ID: Q116331
1.00 WINDOWS kbui
The information in this article applies to:
In Microsoft Query, when you choose Cue Cards from the Help menu, or when you choose a Help topic that uses a Cue Card, the MS Query Cue Cards screen does not appear.
The file Ccard100.ini, located in your Windows folder, contains information about where the Cue Cards for Microsoft Query version 1.0 will be displayed on the screen. If the numbers are incorrect, the Cue Cards may be displayed off of the screen. You will not receive an error message alerting you to this problem.
To work around this problem, do the following:
1. Close Microsoft Query, and rename or delete the Ccard100.ini file
(located in your Windows folder).
2. Start Microsoft Query again to access the Cue Cards.
This procedure will create a new Ccard100.ini with the default settings for the current video resolution.
The Ccard100.ini contains settings for the Cue Cards. For example, if you have Microsoft Query version 1.0 installed, Ccard100.ini will contain the following section:
[msquery.cue]
left=0.698750
top=0.150000
lleft=0.218750
ltop=0.150000
These numbers are a percentage of the screen for the two types of cards
(small and large) that Cue Cards has. For example, left=0.698750 means that
the small card left margin will be placed at approximately 69-percent to
the left of the current screen.
If the positions specified in this section are positions that do not show on the screen, the Cue Cards will be displayed off of the screen. For example, the following section would display the Cue Cards off of the screen on an 800x600 video resolution:
[msquery.cue]
left=1.000000
top=1.000000
lleft=8.000000
ltop=33.000000
KBCategory: kbui
KBSubcategory: xlquery
Additional reference words: 1.00 disappear invisible visible
Keywords : xlquery
Version : 1.00
Platform : WINDOWS
Last Reviewed: September 15, 1996