DOCUMENT:Q86100 04-FEB-2002 [pcmail] TITLE :PC Win: MSMAIL.INI Entries in [Microsoft Mail] PRODUCT :Microsoft Mail For PC Networks PROD/VER::3.0,3.0b,3.2 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Mail for Windows, versions 3.0, 3.0b, 3.2 ------------------------------------------------------------------------------- SUMMARY ======= This article lists and explains all the entries in the Microsoft Mail for Windows private profile, MSMAIL.INI, that are contained in the [Microsoft Mail] section. [Microsoft Mail] ---------------- Entries in this section affect the behavior of the Mail program as well as the Microsoft Mail for PC Networks transport and name service. CheckLatencyInterval=: Affects the mail spooler's latency checking, which is intended to prevent the spooler's background processing from interfering unduly with foreground work. If this length of time passes without the spooler having any work to do, it will reinitialize its latency algorithm. The default value is 30 seconds. DemosEnabled=<0,1>: Adds the Demos option under the Help Menu. ExportMmfFile=: Identifies the path and filename of an .MMF file, pointing to the last place a mail folder was exported to. This entry is written by the Mail program and is used as a default value that is displayed in the Export Folders dialog box when you choose Export Folder from the File menu of the Mail program. FixedFont=: This entry identifies a fixed-pitch font you can substitute for the one supplied with Mail. It has four parts, separated by commas: the typeface name (not the font file name), point size, a flag for bold, and a flag for italic. This font serves as an alternative to the Helvetica 10-point font Mail uses by default; it is particularly handy for viewing messages that were created in a fixed-pitch font. (However, there is nothing to keep you from substituting a proportional font.) The View.Change Font command toggles the font between the normal font and the fixed font. Both entries affect only message body text, not message envelope text or folder lists. The default value is MsMail3, 9, 0, 0. ForceScanInterval=: Affects the mail spooler's latency checking, which is intended to prevent the spooler background processing from interfering unduly with foreground work. If this length of time passes without the spooler getting an opportunity to do outstanding work, it will begin requesting idle time more frequently (every ScanAgainInterval seconds), and eventually the spooler will begin stealing time whenever it can. Setting this entry to 1 is common practice for transport developers who want the spooler to process more often. The default value is 300 (5 minutes). GALOnly=<0/1>: If this entry is set to 1, the Mail address book will display only the Global Address List (GAL) and the Personal Address Book (PAB), thereby providing you with a flat address list of all the users visible from your postoffice. Note that you must be running against a Mail for PC Networks 3.0, 3.0b, or 3.2 postoffice with GAL support in order for this to work. If this entry is set to 0, the Mail address book will display all possible address lists and the PAB. GALOnly is currently supported only by the Mail for PC Networks name service provider. The default value is 0. IdleRequiredInterval=: Affects the mail spooler's latency checking, which is intended to prevent the spooler's background processing from interfering unduly with foreground work. The spooler defers its work temporarily if the system has serviced an interactive request within this interval, to avoid starting a transfer when you are busy. The default value is 2 seconds. LocalMMF=<0/1>: If this entry is 1, your .MMF file will be created in the Windows directory rather than on the postoffice the first time you run Mail. Together with the NoServerOptions entry, it prevents .MMF files from being stored on the postoffice; this is the normal state for the Windows for Workgroups Mail program. The default value is 0. Login=: Put your Mail for PC Networks mailbox name (short name, up to 10 characters) in this entry if you do not want to keep typing it in the Login dialog box. If you set both the Login and Password entries, the Login dialog will not appear when you start Mail; it will log you in automatically. If you only set the Login entry, Mail will still prompt for your password, but you won't have to type your name every time. MailBeep=: Set this entry to the path of a Windows .WAV file, and you will get a more interesting sound than the normal two beeps when new mail arrives. This entry will not work unless you have Multimedia Extensions for Windows installed, and the "Sound chime" option in the Mail Options dialog box is checked. The default value is blank. MailTmp=: Set this entry to a directory where you would like Mail to place temporary copies of attached files. When you launch an application by double-clicking a file attached to a mail message, Mail copies the file to this directory and invokes the application associated with it. The default value is the value of the TEMP environment variable. If there is no TEMP variable, the default is the Windows directory. MAPIHelp=: This entry points to the MAPI Help file and is used when you request help in any of the dialog boxes displayed by the MAPI support functions. This entry is defined when the Mail program is run the first time. The default value points to the MSMAIL.HLP file in your WINDOWS directory. Multi-Message=<0/1 >: This entry provides a default setting for the "Print multiple notes on a page" option in the Print dialog box, which appears whenever you print messages from Mail. Set it to 0 to have that option appear unchecked by default. The default value is 1, which causes the option to be checked by default. Netbios=<0/1>: Set this entry to 1 to enable NetBIOS notification of new mail delivery. NetBIOS notification provides quicker response to the arrival of new