Microsoft Windows 98 Second Edition README for NetworksID: Q234877
|
This article contains a copy of the information in the Microsoft Windows 98 Second Edition README for Networks (Network.txt) file included with Windows 98 Second Edition.
-----------------------------------------------------------
Microsoft Windows 98 Second Edition
README for Networks
April 1999
-----------------------------------------------------------
(c) Copyright Microsoft Corporation, 1999
This document provides complementary or late-breaking
information to supplement the Microsoft Windows 98
Second Edition documentation.
------------------------
HOW TO USE THIS DOCUMENT
------------------------
To view Network.txt on-screen in Notepad, maximize
the Notepad window.
To print Network.txt, open it in Notepad or another
word processor, and then on the File menu, click Print.
--------
CONTENTS
--------
CLIENT FOR NETWARE
PLUG AND PLAY NETWORK CARDS AND 16-BIT
REAL-MODE DRIVERS
INTEL ETHEREXPRESS 16 NICs AND PCI COMPUTERS
CHANGING A NETWORK ADAPTER TO 16-BIT ODI
OR NDIS DRIVERS
ODI DEVICE DRIVERS AND MS TCP/IP
PROBLEMS PRINTING TO POSTSCRIPT PRINTERS OVER A
NETWARE NETWORK
ISSUES AND INSTALLATION OF MS-DLC WITH WINDOWS 98
SECOND EDITION
USER PROFILES OVER THE NETWORK
REAL-MODE PROTOCOLS: WARNING ICONS ON YOUR
NETWORK ADAPTER
USING AN IBM THINKPAD WITH A DOCK II
USING COMSPEC VARIABLES POINTING TO NETWORK
COMMAND.COM FILES
SAMBA AND WINDOWS 98 SECOND EDITION
MIRAMAR SYSTEMS PC MACLAN APPLETALK CONNECTIVITY
NETWORKS NOT SUPPORTED IN WINDOWS 98 SECOND EDITION
----------------------------------------------------
CLIENT FOR NETWARE
==================
Windows 98 and NetWare 3.12 and 4.01 Servers
--------------------------------------------
Running Windows 98 Second Edition with Microsoft Client
for NetWare can cause problems with NetWare 3.12 and
4.01 servers, if packet burst is turned on. This
is a known problem that Novell has fixed. You
can find the patch, Pburst.exe, posted on its
forums. Contact Novell for assistance.
Opening Files on NetWare 3.11 Servers
-------------------------------------
Programs that open a large number of files
consecutively in rapid succession might have
occasional problems opening files on NetWare 3.11
servers. This can also happen when opening a file
in a folder for which you do not have file scan
rights, such as an MS Mail shared post office.
You might see some of the following error messages:
- "File not found" error on a file you know exists
- "Sharing violation" or "Lock violation" error
- "Unable to open file" error
- "File in use" error
There are two solutions to these problems:
- Obtain a patch file from Novell for the
NetWare 3.11 server. Contact Novell for assistance.
- Disable Support for long file names in Client for NetWare.
This means that you cannot use long file names
in Windows 98 Second Edition when on a NetWare server.
To disable support for long file names:
1. Click Start, click Run, and then type Regedit.
2. Go to
HKEY_Local_Machine\System\CurrentControlSet\Services\VxD\NWRedir
3. Create a new binary value named supportLFN
with a value of 0.
Lowercase Extended-Character Passwords on
NetWare 4.1 Servers
------------------------------------------
In a NetWare 4.1 environment, Client for NetWare
does not support passwords that use certain
lowercase extended characters. Users need to
change their passwords to all uppercase characters.
Client for NetWare and Programs That Use
External Files
-----------------------------------------
If you are using Microsoft Client for NetWare,
and you run a program that needs access to an
auxiliary file, your program might have problems
if the auxiliary file is located on a drive other
than the drive the program is on. This is because
only the current drive is searched for auxiliary
files; the search path is not searched. If you
experience this problem, make sure the program and
any auxiliary files are on the same drive.
