ID: Q96289
2.00 2.50 MS-DOS kbprg kbprb
WARNING: The information in this article has not been confirmed or tested by Microsoft. Some or all of the information in this article has been taken from unconfirmed customer reports. ANY USE BY YOU OF THE INFORMATION PROVIDED IN THIS ARTICLE IS AT YOUR OWN RISK. Microsoft provides this information "as is" without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
The information in this article applies to:
When you are using the Report Writer, an Epson LQ-1050 printer will print the first page of the report correctly. However, the second page may start much farther down than expected.
The Short-Tear-Off mode is on.
Turn off the Short-Tear-Off mode by flipping DIP switch 7 in bank 2 to "off". Other Epson printers may have a different DIP switch setting. For more information about DIP switch settings, see the manual for your Epson printer.
Additional reference words: FoxDos 2.00 2.50 lq1050 unconfirmed KBCategory: kbprg kbprb KBSubcategory:
Last Reviewed: December 22, 1997