mail from users on your local postoffice. Only the Mail for PC Networks transport provider supports this entry. The default value is 0. NewMsgsAtStartup=<0/1>: Set this entry to 1 to have Mail download new messages as quickly as possible when it is started. If it is 0, the new mail will still come in, but relatively slowly (in the background while you work on other things). The default value is 0. NOTE: NewMessagesAtStartup= will also work for this entry. NextOnMoveDelete=<0/1/-1>: If this entry is 1, Mail automatically opens the next message in a folder after you delete or move an open message. If this entry is -1, Mail automatically opens the previous message, thus facilitating quick scanning through your Inbox. If this entry is 0, Mail will close the Read Note window as soon as you move or delete the message, and you will have to press the ENTER key or double-click to open the next message. Set this value to 1 if your messages are sorted in ascending order (that is, in the order received) and -1 if they are sorted descending (that is, most recent message first). The default value is 1. NoCheckInterval=<0/1>: Set this entry to 1 to have Mail disable the "Check for new mail every x minutes" field in the Mail Options dialog box. The default value is 0. NormalFont=: This entry identifies the default font (normally proportionally spaced) used to display Mail messages. It has four parts, separated by commas: the typeface name (not the font file name), point size, a flag for bold, and a flag for italic. The View Change Font command toggles the font between the Normal font and the Fixed font; the latter is handy for viewing messages that were created using a fixed-pitch font. Both entries affect only message body text, not message envelope text or folder lists; Mail always uses Helv 8 point for that purpose. (Under Windows 3.1, you can add Helv= in the [FontSubstitutes] section of your WIN.INI file to effect a wholesale substitution. However, keep in mind that all programs will be affected, not just Mail.) The default value is Helv, 10, 0, 0. NoServerOptions=<0/1>: If this entry is 1, the Server button in the Mail Options dialog box is unconditionally disabled. On the Mail server, this button calls up a sub-dialog box that enables you to relocate the .MMF file, among other things. Together with the LocalMMF entry, it prevents .MMF files from being stored on the postoffice at all; this is the normal state for the Windows for Workgroups Mail program. The default value is 0 (the Server button and dialog box are enabled). OfflineMessages=: This entry is written by the Mail for PC Networks transport provider whenever you choose to store your message file off the postoffice. It uses the entry to find the file quickly (without a file system browse dialog box) when you start up without connecting to the postoffice. Only the Mail for PC Networks transport supports this entry. The default value is the path specified in the Mail Options Server dialog box for a local message file. The entry is removed when you store your message file on the postoffice. OldStorePath=: This entry is written temporarily by the Mail for PC Networks transport while you are moving your message file (using the Mail Options Server dialog box), and contains the original path to the file if it was originally stored off the postoffice. This entry is removed once the move successfully completes, so you will only see it if your system stops (crashes) during a move. The default value is empty. Password=: Use this entry together with the Login entry, to tell Mail your account information without typing it into the Login dialog box. If you have no password, keep this entry in as "Password=". This is different from omitting the entry. Omitting the entry means you want to type your password (the default); "Password=" means you have a password and it is blank. PollingInterval=: This entry gives the default value for the "Check for new mail every x minutes" option in the Mail Options dialog box. Administrators can set this value in the MSMAIL.INI file at the share point from which users install the Windows client, to provide a uniform default value for the polling interval. When you run the Windows client for the first time, the value for PollingInterval is copied into the .MMF file. If the variable doesn't exist, the default value of 10 minutes is placed in the .MMF file. From then on, the value that is in the .MMF file controls the polling and the variable in the MSMAIL.INI file is ignored. Therefore, existing Windows client users must use the client interface to change the polling interval. To do this, choose Options from the Mail menu and change the value (x) for "Check for new mail every x minutes." Printer=, , : This is the default value for the printer to use for printing mail, which appears in the Mail print dialog box. Mail initially copies it from your WIN.INI file, then saves whatever you change it to in the MSMAIL.INI file. The default value is the default printer you specify using the Windows Control Panel. PrintFont=: This entry identifies the default point size for the defined font used by the Mail program to print mail messages. The actual font used to print the mail message is dependent on whether the mail message is set to be displayed using the fixed font (specified by the FixedFont value) or the normal font (specified by the NormalFont value). The default point size is 10. PumpCycleInterval=: Use this entry if you are a transport implementer who wants the spooler to check for new mail, recover from errors, and generally do things more often than once per minute. You will find the spooler stealing more time from your system, which is fine if you are debugging it. The default value is 60 seconds, or the value specified in the Mail Options dialog box (whose granularity is minutes). ReplyPrefix="": Mail uses this string (enclosed in quotation marks), if