computer.


CAUSE

This problem can occur because during enumeration of your hardware devices, a device conflict can occur, and this may cause Configuration Manager to rebalance the resources of your computer. During this arbitration process, the Integrated Drive Electronics (IDE) controller input/output (I/O) range is changed from the boot configuration to a different configuration, but the primary and secondary controller resources are not changed properly.


RESOLUTION

To resolve this problem, perform a forced configuration of the hard disk controller:

  1. Click Start, point to Settings, click Control Panel, and then double-click System.


  2. Click the Device Manager tab, and then double-click the Hard Disk Controllers branch to expand it.


  3. Double-click the listed IDE controller.


  4. Click the Resources tab, and then click to clear the Use Automatic Settings check box.


  5. Change the I/O range from the current setting to a different I/O range, and then click OK. For example, if the setting is currently 1410-141f, change it to 1060-106f.


  6. Close all open Windows, and then restart your computer.



STATUS

Microsoft has confirmed this to be a problem in Windows 98.

Additional query words:


Keywords          : kbhw kbui win98 
Version           : WINDOWS:
Platform          : WINDOWS 
Issue type        : kbprb 

Last Reviewed: June 26, 1999