OFF4: Error When Patching Older Version of ClipArt Gallery

ID: Q150578

The information in this article applies to:

SYMPTOMS

When you attempt to patch the ClipArt Gallery program you may see a message similar to the following:

   "ClipArt Gallery" (version 0.1.2) is older than version 0.1.4.

   This patch cannot be applied.

The only option button available is the Cancel button.

CAUSE

The patch was designed to work with version 0.1.4. You will not be able to patch any other version of the ClipArt Gallery.

RESOLUTION

To resolve this problem, use the following steps to remove the old ClipArt Gallery and then re-install ClipArt Gallery version 0.1.4.

Remove the ClipArt Gallery

1. Back up your original ClipArt Gallery to a disk, and then delete the

   ClipArt Gallery from your computer.

   NOTE: The ClipArt Gallery program is normally located in the Microsoft
   folder.

2. Run Microsoft Office Setup or Microsoft PowerPoint Setup.

   Setup should be started in maintenance mode.

3. Click the Add/Remove button.

4. Under Installed Components, click the option triangle for Shared

   Applications.

   This reveals a list of all installed Shared Applications. If ClipArt
   Gallery does not appear in this list, skip the remaining steps and go to
   the "Add the ClipArt Gallery" section.

5. Clear (remove the X from) all items within the Shared Application
   section with the exception of ClipArt Gallery.

   After you complete this step, you should see marks in only two check
   boxes: ClipArt Galley and Shared Applications.

6. Click the Continue button to remove ClipArt Gallery and its registration
   information.

7. Double check that no ClipArt Gallery application exists on the hard
   disk drive.

Add the ClipArt Gallery

1. Run Microsoft Office Setup or Microsoft PowerPoint Setup again.

2. Under Components Not Yet Installed, click the option triangle for Shared

   Applications.

3. Clear (remove the X from) all items within the Shared Application
   section with the exception of ClipArt Gallery.

   When you have completed this step, you should see marks in only two
   boxes: ClipArt Galley and Shared Applications.

4. Click the Continue button to install the ClipArt Gallery.

Attempt to run the patch again. If the version of ClipArt Gallery on your installation disks is version 0.1.4, the patch should now work.

STATUS

Microsoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

MORE INFORMATION

When the patch mentions ClipArt Gallery version 0.1.2, it is not referring to the version displayed in the Get Info window. It is referring to the version listed in the vers resource. This vers resource is only visible after you open the ClipArt Gallery with a special development tool.

After the patch is applied to the ClipArt Gallery, the version listed in the Get Info window will change from 1.1 to 1.1a.

TIP: Enable Show Version within the Views Control Panel. When you view the Microsoft folder by Name, Size, Kind, Label, or Date, the short version string (0.1.2 or 0.1.4) will be visible.

REFERENCES

For additional information, please see the following article(s) in the Microsoft Knowledge Base:

   ARTICLE-ID: Q99817
   TITLE     : ClipArt Gallery 1.1a Patch Available for Power Macintosh

   ARTICLE-ID: Q135257
   TITLE     : ClipArt Object Appears as a Gray Hashed Box

   ARTICLE-ID: Q139993
   TITLE     : ClipArt Image Does Not Appear with System 7.5.2

Additional query words: 4.00 patch doesn't does not wont work cag fail mmm modern memory manager
Keywords          : kberrmsg kbole
Version           : MACINTOSH:1.1
Platform          : MACINTOSH
Hardware          : MAC
Issue type        : kbprb

Last Reviewed: February 3, 1998