Novell NetWare Login Scripts
----------------------------
The Login Script Processor for the Microsoft
Client for NetWare should process all the
commands in your login scripts. However, you
cannot load memory-resident programs (TSRs)
from these scripts.
Installing Novell Client32 Overwrites
Microsoft Services for NetWare Directory
Services Files
-----------------------------------------
When you install Novell Client32, the Novell
setup program replaces the Microsoft file
Netdef.inf, renames it Netdef.bnw, and then
deletes the NDS setup file Nwnds.dll. The result
is that after uninstalling Novell Client32,
Microsoft Services for NetWare Directory
Services does not install.
To work around this problem:
1. Find the file Netdef.bnw and then rename it
Netdef.inf.
2. Copy the Nwnds.dll file to the Windows\System
directory on your hard disk by completing
the following procedure:
1. Insert your Windows 98 Second Edition installation
CD into the CD-ROM drive.
2. Open an MS-DOS window.
3. Change to the Windows 98 directory on your CD-ROM,
and then type the following at the command
prompt:
extract /a /l c:\windows\system precopy1.cab nwnds.dll
Upgrading Over an Earlier Beta Version of Windows
-------------------------------------------------
If you upgrade this release of Windows over
an earlier beta release and you have Service for
NetWare Directory Services installed, a message
notifies you about version conflicts for the
following files:
- Nwnp32.dll (v. 4.0.969)
- Nwlsproc.exe (v. 4.0.968)
- Netware.tmp (v. 4.0.968)
When you see the message, click No. After Windows is
installed, you need to reinstall Service for NetWare
Directory Services. To do this:
1. In Control Panel, double-click Network.
2. Click Add, click Service, click Microsoft,
click Microsoft Services For NetWare Directory
Services, then click Add.
3. Follow the instructions on your screen.
Client for NetWare Networks and Service for NDS
- Installing Together
-----------------------------------------------
If your local area network is using NetWare
version 4.1 or later, there is no need to install
Client for NetWare Networks separately. When you
install Service for NDS, it also installs the Client
for NetWare Networks. In some instances, the network
will not be available after a restart of the system,
and an "Unable to find Network Device, Abort, Retry,
Fail?" message appears. To bypass the error message,
restart the system.
Microsoft Windows CE Services
-----------------------------
Services for Windows CE 1.1 and 2.0 are incompatible
with Microsoft Service for NetWare Directory Services.
When you synchronize your machine with the network,
you will lose NDS authentication. This problem does
not occur with Client for Netware.
PLUG AND PLAY NETWORK CARDS AND 16-BIT
REAL-MODE DRIVERS
======================================
When you run the 16-bit real-mode driver for
your Plug and Play network interface card (NIC),
your Plug and Play card might appear not to
work properly.
This is because on most computers, the Plug and
Play card is inactive until Windows 98 enables it.
The 16-bit NIC drivers load before Windows 98 can
turn on Plug and Play cards. Some 16-bit NIC drivers
do not recognize Plug and Play cards (most NE2000
Plug and Play clones fall into this category). In
this case, follow these steps to use your Plug and
Play card with a 16-bit NIC driver:
1. Run the Softset utility that comes with your
Plug and Play card, and then set the card to
non-Plug and Play mode.
2. Remove the network card from the list of
devices in Device Manager: In Control Panel,
double-click System, click Device Manager,
select the network card, and then click Remove.
3. Reinstall the network card using the Add New
Hardware icon in Control Panel.
If you install a 32-bit protected-mode NIC driver in
the future, you can rerun Softset to turn on Plug and
Play mode for your card.
INTEL ETHEREXPRESS 16 NICs AND PCI COMPUTERS
============================================
If you are using an Intel EtherExpress 16-network
interface card (NIC) in a PCI computer that has a
Diamond Speed Star PCI video card, your system might
stop responding or not initialize properly. These
problems, according to Intel customer support, are
not related to Windows 98 Second Edition and happen
on a variety of operating systems.
