DOCUMENT:Q127729  05-NOV-1999  [pcmail]
TITLE   :X400: Sample TP4 Configuration Files
PRODUCT :Microsoft Mail For PC Networks
PROD/VER:MS-DOS:3.2
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Mail Gateway to X.400, version 3.2 
-------------------------------------------------------------------------------

SUMMARY
=======

The following are examples of the AUTOEXEC.BAT, CONFIG.SYS, and PROTOCOL.INI
files for an X.400 gateway using TP4 as the transport stack. It is assumed that
the gateway computer has a DEC DEPCA Ethernet card in it.

AUTOEXEC.BAT
------------

   Prompt $p$g
   Echo Off
   set path =c:\dos
   set tmp =c:\tmp
    
   lh doskey
   lh mouse
    
   @REM ==== LANMAN 2.2a ====
   SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
   c:\tp4\drivers\tp4.exe
   NET START workstation full
   LOAD NETBEUI
   NET LOGON
   @REM ==== LANMAN 2.2a ====

CONFIG.SYS
----------

   device=c:\dos\himem.sys /testmem:off
   device=c:\dos\emm386.exe noems /x=D000-DFFF
   dos=high,umb
   files=30
   shell=c:\dos\command.com c:\dos\ /p
    
   LASTDRIVE=Z
   DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
   DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\DEPCA\DEPCA.DOS
   device=c:\tp4\drivers\dli.dos

PROTOCOL.INI
------------

   [PROTMAN]
     DRIVERNAME = PROTMAN$
     DYNAMIC = YES
     PRIORITY = NETBEUI
    
   [CLNS]
     DRIVERNAME = CLNS$
     NTC        = 6
    
   [PLUTO]
     DRIVERNAME = PLUTO$
     BINDINGS   = "DEPCA_NIF"
     NBUF       = 4
     NTC        = 7
    
   [NETBEUI_XIF]
     Drivername = netbeui$
     SESSIONS = 6
     NCBS = 12
     BINDINGS = "DEPCA_NIF"
     LANABASE = 0
    
   [DEPCA_NIF]
    
   ; PROTOCOL.INI section for the DEC EtherWORKS (MC, LC, Turbo, & DEPCA)
   ; Adapters

       DriverName   = DEPCA$
       MaxMulticast = 12
       MaxTransmits = 32
       AdapterName  = DE200
       RamAddress   = 0xD000
       Interrupt    = 5
    
   ;  use Interrupt = 5 for turbo board

Additional query words:

======================================================================
Keywords          :  
Technology        : kbMailSearch kbMailGateSearch kbZNotKeyword3 kbMailGatex400320
Version           : MS-DOS:3.2

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.