Office 4.x Err Msg: "Insufficient Memory to Run Application"ID: Q118457
|
When you run the Microsoft Office Setup from disks, the installation initially appears to run successfully. However, after 10 to 20 seconds, the system may return the following error message:
Insufficient memory to run application. 900K required.
During Setup a temporary (temp) directory will be written to the last
available local drive.
This error message appears because of an incorrect tempdir setting in the
SETUP.LST. The TmpDirSize is set to 900, but it should be set to 2500.
Note that simply changing the tempdir setting will not resolve the problem
if you do not have a valid temp directory. For example, the set temp line
in your Autoexec.bat points to a directory that doesn't exist.
Compressed drives that have less than 2.5 megabytes (MB) on the
uncompressed drive may also receive an insufficent memory message.
To correct this problem, do the following:
[Params]
WndTitle = Microsoft Office Setup
WndMess = Starting Office Setup, please wait...
***Change the next line to TmpDirSize = 2500
TmpDirSize = 900
TmpDirName = ~msstfqf.t
CmdLine = acmsetup /T setup.stf /S %s %s
DrvModName = ACMSETUP
Require31 = This program requires Windows (R) 3.1 or higher.
Microsoft has confirmed this to be a problem in the Microsoft Products
listed at the beginning of this article. We are researching this problem
and will post new information here in the Microsoft Knowledge Base as it
becomes available.
For additional information, please see the following article in the
Microsoft Knowledge Base:
Q113432 Office Error Msg: "Cannot Find CTL3D.DLL" During Installation
Additional query words: 900kb 2500k 2500kb word6 powerpt access money
Keywords : offwin
Version : WINDOWS:4.0,4.0a,4.0c,4.2,4.3,6.0,6.0a,6.0c
Platform : WINDOWS
Issue type :
Last Reviewed: May 7, 1999