If you have one of the following video cards,
contact your vendor to obtain a new video BIOS update:
* Diamond Speed Star PCI video card with BIOS
version 1.01
* Diamond Viper PCI VGA Video Adapter
* Diamond Stealth video card, BIOS v1.03
Other PCI video cards might also cause problems with
this Intel NIC. In general, if you experience problems
with your EtherExpress 16 in a PCI computer other than
those described above, replace the card. If your system
still stops responding or does not initialize properly,
report the problem to Microsoft.
CHANGING A NETWORK ADAPTER TO 16-BIT ODI
OR NDIS DRIVERS
========================================
If you want to add a 16-bit network client
in Windows 98 Second Edition or use an NDIS2 or ODI
driver, you must first verify that the network support
provided in Windows 98 Second Edition supports the
16-bit driver. To do so:
In Control Panel, double-click Network and
then select Properties for each Network Adapter
to be changed to the 16-bit MAC. In the property
page for the network adapter, note which selections
are available (not dimmed). If all three items are
available, you can easily add either NDIS2 or
16-bit ODI.
If NDIS2 is dimmed, the following Net Clients
are unavailable:
* Real-mode Win95 Networking
* NDIS-based Banyan Vines 16-bit Client
If ODI is dimmed, the following are unavailable:
* Novell NetWare (Workstation Shell 3.X (NetX))
* Novell NetWare (Workstation Shell 4.0 and
above (VLM))
To obtain support that is not available in the
Windows 98 supplied drivers, contact the vendor of
your network adapter for the most recent drivers for
your adapter.
After the new drivers are installed, all three
selections should be available. If they are not,
contact the network adapter vendor for assistance.
If problems occur when installing the 16-bit network
client after the necessary selection (ndis2 or odi)
is available, contact the manufacturer of the 16-bit
network client.
Novell Drivers
--------------
Microsoft no longer supports Novell's IPX.COM stack.
We recommend that you upgrade to Novell's ODI drivers
or Microsoft's clients.
ODI DEVICE DRIVERS AND MS TCP/IP
================================
You might not be able to access other machines
via TCP/IP with 16-bit ODI drivers. This is the
case if your system pings both the loopback
address (127.0.0.1) and its own address
but not any other addresses on the network and/or
name resolution fails for hosts not in the
local hosts file.
To solve this problem, verify in your Net.cfg file
that the statement "FRAME ETHERNET_II" is the last
listed frame type under the section header "Link
Driver". Microsoft TCP/IP requires the Ethernet_II
frame type. See Q129726, "TCP/IP Requires Ethernet_II
Frame Type for ODI Driver," in the Microsoft
Knowledge Base for more information.
Novell Netware Client32
-----------------------
- Client32 UNC Syntax:
UNC syntax for Novell Netware Client32 is as follows:
\\NDS Tree Name\NDS Object Name
For example, to open a volume whose NDS container
name is "server_vol1" in the context organizational unit
"test" organization "ms" in the tree "Microsoft", the
UNC syntax is "\\Microsoft\.server_vol1.test.ms" or
"\\Microsoft\.cn=server_vol1.ou=test.o=ms". Subdirectory
information can be appended to NDS volumes. For example:
\\Microsoft\.server_vol1.test.ms\public
which takes the user to the public directory on
the server_vol1 volume.
- Upgrading over Client32:
Upgrade to Client32 2.2 or later before
installing Windows 98 Second Edition.
- Novell IP Gateway service does not close after
browsing with Internet Explorer 4.0:
The Novell IP Gateway Service Task does not close
after browsing with the Internet Explorer 4.0 integrated
shell. When Internet Explorer 4.0 is running as the
shell, closing the browser window does not terminate
Internet Explorer 4.0, and the Winsock is not closed.
Functionality of the IP Gateway is not affected.
Additional browser windows and other Winsock applications
can use the Novell Winsock.
