Pressing NUM LOCK Key Does Not Turn On the Number Lock Setting

ID: Q175882

The information in this article applies to:

Microsoft Natural Keyboard version 1.0

SYMPTOMS

When you press the NUM LOCK key, the Number Lock setting on the Natural Keyboard may not turn on.

CAUSE

This behavior can occur if you have pen or touch-screen device software installed on the computer. This software can turn off the Number Lock keyboard setting.

RESOLUTION

To work around this behavior, you can temporarily disable the pen or touch-screen device. To disable the device, use the following steps:

1. Click Start, point to Settings, and then click Control Panel.

2. Double-click System.

3. Click the Device Manager tab.

4. Double-click the Ports branch to expand it.

5. Double-click the port to which the pen or touch-screen device is

   connected.

6. In the Device Usage area on the General tab, click the Original

   Configuration (Current) check box to clear it.

   NOTE: If you are using Windows 95 OEM Service Release 2, click the
   Disable In This Hardware Profile check box to select it.

7. Click OK.

8. If you are prompted to restart the computer, click Yes.

To enable your pen or touch-screen device, follow the steps above, but in step 6, select or clear the check box you cleared or selected.

STATUS

Microsoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

Additional query words: keypad pad 1.00

Keywords          : kbenv kbtool mnk intellitype 
Version           : WINDOWS:1.0
Platform          : WINDOWS

Last Reviewed: October 30, 1997