ID: Q159364
The information in this article applies to:
This article contains a copy of the information in the Readme.txt file from the Windows CE H/PC Explorer CD-ROM. Setup copies this file to the Program Files\H/PC Explorer folder.
Readme.txt file for H/PC Explorer
1. Starting installation
2. Creating floppy disks of the CD-ROM installation files
3. Installing H/PC Explorer from floppy disks
4. If you encounter errors during H/PC Explorer Setup
5. H/PC Explorer on International versions of Windows 95
6. To remove/reinstall Schedule+ or Microsoft Exchange Update
7. If you are asked to replace MAPI32.DLL during setup
8. If Schedule+ says it cannot open the file req32.cfg
***** 1. Starting installation *****
To begin installation, insert the CD-ROM into your CD-ROM drive. The Setup program will automatically be run from the CD-ROM. If it does not start automatically, type "Start -> Run -> D:\Setup", where D: is the drive letter of your CD-ROM drive.
The main setup window will provide you with 3 buttons on the right hand side of the screen, labeled:
1. Install Microsoft Exchange Update for Windows 95 2. Install Microsoft Schedule+ 7.0a 3. Install Microsoft H/PC Explorer
Click each of these buttons *in this order*. If your desktop computer does not need to install a component, you will be informed with a message. If you do need the component, installation will automatically begin. Follow the instructions to complete the installation of each component.
NOTE: After some steps, you may be asked to reboot your desktop computer. After your computer finishes rebooting, reinsert the CD-ROM and continue with the remaining setup components.
***** 2. Creating floppy disks of the CD-ROM installation *****
If you do not have a CD-ROM drive on the PC that you wish to install H/PC Explorer on, then locate another machine with a CD-ROM drive and a 3.5" 1.44MB floppy drive. Use the following steps to create disks for floppy installation:
1. Find 9 blank, formatted 3.5" 1.44MB floppy disks. 2. Label three of these disks, "Microsoft Exchange Update" Disk 1 to Disk
3.
Disk2, Disk3) to the corresponding floppy disks you made in step 2.
NOTE: Do not copy the Disk1, Disk2 and Disk3 folders to the floppy
disks; copy the files *inside* of these folders to the disks.
Disk 1 to Disk 3.
Disk2, Disk3) to the corresponding floppy disks you made in step 5.
NOTE: Do not copy the Disk1, Disk2 and Disk3 folders to the floppy
disks; copy the files *inside* of these folders to the disks.
1 to Disk 3.
Disk2, Disk3) to the corresponding floppy disks you made in step 8.
NOTE: Do not copy the Disk1, Disk2 and Disk3 folders to the floppy
disks; copy the files *inside* of these folders to the disks.
You have now copied all of the files necessary to complete the installation of H/PC Explorer and all other supporting components. Proceed to the next section of this README file to install H/PC Explorer from floppy disks.
***** 3. Installing H/PC Explorer from floppy disks *****
There are three components that may need to be installed for H/PC Explorer to work correctly. Install (or determine that you do not require) them using the following instructions:
Install the Microsoft Exchange Update
1. You only need to install the Microsoft Exchange Update if you
have installed the version of Microsoft Exchange that came with
Windows 95. If Microsoft Exchange is already installed on your
computer, you can find the version in the About Microsoft
Exchange dialog box under the Help menu. If the version is
4.0.410.59, you must install the update. If Microsoft Exchange
is not installed, or the version number is greater than
4.0.410.59, DO NOT install the Microsoft Exchange Update.
2. The Microsoft Exchange Update can potentially cause serious
problems if installed on non-U.S. English versions of Windows
95. See section 5 of this README file for further details.
3. Insert the disk labeled "Microsoft Exchange Update Disk1" into
drive a:
4. From the Start Menu, choose Run.
5. Type a:\setup and click OK.
Install Microsoft Schedule+ 7.0a
1. You only need to install Microsoft Schedule+ 7.0a if you don't
already have Schedule+ 7.0a installed. You can check which
version is installed by looking at the introduction screen that
appears when you run Schedule+. If the version in the lower
right corner of this screen is 7.0a, DO NOT install Schedule+
7.0a from the floppy disks you made.