- UNC Paths are displayed as "\\...":
Upgrade to IntranetWare Client 2.2 or greater. This issue
is resolved with this client release.
Novell NetWare VLM
------------------
VLM Client Kit 1.21 is not compatible with Windows 98
Second Edition.
Do not install over this client or install this client
in Windows 98 Second Edition. This is the version that
shipped with NetWare 4.11 and IntranetWare. Only client
versions shipped with NetWare 4.10 and earlier work with
Windows 98 Second Edition.
Specifically, the Netware.drv that ships with this
client pack is incompatible with Windows 98 Second Edition.
The file specifics are: Netware.drv, 7/20/96, 170,832
bytes, ver:3.10.96.201
- System instability with real mode clients and
insufficient conventional memory:
Increasing conventional memory often resolves system
instability issues when using real-mode network clients
and device drivers. As a rule of thumb, the system should
have enough memory to run the MS-DOS version of ScanDisk.
Sample Config.sys file:
DOS=HIGH,UMB
DEVICE=c:\windows\HIMEM.SYS
DEVICE=c:\windows\EMM386.EXE NOEMS
If your installation requires EMS memory,
replace NOEMS with RAM or AUTO.
DEVICEHIGH=c:\windows\IFSHLP.SYS
DEVICEHIGH=c:\windows\DBLBUFF.SYS
DEVICEHIGH=c:\windows\SETVER.EXE
Depending on your installation, other files
may be loaded high. Please see Q151718, "Managing
Memory in MS-DOS Mode" in the Microsoft Knowledge
Base for additional information on real-mode
memory management.
- Uninstalling Windows 98 Second Edition with a
real-mode Netware client:
If you want to uninstall Windows 98 Second Edition
when a real-mode Netware client (VLM or Netx) is
installed, run Uninstall from either Safe Mode Command
Prompt Only or from a Windows 98 Second Edition Startup
Disk (made using the Startup Disk tab of the Add/Remove
Programs feature in Control Panel). If the real-mode
Netware client is loaded in memory, the system does not
have sufficient conventional memory to successfully
uninstall Windows 98 Second Edition.
- IntranetWare 4.11 server is missing DLL files needed
for Nwadmn3x.exe:
Nwadmn3.x requires DLL files installed by VLM CLient Kit
1.21, which does not work with Windows 98 Second Edition.
There are two possible solutions:
- Run Install.nlm on the server to "Install Legacy NWADMIN
Utility." This will install Nwadmin.exe on the server,
which will work as documented. Installing the legacy
nwadmin utility is documented by Novell. Contact Novell
for technical support of this procedure.
- Use Nwunpack to expand the DLL file to a location in your
MS-DOS path, such as a NetWare search drive or the
\Windows\System directory. Do not overwrite the existing
DLL files. This procedure is not supported by Microsoft.
LANDESK 2.0
-----------
LANDESK version 2.0 uses a TSR named Usertsr.exe
that might cause Windows 98 to stop responding when
you use the Microsoft IPX/SPX-compatible protocol
(Nwlink.vxd) or file and printer sharing for
Microsoft Networks (Vserver.vxd).
LANDESK version 2.01 fixes this problem, and the
patch is available on Intel's BBS or from Intel
product support. For the BBS and product support
telephone numbers, consult the documentation that
came with your copy of LANDESK.
Banyan VINES
------------
A number of Vines issues can be corrected by
downloading the latest version of the Banyan Vines
32-bit client from http://www.banyan.com.
If, during Startup, a message indicates that
the VINES version is not the latest, you need
to edit the Vines.ini file in the Windows folder
so it contains the following lines:
[NEWREV]
dontcopy=1
vines.version=5.5x (x) USA; where x=your version
windows.version=3.95
If the message, "Vines NDIS Interface error: 1021.
See NDISBAN.DOC for an error description," is
displayed during Startup, run the VINES utility
PCCONFIG to change Banyan drivers to NDIS drivers.
Also, make sure the section name matches the driver
name in the Protocol.ini file.
