DOCUMENT:Q80263 14-DEC-1999 [pcmail] TITLE :PC Gen: Contents of Modem Script File TELEBIT.MDM PRODUCT :Microsoft Mail For PC Networks PROD/VER:WINDOWS:2.1e OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Mail for PC Networks, version 2.1e ------------------------------------------------------------------------------- SUMMARY ======= The following is the contents of the Microsoft Mail version 2.1e modem script file TELEBIT.MDM, which can be compiled with SCRCOMP.EXE: ;********************************************************************* ; ; Microsoft Mail Script File ; ; Filename: telebit.mdm ; Date : Oct 26, 1990 ; Script : Standard script file for Telebit TrailBlazer modems ; History : Oct 26, 1990 - added support for T2500 model ; ; This script file contains the standard modem setup strings used ; by the External, Transmit and Listen programs. There are five ; procedures defined in this script file for setting up the modem and ; for connecting to a remote External machine. ; ; This script file is automatically invoked by using the -T ; command line option. ; ; The modem setup strings used here will be adequate for most ; people but there may be some changes required if you are dialing ; overseas and require a longer wait for Carrier Detect (S7 register) ; or if you wish to change the speaker volume. Note that if you used ; the -Innn option in version 1.0 or 2.0 that you will have to modify ; the S7 register and recompile this script file. ; ; Consult your modem manual for more information on setup options. ; ; Script procedures defined: ; INITIALIZE ; RESET ; CALL ; ANSWER ; DISCONNECT ; ; Return codes for External, Transmit, Listen: ; 0 - OK ; 1 - CONNECT 300 ; 2 - not defined ; 3 - NO CARRIER ; 4 - ERROR ; 5 - CONNECT 1200 ; 6 - not defined ; 7 - BUSY ; 8 - NO ANSWER ; 9 - not defined ; 10 - CONNECT 2400 ; 11 - not defined ; 12 - CONNECT 9600 (high speed connection) ; ; ;********************************************************************* INITIALIZE: title "Telebit TrailBlazer Script" baud 9600 ; set the baud rate display " Baud Rate : 9600" $attempts = 5 init_retry: sendln "ATZ" ; reset modem to default settings wait 2 waitrsp 1 if ("0" isin response) goto reset_okay if ("OK" isin response) { reset_okay: sendln "AT&FE0M1V0" wait 1 waitrsp 1 if ("0^M" isin response) { sendln "ATS0=0S7=45S9=6S10=50S12=50" sendln "ATS52=1S53=1S58=2S61=20S66=1&W" waitrsp 1 if (response = "0^M") return 0 } } dec $attempts if ($attempts > 0) goto init_retry return 4 RESET: baud 9600 ; set the baud rate display " Baud Rate : 9600" sendln "ATZ" ; reset modem to default settings waitrsp 1 if (response = "0^M") return 0 else return 4 CALL: $ret = 8 ; set default ret code to "no answer" clearrsp ; clear the response buffer echo 0 ; do not display phone number sendln "ATD" + dial_mode + phone_number ; execute the dial up echo 1 ; turn echo back on ring_loop: waitrsp 120 ; wait until the modem responds if (response = "1^M") { display ">>> CONNECT 300 <<<" $ret = 1 } else if (response = "3^M") { display ">>> NO CARRIER <<<" $ret = 8 ; no answer or no connect } else if (response = "5^M") { display ">>> CONNECT 1200 <<<" $ret = 5 } else if (response = "7^M") { display ">>> BUSY <<<" $ret = 7 ; busy } else if (response = "10^M") { display ">>> CONNECT 2400 <<<" $ret = 10 } else if (response = "12^M") { display ">>> CONNECT 9600 <<<" $ret = 12 } else if (response = "50^M") { display ">>> CONNECT FAST <<<" $ret = 12 } else if (response = "52^M") { $ret = 52 } if ($ret = 52) ; check for remote ring code, and ; ignore goto ring_loop return $ret ; return connect baud rate to ; application ANSWER: $ret = 8 ; set default ret code to "no answer" waitrsp 1 ; see if phone is ringing if (response = "2^M") ; 2 is numeric form of "RING" { if (listen = 1) ; see if Listen program is running or sendln "ATD" ; not answer phone in originate mode ; (Listen) else sendln "ATA" ; answer the phone normally waitrsp 120 ; wait until the modem responds if (response = "1^M") { display ">>> CONNECT 300 <<<" $ret = 1 } else if (response = "3^M") { display ">>> NO CARRIER <<<" $ret = 8 ; no answer or no connect } else if (response = "5^M") { display ">>> CONNECT 1200 <<<" $ret = 5 } else if (response = "10^M") { display ">>> CONNECT 2400 <<<" $ret = 10 } else if (response = "12^M") { display ">>> CONNECT 9600 <<<" $ret = 12 } else if (response = "50^M") { display ">>> CONNECT FAST <<<" $ret = 12 } } return $ret ; return connect baud rate to ; application DISCONNECT: wait 2 ; wait 2 seconds send "+++" ; send escape sequence to put modem ; back to command state wait 2 ; wait 2 seconds clearrsp ; clear the response buffer sendln "ATH0" ; hang up the phone waitrsp 1 ; wait for a response clearrsp ; clear response buffer return 0 ; always return OK Additional query words: 2.10 2.1 2.10e ====================================================================== Keywords : Technology : kbMailSearch kbZNotKeyword3 kbMailPCN210e Version : WINDOWS:2.1e ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.