DOCUMENT:Q151818  11-JAN-2001  [vbwin]
TITLE   :HOWTO: Build a Setup Program Creating Multiple Groups/Icon
PRODUCT :Microsoft Visual Basic for Windows
PROD/VER:WINDOWS:4.0,5.0
OPER/SYS:
KEYWORDS:kbVBp400 kbVBp500 kbGrpDSVB kbDSupport

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Visual Basic Professional Edition for Windows, version 5.0 
 - Microsoft Visual Basic Enterprise Edition for Windows, version 5.0 
 - Microsoft Visual Basic Professional Edition, 16-bit, for Windows, version 4.0 
 - Microsoft Visual Basic Professional Edition, 32-bit, for Windows, version 4.0 
 - Microsoft Visual Basic Enterprise Edition, 16-bit, for Windows, version 4.0 
 - Microsoft Visual Basic Enterprise Edition, 32-bit, for Windows, version 4.0 
-------------------------------------------------------------------------------

SUMMARY
=======

By default, the Visual Basic 4.0 Setup Wizard creates one program group using
the project name, and one icon within the program group for the executable file
generated by the project. This article shows how to create additional program
groups and more than one icon within a group for any additional executable files
you want to ship by customizing the Visual Basic Setup Toolkit's SETUP1.VBP
project.

MORE INFORMATION
================

The SETUP1.VBP project in the Visual Basic 4.0 Setup Toolkit has two functions
defined in the SETUP1.BAS file, CreateOSProgramGroup() and CreateOSLink(), that
allow you to add program groups and icons. By default, the Form_Load event of
SETUP1.FRM calls these two functions to create only one program group and one
program icon. More program groups and icons can be added by calling these two
functions multiple times and specifying new group names and additional
executable file names. After you rebuild the SETUP1.EXE file, the modified
version will be used in subsequent Setup programs created by the Visual Basic
Setup Wizard. The SETUP1.VBP project is located in \SETUPKIT\SETUP1 subdirectory
of the main Visual Basic directory.

NOTE: Customizing SETUP1.EXE will make it unusable for other projects.

Step-by-Step Example
--------------------

1. Backup all files in \SETUPKIT\SETUP1 subdirectory of the main Visual Basic
   directory. This directory is also mirrored on the product CD-ROM in the
   VB\SETUPKIT\SETUP1 directory.

2. Load SETUP1.VBP, and locate the Form_Load event of the SETUP1.FRM.

3. In Form_Load event, look for the section with the following comments:

         '
         'Create program groups and icons (or links, i.e. shortcuts)
         '

4. Find the lines where CreateOSProgramGroup() and CreateOSLink() are called:

         CreateOSProgramGroup frmSetup1, strGroupName, strGrpPath
         CreateOSLink frmSetup1, gsDest.strAppDir & gstrAppExe, "", _
         gstrAppName

5. Comment out those lines.

6. Before the line:

         If fCreateGroup Then

         set fCreateGroup and fAdditionalIcons to TRUE:

         fCreateGroup = TRUE
         fAdditionalIcons = TRUE

7. Suppose this setup program will create one program group called MyGroup1 that
   contains MyExe1.Exe and MyExe2.Exe, and another group called MyGroup2 that
   contains MyExe3.Exe and MyExe4.Exe. Suppose that the destination directory
   for each of the EXE files is $(APPPATH) [ASCII 150] the default. In the
   places where CreateOSProgramGroup and CreateOSLink are originally called
   (step 4), type in the following code:

         CreateOSProgramGroup frmSetup1, "MyGroup1", "MyGroup1.GRP"
         CreateOSLink frmSetup1, gsDest.strAppDir & "MyExe1.EXE", "",_
         "MyExe1", TRUE
         CreateOSLink frmSetup1, gsDest.strAppDir & "MyExe2.EXE", "",_
         "MyExe2", TRUE

         CreateOSProgramGroup frmSetup1, "MyGroup2", "MyGroup2.GRP"
         CreateOSLink frmSetup1, gsDest.strAppDir & "MyExe3.EXE", "",_
         "MyExe3", TRUE
         CreateOSLink frmSetup1, gsDest.strAppDir & "MyExe4.EXE", "",_
         "MyExe4", TRUE

NOTE: Under Windows NT, a program remover icon is created at the last program
group. For this example, the icon will be at MyGroup2.

1. Build SETUP1.EXE.

2. Use Setup Wizard to build the setup program. This setup program will create
   two program groups, and each program group will contain two EXE files.

3. Restore the original SETUP1.VBP files to the \SETUPKIT\SETUP1 subdirectory of
   your main Visual Basic directory.

Additional query words:

======================================================================
Keywords          : kbVBp400 kbVBp500 kbGrpDSVB kbDSupport 
Technology        : kbVBSearch kbAudDeveloper kbZNotKeyword6 kbZNotKeyword2 kbVB500Search kbVBA500 kbVB500 kbVB400Search kbVB400 kbVB16bitSearch
Version           : WINDOWS:4.0,5.0
Issue type        : kbhowto

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.