If you are installing Banyan Vines 16-bit client
and Setup is interrupted, you may see the message
"Cannot connect to z:\wnewrev.exe, you must
reinstall windows." If you see this message, reboot
your computer, press F8 during startup, select
Safe Mode, command prompt only. Edit your
System.ini file, change the entry Shell=Z:\wnewrev.exe
to Shell=explorer.exe and then restart the computer.
The Banyan Dos/3.1 network stack in the Autoexec.bat
takes up too much conventional memory and does not
leave enough memory for the Uninstall program to run.
If the Banyan Dos/3.1 client is used and you have
upgraded to Windows 98 Second Edition and want to
uninstall Windows 98 Second Edition, you must boot the
computer to Safe Mode DOS Only, and type Uninstall at
the MS-DOS prompt. Bypassing the Banyan Vines network
stack leaves the Uninstall program enough memory to
function normally.
Cannot Upgrade Banyan Vines Client By Using NEWREV
--------------------------------------------------
If you are using the Banyan Vines client for Windows 95,
you may not be able to upgrade your existing client by
using NEWREV. This limitation applies only if you have
a version that is older than the version on the Banyan
server to which you are connecting. This may be the case
if your administrator has upgraded the server to the
latest edition, and it is newer than your existing
client. Contact your LAN administrator or Banyan Vines
to get the latest upgrade.
Vines16
-------
The Vines16 install program behaves the same in
Windows 98 Second Edition as it does in Windows 95.
When the install program runs, users must first install
the client, and then after Windows restarts, cancel the
installation program. This completes the Vines16
installation.
During the cancel portion of the Vines16 install
program, the Vines file WNEWREV.EXE occasionally
causes a GPF. The machine hangs sometimes with video
corruption. When this happens, the Shell has been
reset to shell=z:\wnewrev.exe. After Windows 98
restarts, it will continuously restart. To fix this,
edit C:\Windows\System.ini and set the
shell=z:\wnewrev.exe to shell=explorer.exe.
If the Vines interface does not function, for example,
if you cannot map a network driver from within Windows
or view previously mapped Vines drives, the path may be
lost or corrupt. You must have Z:\ set to the end of the
path. This can be accomplished in either the Autoexec.bat
or the Vines Login script. You can also have the Vines
Administrator place the path in the Vines login script
for you.
On rare occasions, during the Vines16 client install
program, the following error occurs:
"ver.dll file in use, click okay" which results in an
endless loop with the Vines16 client install program.
The workaround is:
1. Shut down your machine.
2. Restart your machine in Safe Mode, Command
Prompt Only.
3. Edit C:\Windows\System.ini so shell=explorer.exe
4. Edit C:\Windows\Vines.ini to include dontcopy=1 in
the [newrev] section
5. Restart your system.
If the Vines16 client install program runs spontaneously
or runs every time the system is restarted, edit
C:\Windows\Vines.ini to include dontcopy=1 in the
[newrev] section.
Always click NO when the Vines16 install program
prompts you to overwrite ver.dll. Overwriting ver.dll
causes a fault with the powrprf.dll and major loss
of Windows functionality, like printing and Control
Panel functions. The workaround is to re-extract
ver.dll from your Windows 98 Second Edition source
media to C:\Windows and C:\Windows\System.
Creating New Files and Folders on a Vines Network That
Is Using the Banyan DOS/Windows 3.1 Client
------------------------------------------------------
If you create a new file or folder in any folder on
a Vines network share, you cannot delete the original
folder.
Installing Banyan Vines 16-bit Client with MSBatch.inf
Is Not Supported
-------------------------------------------------------
Windows 98 Second Edition does not support the following
lines in MSBatch.inf setup files:
Clients=vines552
Protocols=ndisban, ndistok
If you wish to install support for Banyan Vines
networking, it must be done after Windows 98 Second Edition
setup is complete.
