How to Change the Default Windows Printer from FoxPro

The information in this article applies to:

• Microsoft Visual FoxPro for Windows, versions 3.0, 5.0
• Microsoft FoxPro for Windows, versions 2.5x 2.6, 2.6a

SUMMARY

With the set of procedures included in this article, you can change the default Windows printer from within FoxPro for Windows.

NOTE: These procedures also work in Window NT. The method described below does not work with FoxPro 2.6a in Windows 95.

MORE INFORMATION

Following is a summary of the three main procedures: LISTPRINT, GETPRINT, and PUTPRINT.

LISTPRINT

LISTPRINT displays on the screen all the printers in the WIN.INI file, the number of printers, and the default printer.

GETPRINT

The GETPRINT procedure is called by LISTPRINT and gets a list of available printers, the number of printers, and the default printer in the WIN.INI file. The parameters are as follows:

• Printer list (array)
• Number of printers in WIN.INI file (numeric)
• Default printer in the WIN.INI file (character)

PUTPRINT

The PUTPRINT procedure sets the default printer in the WIN.INI file. This procedure takes three or four parameters, as follows

• Printer list (array--Use parameter 1 from GETPRINT.)
• Number of printers (numeric--Use parameter 2 from GETPRINT.)
• The new default print string (Put directly into the WIN.INI file.)

• Number of the printer in the printer array (numeric)
• Port number (If a printer has more than one port [FILE:, LPT1:] the number will represent the number in the list order [FILE: = 1, LPT1: = 2]. If a third parameter is passed that is numeric, but no fourth parameter is passed, it will default to the first or only port.)

Example 1

   Printers = ""
   Number = 0
   Defa_print = ""
   DO GETPRINT WITH Printers, Number, Defa_print
   *Printers   - is an array with all the printers installed.
   *Number     - is the number of printers in the WIN.INI file.
   *Defa_print - is the default printer in the WIN.INI file.

   DO PUTPRINT WITH Printers, Number, x
   *Printers   - is the return array from the GETPRINT.
   *Number     - is the return number of printers from GETPRINT.
   *x          - is the number of the row (in the Printers array) that
   *             you want to be the new default printer.
   *y          - is only needed if the printer has more than one output
   *             port.  If it does, you use this parameter to set the port
   *             (LPT1 = 1, LPT2 = 2 and LPT3 = 3)

Example 2

   Printers = ""
   Number = 0
   Defa_print = ""
   DO GETPRINT WITH Printers, Number, Defa_print
   *Printers   - is an array with all the printers installed.
   *Number     - is the number of printers in the WIN.INI file.
   *Defa_print - is the default printer in the WIN.INI file.

   DO PUTPRINT WITH Printers, Number, NEW_DEFA
   *Printers   - is the return array from the GETPRINT.
   *Number     - is the return number of printers from GETPRINT.
   *NEW_DEFA   - is the new default string that will be put directly into
   *             the WIN.INI file (e.g., "HP LaserJet III,HPPCL5MS,LPT1;")
   *             This should only be done if you know exactly what should
   *             be in the Default printer string.

To verify that the correct driver has been set as the default, issue the following commands:

   RELEASE device
   DO LISTPRINT

NOTE: Removing the SET TALK lines from this code will cause a "Cannot access characters beyond string" error.

   *!*****************************************************************
   *!
   *!     Procedure: GETPRINT
   *!
   *!*****************************************************************
   PROCEDURE getprint
   * Query WIN.INI to get data on the installed and default printers.

   PARAMETER DEVICE, NUMBER, dfltprnt
   * Usage:
   *    DIMENSION device[1]
   *    numprinters = 0
   *    defaultprnt = ""
   *    DO GETPRINT WITH device, numprinters, defaultprnt
   *
   * The "device" array will be populated with the names and
   * parameters for all installed print devices.
   *
   * The "device" array has this structure:
   * Col 1: Printer name
   * Col 2: Parameter for [device] section
   * Col 3: Parameter for [PrinterPort] section (includes time-out
   * parameters)
   *
   * The contents of "device" might look something like this after
   * GETPRINT is called:
   *   Col 1                      Col 2           Col 3
   *   -------------------------  --------------  ----------------
   *   Apple LaserWriter II NTX   pscript,LPT2:   pscript,LPT2:,15,90
   *   Generic / Text Only=TTY    fred.prn        fred.prn,15,45
   *   HP LaserJets(Level 5)      HPPCL5MS,LPT1:  HPPCL5MS,LPT1:,15,45
   *
   * "numprinters" in this case would be 3
   * "defaultprnt" might be this:
   *    HP LaserJets(Level 5),HPPCL5MS,LPT1:

   #DEFINE buflen 2048
   PRIVATE m.in_talk, m.dcount, m.retbuf, m.bytes, m.thisdevice

   IF PARAMETERS() < 3
      WAIT WINDOW "This procedure requires 3 parameters"
      RETURN
   ENDIF

   IF FILE(SYS(2004)+"FOXTOOLS.FLL")
      SET LIBRARY TO (SYS(2004)+"foxtools.fll") ADDITIVE
   ELSE
      WAIT WINDOW "GETPRINT requires the FoxTools library."
      RETURN
   ENDIF

   IF SET("TALK") = "ON"
      SET TALK OFF
      m.in_talk = "ON"
   ELSE
      m.in_talk = "OFF"
   ENDIF

   * Fill in the first column of the array with installed device
   * names.
   m.retbuf = REPLICATE(CHR(0),buflen)
   m.bytes = getprostrg("devices",0,CHR(0),@m.retbuf,buflen)
   * The second argument of 0 to GetProfileString() returns the contents
   * of the entire section, with each entry separated by a null terminator
   * (CHR(0)).
   m.dcount = 0
   m.retbuf = LEFT(m.retbuf,m.bytes)
   DO WHILE CHR(0) $ m.retbuf
      m.thisdevice = LEFT(m.retbuf,AT(CHR(0),m.retbuf)-1)
      IF LEFT(m.thisdevice,1) <> CHR(0)
         m.dcount = m.dcount + 1
         DIMENSION device[m.dcount,3]
         device[m.dcount,1] = m.thisdevice
      ENDIF
      m.retbuf = SUBSTR(m.retbuf,AT(CHR(0),m.retbuf)+1)
   ENDDO

   * Fill in the second and third columns of the device array with the
   * parameters of each installed device from the [devices] section
   * (column 2) and the [PrinterPorts] section (column 3).
   FOR m.j = 1 TO m.dcount
      retbuf = REPLICATE(CHR(0),256)
      m.bytes = ;
         getprostrg("devices",device[m.j,1],CHR(0),@m.retbuf,256)
      m.retbuf = LEFT(m.retbuf,m.bytes)
      device[m.j,2] = m.retbuf

      retbuf = REPLICATE(CHR(0),256)
      m.bytes = ;
         getprostrg("PrinterPorts",device[m.j,1],CHR(0),@m.retbuf,256)
      m.retbuf = LEFT(m.retbuf,m.bytes)
      device[m.j,3] = m.retbuf
   ENDFOR

   * Store the number of installed devices.
   m.number = m.dcount

   * Now get the default printer.
   retbuf = REPLICATE(CHR(0),256)
   m.bytes = getprostrg("windows","device",CHR(0),@m.retbuf,256)
   m.retbuf = LEFT(m.retbuf,m.bytes)
   m.dfltprnt = m.retbuf

   SET TALK &in_talk

   *!*****************************************************************
   *!
   *!     Procedure: LISTPRINT
   *!
   *!*****************************************************************
   PROCEDURE listprint
   PARAMETER DEVICE
   #DEFINE buflen 2048
   PRIVATE m.in_talk,m.i
   IF FILE(SYS(2004)+"FOXTOOLS.FLL")
      SET LIBRARY TO (SYS(2004)+"foxtools.fll") ADDITIVE
   ELSE
      WAIT WINDOW "LISTPRINT requires the FoxTools library."
      RETURN
   ENDIF
   IF SET("TALK") = "ON"
      SET TALK OFF
      m.in_talk = "ON"
   ELSE
      m.in_talk = "OFF"
   ENDIF

   DIMENSION DEVICE(1)
   NUMBER = 0
   dflt = ""

   DO getprint WITH DEVICE, NUMBER, dflt
   CLEAR
   ? ALLTRIM(STR(m.number,3))+" installed printer devices in win.ini:"
   FOR m.i = 1 TO NUMBER
      ? "  "+device[m.i,1]+"="+device[m.i,3]
   ENDFOR
   ?
   ? "Default printer is "+dflt
   SET TALK &in_talk