2. Insert the disk labelled "Microsoft Schedule+ 7.0a Disk1" into
drive a:
3. From the Start Menu, choose Run.
4. Type a:\setup and click OK.
Install H/PC Explorer
1. Insert the disk labelled "Microsoft H/PC Explorer Disk1" into
drive a:
2. From the Start Menu, choose Run.
3. Type a:\setup and click OK.
If you encounter any errors during H/PC Explorer Setup, the H/PC Explorer Help will assist you in finding the solution to the problem. To use H/PC Explorer Help, run H/PC Explorer by double-clicking its icon on the Windows desktop, or by selecting "Start -> Programs -> H/PC Explorer -> H/PC Explorer".
Once H/PC Explorer is running, select "Help -> H/PC Explorer Help Topics". In the "Contents" tab, double-click "Troubleshooting -> Communications problems -> Help me fix a specific communications error". Follow all the steps detailed in the Help.
If you cannot start H/PC Explorer, re-install H/PC Explorer by following the steps in the first section of this README file.
***** 5. H/PC Explorer on International versions of Windows 95 *****
The software products that come with your H/PC, including H/PC Explorer, the Microsoft Exchange Update, and Schedule+ 7.0a, are all U.S. English versions. Installation on versions of Windows 95 other than the U.S. English version is not supported.
Known issues include:
- The Microsoft Exchange Update can cause serious problems if installed on
non-U.S. English versions of Windows 95. Installing this update on any
installation of Windows 95 other than the U.S. English version is not
recommended or supported.
automatically dismissed. When you click OK to dismiss it, you will be
asked if you want to reboot your computer. Clicking Yes may abort setup
prematurely.
setup is complete.
These are the known issues; others may arise depending on the version of Windows 95 you are running as well as your particular software configuration.
***** 6. To remove/reinstall Schedule+ or Microsoft Exchange Update *****
If you need to uninstall or reinstall either Schedule+ 7.0a or the Microsoft Exchange Update from your computer, you need to use the setup programs on the CD-ROM that came with your H/PC. Attempting to do this by using Add/Remove Programs in the Control Panel will not work correctly.
To uninstall or reinstall the Microsoft Exchange Update:
- Insert the H/PC Explorer CD-ROM into your CD-ROM drive.
- Click the Start button, and choose Run.
- Type "d:\exupdusa\exupdusa.exe" where d: is the drive letter for
your CD-ROM, and press Enter.
- When the installation program runs, follow the instructions
provided. You will be given a number of options during the setup,
including Remove All, which will uninstall Microsoft Exchange,
and Reinstall, which will reinstall the Microsoft Exchange
Update.
To uninstall or reinstall Schedule+ 7.0a:
- Insert the H/PC Explorer CD-ROM into your CD-ROM drive.
- Click the Start button, and choose Run.
- Type "d:\splus70a\disk1\setup.exe" where d: is the drive letter
for your CD-ROM, and press Enter.
- When the installation program runs, follow the instructions
provided. You will be given a number of options during the setup,
including Remove All, which will uninstall Microsoft Schedule+
7.0a, and Reinstall, which will reinstall the Microsoft Schedule+
7.0a.
***** 7. If you are asked to replace MAPI32.DLL during setup *****
During H/PC Explorer setup, you may be warned that you are about to replace the currently installed MAPI32.DLL with an earlier version. If you see this message, choose to keep the newer version of MAPI32.DLL.
If you do not have the newer version of MAPI32.DLL, you may have difficulty using Schedule+ for group scheduling. If you are having problems with group scheduling, and if you did not keep the newer version of MAPI32.DLL during setup, you need to reinstall the Microsoft Exchange Update. Instructions for doing so can be found in section 6 of this README file.
NOTE: Reinstalling the Microsoft Exchange Update may lead to the problem described in section 8 of this README file. If it does, reinstall Schedule+ 7.0a after reinstalling the Microsoft Exchange Update to fix the problem.
***** 8. If Schedule+ says it cannot open the file req32.cfg *****
If an error message appears stating that Schedule+ cannot open the file req32.cfg, it is likely that you installed the Microsoft Exchange Update after you installed Schedule+ 7.0a. To fix this problem, reinstall Schedule+ 7.0a as described in section 6 of this README file.
Additional query words: hand held
Keywords : wince handheld
Version : 1.00
Platform : WINDOWSLast Reviewed: May 16, 1998