Upgrading from Windows 95 to Windows 98 Second Edition
over a Banyan Vines Network By Using the Banyan Vines
32-Bit Client
-----------------------------------------------------
When you upgrade from Windows 95 to Windows 98 Second
Edition over a Banyan Vines network using the Banyan Vines
32-bit client, the network cannot be accessed after the
second restart during the upgrade. The solution to this
problem is to select the Banyan Vines Common Logon option
before beginning the upgrade.
Removing the Banyan Vines Client for Windows 95 Causes
the Error "Failed to Load Resource DLL (VNSNDIR.DLL)."
------------------------------------------------------
When you remove the Banyan Vines 32-bit client
from the Network Properties dialog box in Control
Panel, the Banyan Vines Protocol for Windows 95 is
not automatically removed before the system reboots.
Even though the Banyan Vines Protocol appears in the
Network dialog box before you restart the computer,
it will not appear in the Network dialog box after
you restart the system, and an error will occur
whenever the Network dialog box is opened. The
solution to this problem is to remove the Banyan
Vines Protocol for Windows 95 when you remove the
Banyan Vines Client for Windows 95.
Installing Microsoft Virtual Private Networking
with Banyan Vines 32-Bit Client
-----------------------------------------------
If the Banyan Vines 32-bit client is installed
after Microsoft Virtual Private Networking, then
the Banyan Ethernet protocol for Windows 95 does
not know what to bind to, so it displays <nothing>
in Network properties. If you do not change this
before installing the Banyan Vines 32-bit client
and restarting the computer, then both the Banyan
Vines client and Banyan Ethernet protocol will be
removed from Network dialog box. To keep this from
happening, view the properties of the Vines Protocol,
view the Network Adapter tab, and then change the
adapter to which the Vines Protocol is bound. Then,
change the bindings on your network adapter so that
the Banyan Vines Protocol is bound to it. If VPN
is installed, the Vines Ethernet Protocol will be
bound to the VPN adapter by default.
Capturing Printer Ports with 16-bit Banyan Vines
After Upgrade
-------------------------------------------------
Users may have problems capturing printer ports
after upgrading from Windows 3.1, Windows for
Workgroups 3.11, or Windows 95 with the 16-bit
Banyan Vines client. To restore the ability to
capture printer ports, remove and then reinstall
the 16-bit Banyan Vines client.
Banyan Vines 16-bit Installations
---------------------------------
During the Windows network drivers installation
of Banyan Vines 16-bit client, Setup attempts
to overwrite Ver.dll, prompting users with the
following message: "The current ver.dll file is
newer then the one that would be installed. Do
you want to replace the current file?" If you
click Yes, Ver.dll is overwritten by an older
version of the Ver.dll from the Vines server. The
result is numerous shell problems, Powrprof.dll
errors, Version.dll errors, and Mprexe errors.
The workaround is to keep the newer version by
selecting No when prompted.
The problem will arise:
-Clean install of Windows 98 Second Edition then
install Vines 16-bit client server
-Upgrading existing 16 bit Banyan clients to
current version
Artisoft LANtastic
------------------
Windows 98 Second Edition does not support 16-bit
versions of Artisoft LANtastic. Uninstall your 16-bit
version of LANtastic and upgrade to the 32-bit clients
before you upgrade to Windows 98 Second Edition.
Upgrading and any subsequent reinstalls might
disable the LANtastic 7.0 Internet Gateway Client.
If this happens, restore client functionality by
running LANtastic's Setup utility and removing your
current LANtastic install. After it is uninstalled,
run the Setup utility again to reinstall LANtastic.
LANtastic saves your user and resource settings for
use during the reinstall. DO NOT use the Add/Remove
Programs feature to uninstall the application. This
completely removes LANtastic and causes you to lose
your user and resource settings.
Problem Upgrading Over LANtastic Redirector
-------------------------------------------
To avoid an error that may prevent your upgrade
from finishing, connect to the LANtastic server
by making a permanent mapped drive connection to
the shared folder that contains the Win98 source
files. Do not connect to the server with the UNC
("\\ServerName") syntax.
