"Invalid Destination Folder" Error Performing Admin Install

ID: Q136091

The information in this article applies to:

SYMPTOMS

When you run an administrative installation (Setup /a) of one of the programs listed at the beginning of this article, you may receive the following error message when you change the destination folder for the program

   The specified folder:

   '<path>'

   is invalid, incomplete, too long, or write-protected. Enter a full
   path with the drive letter; for example 'C:\APPS'.

where <path> is the location on the server in which you are installing the program.

CAUSE

This error message appears when you change the destination for the administrative installation to one of the following:

For example, this error message appears if you enter the following destination for an administrative installation:

   \\server\share\Msoffice

   -or-

   f:\Office 95

When you perform an administrative installation, you must install the program to a path using a drive letter (such as f:) and you must use 8.3 folder names.

RESOLUTION

To avoid receiving this error message when you perform an administrative installation, enter a destination that uses a drive letter and 8.3 folder names. The following examples are valid destinations for an administrative installation:

   f:\Msoffice

   -or-

   f:\Word95


Additional query words: 2.00 3.00 4.10 7.00 8.00 OFF7 xl7 95 97 off97
Keywords          : projwin offwin offwinsetup xlwin ppt95 ppt97 
Version           : 2.00 3.00
Platform          : WINDOWS

Last Reviewed: May 6, 1998