ID: Q92353
The information in this article applies to:
To run the Extended (32-bit) version of FoxPro 2.0 for MS-DOS with the Microsoft Windows version 3.0 or 3.1, do the following:
1. Use MS-DOS version 5.0, or higher as the operating system.
2. Use the EMM386.EXE file provided with MS-DOS to provide expanded
memory. The sample lines below provide 2 megabytes of expanded memory.
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE RAM 2048
NOTE: Windows version 3.11 for Workgroups does not run in Standard mode.
This is just one factor in the configuration of a machine. It is recommended to upgrade to the latest version of FoxPro, which can use the same memory configuration setup for Windows.
NOTE: In MS-DOS 6.0 and 6.2, a multi-config option is available which can be helpful. Using it, you can decide whether to boot to a configuration optimized for Windows, or for FoxPro 2.0 Extended.
For more information about the MS-DOS 6.0 and 6.2 multiple- configuration feature, refer to the "Using Multiple Configurations" section of Chapter 4 in the "User's Guide" or type "help multiconfig" (without the quotation marks) at the MS-DOS command prompt to access MS-DOS Help.
Additional reference words: FoxDos 2.00 3.10 KBCategory: kbenv kbtshoot KBSubcategory: FxenvMemory
Last Reviewed: May 19, 1995