DOCUMENT:Q76780 20-DEC-2000 [winmisc] TITLE :README.TXT: General Notes About Applications PRODUCT :Miscellaneous Windows Products PROD/VER::1.0 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows with Multimedia Extensions, version 1.0 ------------------------------------------------------------------------------- SUMMARY ======= The following information is contained in the Windows with Multimedia Extensions version 1.0 README.TXT file. The Setup program copies this file to the Windows with Multimedia Extensions directory. This information does not apply to later versions of Windows. MORE INFORMATION ================
This section includes important information about other problems you might encounter running applications with Windows 3.0. Running Non-Windows Applications -------------------------------- If you have problems with your display when you try to run two non-Windows applications and Windows in 386 enhanced mode, add the following line to the [386Enh] section of your SYSTEM.INI file: local=EGA$ Increasing Your Display's Update Speed -------------------------------------- If a non-windows application running in 386 enhanced mode Windows seems to be updating the display very slowly, try creating or modifying the application's program information file (PIF). Check the application's PIF file to make sure none of the Monitor Ports check boxes are selected in the Advanced Settings dialog box. On some displays, canceling the Monitor Ports options might mean that you cannot switch back to the application after switching away. In this case, you must exit the first application before starting another. See "Monitor Ports," in the HyperGuide PIF Editor Advanced Options for more information about this setting. The PIF Editor is part of the Accessories Group in HyperGuide. Running Windows 2.x and Windows 3.0 ----------------------------------- * If you have both versions of Windows on your hard disk, make sure that the directory containing Windows 3.0 is included in the PATH command in your AUTOEXEC.BAT, not the directory for Windows 2.x. * Because Windows searches the current directory before it searches other directories in the PATH command, when you want to run an application, print, install a printer, or install any other drivers in Windows 3.0, make sure the Windows 2.x directory is not the current directory. * If you want to run Windows versions 2.x and 3.0 on the same computer at different times, make sure that your CONFIG.SYS file includes the Windows 3.0 HIMEM.SYS driver. * If you use SMARTDrive or RAMDrive with Windows/386 2.x, make sure the drivers are 2.x drivers. The Windows 3.0 drivers for SMARTDrive and RAMDrive will not work with Windows/386 2.x. Omit the APPEND, JOIN, and SUBST MS-DOS Utilities ------------------------------------------------- The MS-DOS utilities APPEND, JOIN, and SUBST can cause problems when you are running Windows 3.0. If you included APPEND, JOIN, or SUBST in your AUTOEXEC.BAT file, remove them and refrain from running them within Windows. Running Batch Files and Embedded Macros --------------------------------------- If you want to run a batch file with a Windows application that uses embedded macro language, do so from a PIF. If you will be running it with Windows in 386 enhanced mode, make sure that the Background check box in the batch file's PIF is not selected. That way the batch file will run exclusively, causing the Windows application to pause until processing is complete. To learn about creating PIFs, see the HyperGuide section entitled "Creating PIFs for Batch Files," in the PIF Editor procedures. The PIF Editor is part of the Accessories Group in HyperGuide. Using SHARE.EXE with Windows ---------------------------- To prevent two applications from modifying the same file, run the MS-DOS utility, SHARE.EXE, before you start Windows. It will not work correctly if you run it from within Windows. See your MS-DOS documentation for details about what SHARE.EXE does and how to install it. Preventing Stack Overflow ------------------------- Stacks are temporary data structures that MS-DOS and applications use for processing hardware events. If you receive the Internal Stack Overflow message when you are running Windows in 386 enhanced mode, you need to change your stacks= setting. * If your system uses MS-DOS 3.2, include the following line in your CONFIG.SYS file: stacks=9,192 * If your system uses MS-DOS 3.3 or above, include the following line in your CONFIG.SYS file: stacks=0,0 Selecting a Port for a Serial Mouse ----------------------------------- Do not try to run your serial mouse from a COM3 or COM4 port. Windows supports serial mice on COM1 and COM2 only. Running Windows from the OS/2 version 1.2 DOS Compatibility Box --------------------------------------------------------------- * Do not allow Windows Setup to make changes to your AUTOEXEC.BAT file or CONFIG.SYS file. Make the appropriate changes yourself. * To print, you must set the printer driver port to one with an .OS2 extension as follows: If your printer is physically connected to LPT1 or to LPT2, when you configure your printer, make sure you set the printer-driver port to LPT1.OS2 or LPT2.OS2. If the printer is physically connected to LPT3 or LPT4, you must create a line for LPT3.OS2 or LPT4.OS2 in the [ports] section of your WIN.INI file and then set the printer driver to the appropriate .OS2 port when you configure it. For more information about WIN.INI settings, see the on-line document called WININI.TXT. Running Applications that Require Expanded Memory ------------------------------------------------- If you have an 80386 system and use applications that require expanded memory, you can use EMM386.SYS, the expanded memory emulator that comes with Windows 3.0. Setting the D= Switch for EMM386 -------------------------------- If you install EMM386, before you can start Windows in 386 enhanced mode, you must include the following setting on your EMM386 command line: d=48 Running SMARTDrive with Disk Manager, SpeedStor or Vfeature Deluxe ------------------------------------------------------------------ SMARTDrive will not run if your hard disk was partitioned using one of the following utilities: * Disk Manager (Ontrack Computer Systems) * SpeedStor (Storage Dimensions) * Vfeature Deluxe (Golden Bow Systems) If your hard disk was partitioned using one of these utilities, SMARTDrive will not start. Instead, it displays the following message: Incompatible disk partition detected. SMARTDrive does this to protect your hard disk from possible damage. Hard disks partitioned using these three utilities are often incompatible with SMARTDrive; running SMARTDrive on such a hard disk could destroy the data on that disk. Additional query words: MMWIN kbmm 1.00 readme ====================================================================== Keywords : Technology : kbWinMultiXSearch kbWinMultiX100 Version : :1.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.