DOCUMENT:Q136900 18-DEC-2000 [win95x] TITLE :Manually Updating the Startup Disk After Installing MS Plus! PRODUCT :Microsoft Windows 95.x Retail Product PROD/VER:95 OPER/SYS: KEYWORDS:win95 ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows 95 - Microsoft Plus! for Windows 95 ------------------------------------------------------------------------------- SYMPTOMS ======== If you do not update your Windows 95 Startup disk (also known as the Emergency Boot Disk) either when you install Microsoft Plus! for Windows 95, or when you run DriveSpace 3, you may not be able to start your computer with the Startup disk. CAUSE ===== The Startup disk has not been updated for DriveSpace 3. Therefore, DriveSpace 3 compressed volume files (CVFs) cannot be mounted or repaired. RESOLUTION ========== If Windows 95 starts normally, you can create a new Startup disk with updated files by following these steps: 1. In Control Panel, double-click the Add/Remove Programs icon. 2. On the Startup Disk tab, click the Create Disk button. If you cannot start Windows 95 normally, you must replace the Scandisk.exe and Drvspace.bin files on the Startup disk with updated versions compatible with DriveSpace 3. To do so, follow the steps in the appropriate section below. Using the Microsoft Plus! CD-ROM -------------------------------- NOTE: If you cannot access the CD-ROM drive, the real-mode drivers for the CD-ROM drive are probably not being loaded in the Config.sys and Autoexec.bat files. You must load the appropriate drivers for the CD-ROM drive to function. For additional information, please see the following article in the Microsoft Knowledge Base: Q135174 Cannot Access CD-ROM Drive in MS-DOS Mode Or, if you have not started Windows 95, view the Config.dos and Autoexec.dos files with a text editor. If they exist, copy the lines for the CD-ROM driver and Mscdex.exe to the equivalent Config.sys and Autoexec.bat files. When you have finished updating the Startup disk, remove these lines from the Config.sys and Autoexec.bat files. To update the Startup disk, follow these steps: 1. Boot your computer to a command prompt, and then insert the Startup disk in drive A. NOTE: The instructions in this section assume that you are using floppy disk drive A for the Startup disk. If you are using a different drive, modify the instructions in this section accordingly. 2. Insert the Microsoft Plus! CD-ROM in the CD-ROM drive. 3. Type the following command, and then press ENTER " copy :\win95\*.* a: " (without the quotation marks) where is the drive letter for the CD-ROM drive. 4. Type "a:" (without the quotation marks), and then press ENTER. 5. Type the following commands. Press ENTER after each command: " ren scandisk.exe scandisk.w95 ren drvspace.bin drvspace.w95 ren scanplus.exe scandisk.exe ren drvplus.bin drvspace.bin " (without the quotation marks) 6. Restart your computer with the Startup disk in the drive. Using Microsoft Plus! Disks --------------------------- NOTE: The instructions in this section assume that you are using floppy disk drive A. If you are using a different drive, modify the instructions in this section accordingly. 1. Boot your computer to a command prompt. 2. Type the following command, and then press ENTER: " md c:\tempplus " (without the quotation marks) 3. Type the following command, and then press ENTER: " copy c:\windows\command\extract.exe c:\tempplus " (without the quotation marks) 4. Put disk 1 of the original Microsoft Plus! disks in drive A, type the following command, and then press ENTER: " c:\tempplus\extract a:\plus_1.cab drvplus.bin /l c:\tempplus " (without the quotation marks) 5. Replace disk 1 in the floppy disk drive with disk 2. 6. Type the following line, and then press ENTER: " c:\tempplus\extract a:\plus_2.cab scanplus.exe /l c:\tempplus " (without the quotation marks) 7. Place the Startup disk in drive A. 8. Type the following commands. Press ENTER after each command: " copy c:\tempplus\scanplus.exe a:\ copy c:\tempplus\drvplus.bin a:\ ren a:\scanplus.exe a:\scandisk.exe ren a:\drvplus.bin a:\drvspace.bin " (without the quotation marks) 9. Restart your computer with the Startup disk in the drive. ====================================================================== Keywords : win95 Technology : kbWin95search kbGamesSearch kbPlusSearch kbZNotKeyword3 kbPlus95 Version : 95 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.