   *!*****************************************************************
   *!
   *!     Procedure: PUTPRINT
   *!
   *!*****************************************************************
   PROCEDURE putprint
   PARAMETER DEVICE, NUMBER, dflt, portnum
   * Take the printer device information in the device array and
   * update WIN.INI with it.
   *
   * "Number" is the total number of printers listed in "device."
   * "dflt" is the string to write to the [windows] device= statement
   * to set the default printer, or if dflt is a number, the array row
   * to construct this statement from. Thus, to make the default
   * printer the third one listed in "device," either pass a 3 as dflt
   * or pass the actual string (something like HP LaserJets(Level
   * 5),HPPCL5MS,LPT1:). If the string is passed, it must exactly
   * match an entry in the [devices] section of the WIN.INI file.
   *
   * GETPRINT can be used to construct the device array.
   *
   IF FILE(SYS(2004)+"FOXTOOLS.FLL")
      SET LIBRARY TO (SYS(2004)+"foxtools.fll") ADDITIVE
   ELSE
      WAIT WINDOW "PUTPRINT requires the FoxTools library."
      RETURN
   ENDIF

   IF TYPE("dflt") = "N"
      IF PARAMETERS() < 4
         portnum = 1
      ENDIF
      m.strg = device[m.dflt,1]+","+getport(device[m.dflt,2],portnum)
   ELSE
      m.strg = m.dflt
   ENDIF

   * Set the default printer
   =putprostrg("windows","device",m.strg)

   * Delete all existing device and PrinterPort entries.
   =putprostrg("devices",0,CHR(0))
   =putprostrg("PrinterPorts",0,CHR(0))

   FOR m.i = 1 TO NUMBER
      =putprostrg("devices",device[m.i,1],device[m.i,2])
      =putprostrg("PrinterPorts",device[m.i,1],device[m.i,3])
   ENDFOR

   *!*****************************************************************
   *!
   *!     Function: PUTPROSTRG
   *!
   *!*****************************************************************
   FUNCTION putprostrg
   PARAMETER SECTION, entry, string
   fn = regfn("WRITEPROFILESTRING","CCC","I")
   RETURN callfn(fn,SECTION,entry,string)
   * NOTE: When the code in this section is implemented in a program
   * running on Windows 95 or Windows NT, the user will get the error
   * "Entry point writeprofilestring not found." In this case, add the
   * optional fourth argument to the call to function call RegFN()
   * in the function named putprostrg as per the following example:
   *
   * fn=regfn("WRITEPROFILESTRING","CCC","I","krnl386.exe")
   *
   * The string "krnl386.exe" specifies that the writeprofilestring API
   * is located in that library.
   *!*****************************************************************
   *!
   *!     Function: GETPROSTRG
   *!
   *!*****************************************************************
   FUNCTION getprostrg
   PARAMETER SECTION, entry, dflt, buffer, blen
   fn = regfn("GETPROFILESTRING","CCC@CI","I")
   RETURN callfn(fn,SECTION,entry,dflt,@buffer,blen)
   * NOTE: When the code in this section is implemented in a program
   * running on Windows 95 or Windows NT, the user will get the error
   * "Entry point getprofilestring not found." In this case, add the
   * optional fourth argument to the call to function call RegFN()
   * in the function named Getprostrg as per the following example:
   *
   * fn=RegFN("GETPROFILESTRING","CCC@CI","I","krnl386.exe")
   *
   * The string "krnl386.exe" specifies that the getprofilestring API
   * is located in that library.

   *!*****************************************************************
   *!
   *!     Function: GETPORT
   *!
   *!*****************************************************************
   FUNCTION getport
   PARAMETER m.pstrg, m.pnum
   * Get the first "port" from a printer string.

   * First get the printer driver name (e.g., pscript) and the comma.
   m.retstrg = SUBSTR(m.pstrg,1,AT(',',m.pstrg))

   * Now get the port designation (e.g., LPT1: or FILE:)

   * Check if the port passed is greater than the ports available.
   IF OCCURS(',',m.pstrg) >= m.pnum
      m.portstrg = SUBSTR(m.pstrg,AT(',',m.pstrg,m.pnum)+1)
   ELSE
      m.portstrg = SUBSTR(m.pstrg,AT(',',m.pstrg,1)+1)
   ENDIF

   IF AT(',',m.portstrg) > 0
      m.portstrg = LEFT(m.portstrg,AT(',',m.portstrg)-1)
   ENDIF

   RETURN m.retstrg + m.portstrg