Installing LANTastic 7.0 for the First Time Causes
Missing Msrrdir.vxd Error Message
--------------------------------------------------
Installing LANtastic 7.0 for the first time on
a system with Windows 98 causes an error message
to appear. The message states that Setup cannot
find the file Msrrdir.vxd, and suggests that you
look for it on the Windows 98 Second Edition CD.
Msrrdir.vxd is a LANtastic file that cannot be
found on the Windows 98 Second Edition CD. To continue
with Setup, click " skip file," or type the path for
your Windows\System folder, typically C:\Windows\System.
The file is located there, and the LANtastic Setup will
continue.
LANtastic and ModemShare Error
------------------------------
The upgrade of Windows 98 Second Edition might stop
during the first boot of Windows 98 Second Edition after
the files are copied. You will see a LANtastic blue
screen error message:
The modem is not responding; network setup
failure.
Press any key to continue.
To resolve this error, press any key, and the Windows
98 Second Edition Setup will continue. Modem sharing
will function properly when Setup is complete.
For more information, and for the latest patches
for LANtastic 7.0, contact Artisoft at
http://www.artisoft.com/.
LANtastic Shared Drives and Printers
------------------------------------
Windows 98 Second Edition has problems interpreting the
shared resource information from LANtastic servers.
This is seen as a difficulty in addressing shared
drives and printers. For example, a Windows 98
LANtastic client will view a mapped drive in My
Computer, Windows Explorer, or the LANtastic
Custom control panel as a bare drive letter
without the server and resource share names.
Windows 98 LANtastic clients have problems using
shared printers that were initially set up through
the Assign Printers dialog box in the LANtastic
Custom control panel. You can work around
client-side printing problems by opening the
Windows 98 Printer Properties dialog box, and
then clicking the Details tab. Under Print to
the following port, specify the UNC path to the
printer. For example:
\\LTSERVER\HPLASER
LANtastic and Power Management
------------------------------
Power management features, such as the Standby
shut down option, or the Sleep button on your
computer might not work when LANtastic networking
(client or server) is installed.
PROBLEMS PRINTING TO POSTSCRIPT PRINTERS OVER
A NETWARE NETWORK
=============================================
If you have a problem when printing to a
PostScript printer over a network (error
messages on the printer; no output is printed),
it might be due to incorrectly configured banner
pages. To solve this problem, you can:
- Disable banner pages by clearing the Banner
check box on the Capture Settings printer
properties page. To do this, open the Printers
folder, right-click the icon for the printer you
are using, and then click Properties.
-or-
- Ask your network administrator to correctly
configure banner pages on the Netware server for
a PostScript printer.
No NetWare Logon Prompt After Local Upgrade
Over Novell Netx
--------------------------------------------
When running Windows 98 Second Edition Setup from
a local CD on a system with Novell Netx installed,
it's possible that the preferred server setting
contained in your Net.cfg file will not be transferred
to Microsoft Client for NW networks.
Problems include:
- No server is specified in the Windows-based Client for
NW Nets logon dialog.
- No Windows-based Client for NW Nets login dialog.
To fix, transfer the name of the server specified in the file
NET.CFG "preferred server=" line to the Network control panel/
Client for NW networks/General tab.
ISSUES AND INSTALLATION OF MS-DLC WITH WINDOWS 98
SECOND EDITION
=================================================
Windows 98 Second Edition contains MS-DLC and support for
installing over an existing MS-DLC or IBM-DLC installation.
Setup detects DLC and makes the appropriate changes to your
configuration files for these protocols. Refer to the Windows
98 Resource Kit for a complete description of DLC support.
USER PROFILES OVER THE NETWORK
==============================
If you are using user profiles over a
Windows NT or Novell NetWare network, and you
include Start Menu/Programs, Network Neighborhood,
and/or desktop icons in your profile, the
server must support long file names to
ensure that these parts of the user profile
work over the network.
