Error Message: Not Enough Memory to Load RamDrive

ID: Q188886

The information in this article applies to:

SYMPTOMS

When you start your computer using the Windows 98 Startup disk, you may receive the following error message:

Not Enough Memory to Load RamDrive

Also, drive C may contain the files that are normally loaded on the RAM drive.


CAUSE

This behavior can occur if your hard disk is partitioned with drive overlay software such as Ontrack Disk Manager or EZBIOS EZ-Drive. When you start your computer using the Windows 98 Startup disk, the drive overlay software is not loaded from your hard disk.


RESOLUTION

To resolve this issue, follow these steps:

  1. Restart your computer without the Windows 98 Startup disk in the floppy disk drive.


  2. Follow the instructions on the screen to start your computer from the floppy disk. The actual method varies depending on the drive overlay software manufacturer, but most involve pressing either SPACEBAR or the CTRL key.


  3. Insert the Windows 98 Startup disk into the drive when you are prompted.



MORE INFORMATION

The third-party products discussed in this article are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Additional query words: 98 ez-bios ez bios how to boot from emergency startup
disk with drive overlay 


Keywords          : kb3rdparty kbenv kberrmsg win98 
Version           : WINDOWS:
Platform          : WINDOWS 
Issue type        : kbprb

Last Reviewed: February 11, 1999