DOCUMENT:Q104562 08-NOV-1999 [pcmail] TITLE :PC DB: How to Remove Groups After Running ACCTONME.EXE PRODUCT :Microsoft Mail For PC Networks PROD/VER:WINDOWS:2.1,3.0,3.2 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Mail for PC Networks, versions 2.1, 3.0, 3.2 ------------------------------------------------------------------------------- SYMPTOMS ======== Before you run ACCTONME.EXE (see information below regarding obtaining this utility), it is advised that you delete all globally defined groups on your versions 2.1, 3.0, and 3.2 of Microsoft Mail for PC Networks. If this is not possible, or this step was not done, you will get the error Name already defined as a group address when you try to add a group name that previously existed. The following procedure explains how to resolve this problem. RESOLUTION ========== NOTE: The resetting of group files can be automated. For additional information, please see the following article in the Microsoft Knowledge Base: Q129500 Automating the Resetting of Group Files using GIMPORT The following steps assume that your Microsoft Mail for PC Networks database is located on the M: drive. NOTE: After each entry, you must press ENTER to get new "-" prompt. 1. COPY M:\GRP\ADMIN.GRP M:\GRP\ADMIN.BAK 2. DEBUG M:\GRP\ADMIN.GRP 3. At the "-" prompt, type: "rcx" (without the quotation marks) 4. At the ":" prompt, type: "8" (without the quotation marks) 5. At the "-" prompt, type: "f100,107,0" (without the quotation marks) 6. At the "-" prompt, type: "w" (without the quotation marks) 7. At the "-" prompt, type: "q" (without the quotation marks) 8. COPY M:\GRP\ADMINSHD.GRP M:\GRP\ADMINSHD.BAK 9. COPY M:\GRP\ADMIN.GRP M:\GRP\ADMINSHD.GRP 10. COPY M:\GLB\GROUP.GLB M:\GLB\GROUP.BAK 11. DEBUG M:\GLB\GROUP.GLB 12. At the "-" prompt, type: "rcx" (without the quotation marks) 13. At the ":" prompt, type: "4" (without the quotation marks) 14. At the "-" prompt, type: "f100,103,0" (without the quotation marks) 15. At the "-" prompt, type: "w" (without the quotation marks) 16. At the "-" prompt, type: "q" (without the quotation marks) 17. COPY M:\GLB\GRPMEM.GLB M:\GLB\GRPMEM.BAK 18. COPY M:\GLB\GROUP.GLB M:\GLB\GRPMEM.GLB 19. CD MEM 20. REN *.MEM *.BAK If any problems occur, restore all of the .BAK file and call Product Support Services. MORE INFORMATION ================ ACCTONME.EXE is available as part of the Database Maintenance Utilities document. This document describes operational details for utilities used to repair and maintain the database for Microsoft Mail for PC Networks. The procedures described apply to versions 2.1 and later of Microsoft Mail except where noted. To obtain the document containing the Database Maintenance Utilities, please see the following article in the Microsoft Knowledge Base: Q99419 PC DB: Database Maintenance Utilities (Complete) Additional query words: 2.10 3.00 3.20 ====================================================================== Keywords : Technology : kbMailSearch kbZNotKeyword3 kbMailPCN320 kbMailPCN300 kbMailPCN210 Version : WINDOWS:2.1,3.0,3.2 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.