OFFICE: RAM Doubler Update Available for Use with Power MacID: Q121363
|
~ MC1063.hqxFor more information about downloading files from the Microsoft Software Library, please see the following article in the Microsoft Knowledge Base:
Q119591 How to Obtain Microsoft Support Files from Online Services
THE TEXT OF MC1063
==================
======================================================================
Microsoft(R) Product Support Services Application Note (Text File)
MC1063: CONNECTIX(R) RAM DOUBLER 1.5.1
UPDATER FOR USE WITH THE POWER MACINTOSH(TM)
======================================================================
Revision Date: 12/94
1 Disk Included
The following information applies to Microsoft Office for the
Macintosh, version 4.2.
--------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an Application |
| Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER |
| EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR |
| PURPOSE. The user assumes the entire risk as to the accuracy and |
| the use of this Application Note. This Application Note may be |
| copied and distributed subject to the following conditions: 1) All |
| text must be copied without modification and all pages must be |
| included; 2) If software is included, all files on the disk(s) |
| must be copied without modification; 3) All components of this |
| Application Note must be distributed together; and 4) This |
| Application Note may not be distributed for profit. |
| |
| Copyright (C) 1994 Microsoft Corporation. All Rights Reserved. |
| Copyright (C) 1994 Connectix Corporation. All Rights Reserved. |
| Microsoft is a registered trademark of Microsoft Corporation. |
| Apple and Macintosh are registered trademarks and Power Macintosh |
| is a trademark of Apple Computer, Incorporated. Connectix is a |
| registered trademark of Connectix Corporation. PowerPC is a |
| trademark of International Business Machines Incorporated. |
-------------------------------------------------------------------
INTRODUCTION
============
Connectix RAM Doubler version 1.0.4, which ships with Microsoft Office 4.2,
cannot be installed on a Power Macintosh.
The MC1063 disk provided with this Application Note contains the Connectix
RAM Doubler 1.5.1 Updater file, which you can use to install Connectix RAM
Doubler version 1.5.1 on a Power Macintosh. Note that if you can install
Connectix RAM Doubler version 1.0.4 on your Macintosh (that is, if you do
not have a Power Macintosh), you can use this same file to update your
current version of Connectix RAM Doubler to version 1.5.1. Connectix RAM
Doubler version 1.5.1 provides the following enhancements to version 1.0.4:
- Compatibility with the Power Macintosh. Connectix RAM Doubler 1.5.1
supports Macintosh computers equipped with a PowerPC(TM), 68040, 68030,
or 68020 (with Paged Memory Management Unit [PMMU]) processor.
- Compatibility with SCSI Manager 4.3.
- Improved functionality with GeoPort on the Power Macintosh.
- Compatibility with CD AllCache.
- Increased reliability with file sharing on the Power Macintosh.
- File mapping for the Power Macintosh. File mapping is a technology
that allows for a reduction in memory requirements by using the memory
management unit to manage the loading and unloading of native code
segments.
- Improved reliability with 4- and 5-megabyte (MB) Macintosh computers
running in 24-bit addressing mode.
- Better compatibility with Apple(R) System 7.5.
UPDATING TO CONNECTIX RAM DOUBLER 1.5.1
=======================================
To use the Connectix RAM Doubler 1.5.1 Updater file on the enclosed MC1063
disk, you must have one of the following:
- A master disk containing version 1.0.4 or earlier of Connectix RAM
Doubler Installer.
-or-
- Version 1.5 or earlier of Connectix RAM Doubler installed on your
computer.
NOTE: To find out about known incompatibilities with version 1.5.1 of
Connectix RAM Doubler and to find out how to contact Connectix
Corporation, read the Connectix RAM Doubler Read Me file on the enclosed
MC1063 disk.
Updating to Version 1.5.1 If You Are Using a Power Macintosh
============================================================
If you are using a Power Macintosh, you need to create a master disk
containing version 1.0.4 of Connectix RAM Doubler Installer, and then you
need to update the installer on the master disk to version 1.5.1. You can
then use the updated installer on this master disk to install Connectix RAM
Doubler 1.5.1 on your computer.
To create a master disk that contains version 1.0.4 of the Connectix RAM
Doubler Installer
1. Insert a blank floppy disk in your Macintosh floppy disk drive and
change the name of the disk icon to RAM DOUBLER. (For information
about naming icons and copying files on your Macintosh, see the
"Macintosh User's Guide".)
2. Select the RAM Doubler disk icon, and choose Eject Disk from the
Special menu. Insert Microsoft Office version 4.2 Install Disk 1,
double-click the Install Disk 1 icon, and then double-click the
Special Offer--RAM Doubler folder.
3. From the Special Offer--RAM Doubler folder, copy the RAM Doubler
Installer and RAM Doubler Read Me files to the RAM Doubler disk.
4. Drag the RAM Doubler disk and Install Disk 1 icons to the Trash to
remove them from the desktop.
To update the installer on the master disk
1. Create a new folder on your hard disk called 1.5.1 Update.
2. Insert the MC1063 disk in your floppy disk drive and copy the RAM
Doubler 1.5.1 Updater and RAM Doubler 1.5.1 Updater Read Me files
to the 1.5.1 Update folder on your hard disk. Drag the MC1063 disk
icon to the Trash to remove it from the Macintosh desktop.
3. Insert the RAM Doubler master disk in the floppy disk drive, and then
double-click the RAM Doubler 1.5.1 Updater icon in the 1.5.1 Update
folder on your hard disk.
4. In the Connectix RAM Doubler 1.5.1 Updater dialog box, choose the
Update Master Disk button.
When the Connectix RAM Doubler Updater has successfully updated the
Installer, a dialog box will appear confirming the update.
To install Connectix RAM Doubler 1.5.1 on your computer
1. With the RAM Doubler master disk in your floppy disk drive,
double-click the updated Connectix RAM Doubler Installer icon.
NOTE: The OLD folder on the RAM Doubler master disk contains the
old version of the Connectix RAM Doubler Installer and Connectix
RAM Doubler Read Me files. Do not double-click the Connectix RAM Doubler
icon in this folder.
2. In the Connectix RAM Doubler dialog box, choose Install.
3. Enter the appropriate information in the Your Name and Company boxes,
and choose OK.
4. Choose the Restart button in the dialog box that appears with the
message that Connectix RAM Doubler has been installed.
UPDATING TO 1.5.1 IF VERSION 1.5 OR EARLIER CAN BE INSTALLED ON YOUR
COMPUTER
1. If you have not already installed a version of Connectix RAM Doubler,
run the Connectix RAM Doubler Installer that ships with Microsoft
Office version 4.2.
2. Insert the enclosed MC1063 disk in your floppy disk drive and
double-click the disk icon to open it.
3. Double-click the Connectix RAM Doubler 1.5.1 Updater icon on the
MC1063 disk.
4. In the Connectix RAM Doubler 1.5.1 Updater dialog box, choose the
Update button to update the version of Connectix RAM Doubler that
is installed on your hard disk.
5. Choose OK when the dialog box appears with the message that your
Connectix RAM Doubler extension has been updated to 1.5.1.
Keywords : kb3rdparty kbappnote kbfile kbsetup kbdta offmac
Version : MACINTOSH:4.2
Platform : MACINTOSH
Issue type : Last Reviewed: June 2, 1999