DOCUMENT:Q125056 11-FEB-2002 [fortran] TITLE :INFO: Precision and Accuracy in Floating-Point Calculations PRODUCT :Microsoft Fortran Compiler PROD/VER::1.0,1.0a,1.5,1.51,2.0,4.0,5.0,6.0 OPER/SYS: KEYWORDS:kbcode kbFortranPS kbLangC kbLangFortran kbVC kbVC100 kbVC150 kbVC151 kbVC200 kbVC400 k ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft FORTRAN PowerStation for MS-DOS, versions 1.0, 1.0a - Microsoft Fortran Powerstation 32 for Windows NT, version 1.0 - Microsoft Visual C++, versions 1.0, 1.5, 1.51, 2.0, 4.0 - Microsoft Visual C++, 32-bit Enterprise Edition, versions 5.0, 6.0 - Microsoft Visual C++, 32-bit Professional Edition, versions 5.0, 6.0 - Microsoft Visual C++, 32-bit Learning Edition, version 6.0 ------------------------------------------------------------------------------- SUMMARY ======= There are many situations in which precision, rounding, and accuracy in floating-point calculations can work to generate results that are surprising to the programmer. There are four general rules that should be followed: 1. In a calculation involving both single and double precision, the result will not usually be any more accurate than single precision. If double precision is required, be certain all terms in the calculation, including constants, are specified in double precision. 2. Never assume that a simple numeric value is accurately represented in the computer. Most floating-point values can't be precisely represented as a finite binary value. For example .1 is .0001100110011... in binary (it repeats forever), so it can't be represented with complete accuracy on a computer using binary arithmetic, which includes all PCs. 3. Never assume that the result is accurate to the last decimal place. There are always small differences between the "true" answer and what can be calculated with the finite precision of any floating point processing unit. 4. Never compare two floating-point values to see if they are equal or not- equal. This is a corollary to rule 3. There are almost always going to be small differences between numbers that "should" be equal. Instead, always check to see if the numbers are nearly equal. In other words, check to see if the difference between them is very small or insignificant. MORE INFORMATION ================ In general, the rules described above apply to all languages, including C, C++, and assembler. The samples below demonstrate some of the rules using FORTRAN PowerStation. All of the samples were compiled using FORTRAN PowerStation 32 without any options, except for the last one, which is written in C. Please refer to the FORTRAN manual(s) supplied with Microsoft FORTRAN for a description of numeric constants, and article Q36068 for a description of the internal representation of floating-point values. SAMPLE 1 -------- The first sample demonstrates two things: - That FORTRAN constants are single precision by default (C constants are double precision by default). - Calculations that contain any single precision terms are not much more accurate than calculations in which all terms are single precision. After being initialized with 1.1 (a single precision constant), y is as inaccurate as a single precision variable. x = 1.100000000000000 y = 1.100000023841858 The result of multiplying a single precision value by an accurate double precision value is nearly as bad as multiplying two single precision values. Both calculations have thousands of times as much error as multiplying two double precision values. true = 1.320000000000000 (multiplying 2 double precision values) y = 1.320000052452087 (multiplying a double and a single) z = 1.320000081062318 (multiplying 2 single precision values) Sample Code ----------- C Compile options: none real*8 x,y,z x = 1.1D0 y = 1.1 print *, 'x =',x, 'y =', y y = 1.2 * x z = 1.2 * 1.1 print *, x, y, z end SAMPLE 2 -------- Sample 2 uses the quadratic equation. It demonstrates that even double precision calculations are not perfect, and that the result of a calculation should be tested before it is depended on if small errors can have drastic results. The input to the square root function in sample 2 is only very slightly negative, but it is still invalid. If the double precision calculations did not have slight errors, the result would be: Root = -1.1500000000 Instead, it generates the following error: run-time error M6201: MATH - sqrt: DOMAIN error Sample Code ----------- C Compile options: none real*8 a,b,c,x,y a=1.0D0 b=2.3D0 c=1.322D0 x = b**2 y = 4*a*c print *,x,y,x-y print "(' Root =',F16.10)",(-b+dsqrt(x-y))/(2*a) end SAMPLE 3 -------- Sample 3 demonstrates that due to optimizations that occur even if optimization is not turned on, values may temporarily retain a higher precision than expected, and that it is very unwise to test two floating- point values for equality. In this example, two values are both equal and not equal. At the first IF, the value of Z is still on the coprocessor's stack and has the same precision as Y. Therefore X does not equal Y and the first message is printed out. At the time of the second IF, Z had to be loaded from memory and therefore had the same precision and value as X, and the second message also is printed. Sample Code ----------- C Compile options: none real*8 y y=27.1024D0 x=27.1024 z=y if (x.ne.z) then print *,'X does not equal Z' end if if (x.eq.z) then print *,'X equals Z' end if end SAMPLE 4 -------- The first part of sample code 4 calculates the smallest possible difference between two numbers close to 1.0. It does this by adding a single bit to the binary representation of 1.0. x = 1.00000000000000000 (one bit more than 1.0) y = 1.00000000000000000 (exactly 1.0) x-y = .00000000000000022 (smallest possible difference) Some versions of FORTRAN round the numbers when displaying them so that the inherent numerical imprecision is not so obvious. This is why x and y look the same when displayed. The second part of sample code 4 calculates the smallest possible difference between 2 numbers close to 10.0. Again, it does this by adding a single bit to the binary representation of 10.0. Notice that the difference between numbers near 10 is larger than the difference near 1. This demonstrates the general principle that the larger the absolute value of a number, the less precisely it can be stored in a given number of bits. x = 10.00000000000000000 (one bit more than 10.0) y = 10.00000000000000000 (exactly 10.0) x-y = .00000000000000178 The binary representation of these numbers is also displayed to show that they do differ by only one bit. x = 4024000000000001 Hex y = 4024000000000000 Hex The last part of sample code 4 shows that simple nonrepeating decimal values often can be represented in binary only by a repeating fraction. In this case x=1.05, which requires a repeating factor CCCCCCCC....(Hex) in the mantissa. In FORTRAN, the last digit "C" is rounded up to "D" in order to maintain the highest possible accuracy: x = 3FF0CCCCCCCCCCCD (Hex representation of 1.05D0) Even after rounding, the result is not perfectly accurate. There is some error after the least significant digit, which we can see by removing the first digit. x-1 = .05000000000000004 Sample Code ----------- C Compile options: none IMPLICIT real*8 (A-Z) integer*4 i(2) real*8 x,y equivalence (i(1),x) x=1. y=x i(1)=i(1)+1 print "(1x,'x =',F20.17,' y=',f20.17)", x,y print "(1x,'x-y=',F20.17)", x-y print * x=10. y=x i(1)=i(1)+1 print "(1x,'x =',F20.17,' y=',f20.17)", x,y print "(1x,'x-y=',F20.17)", x-y print * print "(1x,'x =',Z16,' Hex y=',Z16,' Hex')", x,y print * x=1.05D0 print "(1x,'x =',F20.17)", x print "(1x,'x =',Z16,' Hex')", x x=x-1 print "(1x,'x-1=',F20.17)", x print * end SAMPLE 5 -------- In C, floating constants are doubles by default. Use an "f" to indicate a float value, as in "89.95f". /* Compile options needed: none */ #include void main() { float floatvar; double doublevar; /* Print double constant. */ printf("89.95 = %f\n", 89.95); // 89.95 = 89.950000 /* Printf float constant */ printf("89.95 = %f\n", 89.95F); // 89.95 = 89.949997 /*** Use double constant. ***/ floatvar = 89.95; doublevar = 89.95; printf("89.95 = %f\n", floatvar); // 89.95 = 89.949997 printf("89.95 = %lf\n", doublevar); // 89.95 = 89.950000 /*** Use float constant. ***/ floatvar = 89.95f; doublevar = 89.95f; printf("89.95 = %f\n", floatvar); // 89.95 = 89.949997 printf("89.95 = %lf\n", doublevar); // 89.95 = 89.949997 } Additional query words: ====================================================================== Keywords : kbcode kbFortranPS kbLangC kbLangFortran kbVC kbVC100 kbVC150 kbVC151 kbVC200 kbVC400 kbVC500 kbVC600 Technology : kbVCsearch kbVC400 kbAudDeveloper kbFortranSearch kbvc150 kbvc100 kbZNotKeyword2 kbZNotKeyword3 kbVC500 kbVC600 kbVC151 kbVC200 kbFORTRANPower32100NT kbFORTRANPower100DOS kbFORTRANPower100aDOS kbVC32bitSearch kbVC500Search Version : :1.0,1.0a,1.5,1.51,2.0,4.0,5.0,6.0 Issue type : kbinfo ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.