| 
Recommended Practices for WINS
ID: Q185786
 
 | 
The information in this article applies to:
- 
Microsoft Windows NT Server version  4.0
SUMMARY
This article discusses the recommended practices for implementing the
Windows Internet Name Service (WINS). Following these practices should
decrease the occurrence of WINS problems.
MORE INFORMATION
-  It is highly recommended that a WINS server point to itself as primary
   and secondary WINS in the TCP/IP configuration.
 
 For additional information, please see the following article in the
   Microsoft Knowledge Base:
 
 ARTICLE-ID: Q150737
 TITLE     : Setting Primary and Secondary WINS Server Options
- It is highly recommended to use the correct ratio of WINS servers to
   WINS clients. A general rule is to have one WINS server for each
   10,000 users plus one additional WINS server for redundancy. The
   redundant server does not have to be located at the same site.
 
 For additional information on WINS Ratios, please see the following
   White Paper available on the Microsoft anonymous ftp server:
 
 File Name: Winswp.doc
      Location : ftp://ftp.microsoft.com/bussys/winnt/winnt-docs/papers/
      Title    : "Windows Internet Naming Service (WINS)" (Page 44)
- It is highly recommended to use a hub and spoke replication model.
 
 For additional information, please see the following article in the
   Microsoft Knowledge Base:
 
 ARTICLE-ID: Q168076
 TITLE     : WINS Fails to Converge
 
 -and-
 
 Page 24 of the WINS White Paper mentioned above.
- It is highly recommended to periodically run Jetpack (for example, once
   a month or once a quarter).
 
 For additional information, please see the following articles in the
   Microsoft Knowledge Base:
 
 ARTICLE-ID: Q167812
 TITLE     : WINS and DHCP Dynamic Database Compaction in Windows NT
                  4.0
 
 ARTICLE-ID: Q145881
 TITLE     : How to use Jetpack.exe To Compact a WINS or DHCP
                  Database
- Multihomed WINS servers require additional configuration in order for
   replication to occur. For information on how to configure multihomed
   WINS servers please see the following article in Microsoft Knowledge
   Base:
 
 ARTICLE-ID: Q139380
 TITLE     : Multihomed WINS Server Replication Partner Failures
- It is highly recommended to not use static entries for WINS clients.
 
 For additional information, please see the following article in the
   Microsoft Knowledge Base:
 
 ARTICLE-ID: Q177140
 TITLE     : How to Remove Static WINS Entries from All WINS Servers
Keywords          : 
Version           : WinNT:4.0
Platform          : winnt 
Issue type        : kbinfo 
Last Reviewed: February 8, 1999