REAL-MODE PROTOCOLS: WARNING ICONS ON YOUR
NETWORK ADAPTER
==========================================
If you install a network that does not use
protected-mode protocols, such as Novell
Netware 3.x, you might see a yellow warning
icon next to your network adapter in Device
Manager. You can ignore this warning; your
network is fully functional. To remove the
warning icon, use Extract.exe to extract the
file Ndis.vxd from your Windows 98 Second
Edition CD-ROM. Then, copy Ndis.vxd into your
Windows\System folder. When you reboot your
system, the yellow warning icon no longer appears.
USING AN IBM THINKPAD WITH A DOCK II
====================================
If you enable 32-bit PC (PCMCIA) card support,
and your network cards do not appear to work
properly when inserted into the Dock II PC card
slots, or if you have an ISA network card in the
Dock II that has a "Code 10" error in its properties
in Device Manager, call the IBM Help Center. They
can provide you with a file to correct this problem.
USING COMSPEC VARIABLES POINTING TO NETWORK
COMMAND.COM FILES
===========================================
If you are on a network and are mapping your
comspec environment variable to a network file
server, you might see "Incorrect MS-DOS version"
error messages. To correct this issue, map the
comspec to a network location that contains
Windows 98 files or map the comspec to a local
copy of the files. The MS-DOS version reported
by Windows 98 is 7.1.
SAMBA AND WINDOWS 98 SECOND EDITION
====================================
For security reasons, Windows 98 Second Edition
no longer allows you to send plain text passwords.
It sends only encrypted passwords. However, Samba
servers require plain text passwords, so you cannot
connect to Samba servers unless you change a
registry entry to enable plain text passwords.
To enable plain-text passwords, add the Registry
entry EnablePlainTextPassword (reg Dword) 1 in
the following Registry location:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\Vnetsup
MIRAMAR SYSTEMS PC MACLAN APPLETALK CONNECTIVITY
================================================
In Windows 98 Second Edition, any change to the Network
dialog box in Control Panel automatically removes PC MACLAN.
To correct this problem, contact Miramar Systems, Inc.,
or complete the following procedure. To prevent this
problem from occurring, complete steps 5 through 7 only.
>>>To restore Appletalk connectivity:
1. Click Start, click Shut Down, click Restart in MS-DOS
mode, and then click OK.
2. At the MS-DOS command prompt, type scanreg/restore
and then press ENTER.
3. In the Microsoft Registry Checker list, select the file
whose date most immediately precedes the date of the change
you made in the Network dialog box, and then press ENTER.
WARNING: Any changes you made to your system after that
file date are removed.
4. Press ENTER to restart your computer.
5. Using the Setup utility that came with the software, remove
Miramar Systems PC MACLAN.
6. When prompted, press ENTER to restart your computer.
7. Using the Setup utility, reinstall PC MACLAN.
NETWORKS NOT SUPPORTED IN WINDOWS 98 SECOND EDITION
====================================
The following network systems are not supported in
Windows 98 Second Edition. These networks may work after
you upgrade to Windows 98 Second Edition, but Microsoft
does not guarantee that they will work correctly.
- Vines16: All versions earlier than 7.1
- Netware: Using Client for Microsoft Networks connecting
to server versions earlier than 3.11.
- Client32: It is recommended that you use Client32
versions later than 2.2.
- Client 32 for DOS/Win31: All versions.
- VLM/NetX: Monolithic drivers (ipx.com)
- Lantastic16: All versions
- Lantastic32: All versions earlier than 7.0
- Pathworks16: Not supported
- Pathworks32: It is recommended that you use
Lantastic 7.0 or later.
- Backup Agents, Jetadmin Services: Versions shipped
with Windows 95.
- TCP: 16-bit stacks
NOTE: Non-WinSock2 TCP/IP stacks are only supported on upgrades.
These products do not function if installed on Windows 98
Second Edition.
Additional query words:
Keywords :
Version : WINDOWS:
Platform : WINDOWS
Issue type : Last Reviewed: June 14, 1999