ID: Q124671
The information in this article applies to:
Page 4-21 in the Update manual shows bytes 18-32 as reserved bytes for the field subrecord. However, if the whole field subrecord is to take 32 bytes, the reserved section should end at byte 31 instead of 32.
Bytes 18-32 are stated as reserved bytes in the field subrecord. However, the table header record starts at byte 0 so an ending byte of 32 would make the table header record 33 bytes long instead of 32 bytes long. The document should be changed to say Bytes 17-31 are reserved bytes in the field subrecord. Each field subrecord starts at Byte 32 X N, where N is the number of the field entry, as shown on the table on page 4-20.
Additional reference words: FoxDos 2.60a docerr KBCategory: kbref kbdocerr KBSubcategory: FxotherGeneral
Last Reviewed: January 11, 1995