present, to distinguish your comments from the original message when you reply to mail. When you reply, the original message text is copied to the body of the reply message, and each line of the original is prefixed with this entry. "| " (a vertical bar followed by a blank space) is a popular value. The default value is empty. ScanAgainInterval=: Affects the mail spooler's latency checking, which is intended to prevent the spooler's background processing from interfering unduly with foreground work. When the spooler defers its work because of higher-priority interactive tasks, it will recheck the availability of the system at this interval. The default value is 2 seconds. Security=<0/1>: If this entry is 1, Mail prompts for your password whenever its window is restored from its icon state. That is, if Mail is minimized and you double-click the icon, you must re-enter your password before you (or anyone else) can see your messages. The default value is 0. ServerDrive=: If this entry is present, Mail looks for the postoffice in the default directory on this drive. Both the MAIL.DAT file and the ServerPath entry take precedence, however. Only the Mail for PC Networks transport supports this entry. The default value is drive M. ServerPassword=: This entry identifies the password used to connect to the server specified by the ServerPath entry. This entry should be used to specify the password for the file share if the ServerPath entry is specified using the universal naming convention (UNC) and the server name, share name, or path contains spaces. ServerPath= ServerPath=<\\server\share\path> : If this entry is present, Mail looks for the postoffice in the directory specified. The first form of this entry, with a normal path, works on all networks. The second form works only on Microsoft networks and compatible networks; if you use it, Mail connects dynamically (without using a drive) to the file server where the postoffice resides. Only the Mail for PC Networks transport supports this entry. There is no default value. SharedExtensionsDir= SharedExtensionsDir=<\\server\share\path> : If this entry is present, Mail looks for custom commands and messages in the directory specified. A file named SHARED.INI in that directory will tell Mail what shared extensions to load. You can specify additional extensions in your own MSMAIL.INI. To simplify updating the extensions, Administrators will often provide a common share point for extensions to Mail; this entry makes it work. The first form of this entry, with a normal path, works on all networks. The second form works only on Microsoft networks and compatible networks; if you use it, Mail connects dynamically (without using a drive) to the file server where the shared extensions reside. There is no default value. SharedFolders=<0/1>: This entry enables the use of Mail shared folders. This feature is always available when Mail is being used with the Mail for PC Networks postoffice. By default, it is unavailable when you use Mail with other mail systems; you must use this entry, along with the SharedFolders entry in the [Providers] section and perhaps other entries, to enable it then. The default value is 1 if the Logon entry in the [Providers] section is MSSFS, and 0 otherwise. SpoolerBackoffInterval=: The mail spooler waits this long before retrying an operation that has failed due to a mail server error condition classified as transient, such as a locked file. The default value is 2000 (2 seconds). SpoolerReconnectInterval=: The mail spooler waits this long before retrying an operation that has failed due to a mail server error condition classified as fatal, such as a lost network connection. The default value is 60 (one minute). StripGatewayHeaders=<0/1>: If this entry is 1, message header text (coming above the dashed line) will be stripped from Mail messages that arrive via a gateway. Set this entry to 0 if you want to see the extended information supplied by the gateways, which typically includes information such as message identifiers specific to the foreign mail system. Message header text supplied by native Mail for PC Networks clients is always stripped. Only the Mail for PC Networks transport supports this entry. The default value is 1 (you don't see gateway information). WG=<0/1>: When Microsoft Mail is started, it determines whether or not it is running with Microsoft Windows for Workgroups by checking the copyright information that has been stamped into the MSMAIL.EXE file. The result of this check is written to the MSMAIL.INI file as the "WG=" entry. This setting controls which caption shows in Microsoft Mail. If the entry is "WG=1", which indicates Windows for Workgroups, the caption is "Mail"; if "WG=0", which indicates Microsoft Mail for PC Networks 3.0, 3.0b, or 3.2, the caption is "Microsoft Mail." Window=: This entry consists of eight numbers that govern the display of the main Mail window. It is written automatically when you exit Mail, so changes you make while Mail is running will be lost. The first four numbers are pixel coordinates for the four sides of the main window: left, right, top, and bottom. The fifth number is 1 if the main window is in a normal (restored) state, 2 if it is maximized (zoomed), and 3 if it is minimized (icon). The remaining three numbers determine whether the Toolbar, status bar, and scroll bars are displayed on the main window: 0 means do not display the corresponding bar, and 1 means display it. The defaults for this entry are: - Window size and location determined by Windows - Zoom state normal (restored) - Toolbar on - Status bar on - Scroll bars on Additional query words: 3.00 3.00b 3.20 Microsoft Mail append ====================================================================== Keywords : Technology : kbMailSearch kbZNotKeyword3 kbMail300 kbMail320 kbMail300b Version : :3.0,3.0b,3.2 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.