ID: Q153939
The information in this article applies to:
A computer running Windows For Workgroups (WFWG) with TCPIP32 DHCP client installed and that is also running the Shiva Remote client that is supplied with Microsoft Exchange, is unable to access TCP/IP resources after being restarted. Carrying out an ipconfig command from an MS-DOS command prompt shows an IP address of 0.0.0.0. The client previously had a valid DHCP lease before restarting.
The client does not retain the previous lease after being restarted. Instead, it issues a new discover <request packet?> each time it is restarted. The DHCP server was temporarily unavailable when the WFWG client restarted and was unable to lease a new address.
There are 2 files that may have been replaced as a hotfix, Vdhcp.386 and Vnbt.386. The file dates would be from 1996. These files are necessary for the Shiva remote client to accept a TCP/IP address from a PPP server. However, these files are the cause of the client not retaining a valid lease after restart.
Microsoft has confirmed this to be a problem in Windows for Workgroups TCPIP32 version 3.11b. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
Keywords : kbnetwork prodtcp32
Platform : WINDOWS
Issue type : kbbugLast Reviewed: June 12, 1998