DOCUMENT:Q145765  17-DEC-2000  [win95x]
TITLE   :Cannot Undock with PCMCIA Card in Databook PCMCIA Controller
PRODUCT :Microsoft Windows 95.x Retail Product
PROD/VER:95
OPER/SYS:
KEYWORDS:win95

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows 95 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you try to undock a laptop computer with a PCMCIA card installed in a
Databook PCMCIA controller socket, you may receive the following error message:

   The computer failed to undock

RESOLUTION
==========

To work around this problem, remove all PCMCIA devices from their sockets before
undocking the computer. After doing so, the Eject command on the Start menu
works correctly.

STATUS
======

Microsoft is researching this problem and will post new information here in the
Microsoft Knowledge Base as it becomes available.


======================================================================
Keywords          : win95 
Technology        : kbWin95search kbZNotKeyword3
Version           : 95

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.