DOCUMENT:Q178729  10-AUG-2001  [crossnet]
TITLE   :How To Configure Windows 95 to Dial into a RAS/RRAS Server
PRODUCT :Windows for Workgroups and Windows NT Networking Issues
PROD/VER:WinNT:4.0;Windows:95
OPER/SYS:
KEYWORDS:kbinterop kbnetwork win95

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server, Enterprise Edition version 4.0 
-------------------------------------------------------------------------------

SUMMARY
=======

This article discusses a step-by-step procedure that ensures Windows 95 TCP/IP
client platforms will successfully dial, get connected, and log on to a computer
running Windows NT Server version 4.0 Remote Access Service (RAS) or Routing and
Remote Access Service (RRAS). These steps also enable the Windows 95 Dial- Up
Networking (DUN) Client to successfully browse the network beyond the RAS or
RRAS Server.

MORE INFORMATION
================

NOTE: The following information assumes that RAS/RRAS has been installed and
configured to support Dial-up Clients using TCP/IP and allows access to the
entire network.

1. Upgrade your Windows 95 DUN client to the latest version, which can be found
   at the following location:

   http://www.microsoft.com/windows/downloads/default.asp

   NOTE: On this page, select Product or Feature as Windows 95, and select
   Category as Networking and Communications. Then, click Go.

2. If there is a network interface card (NIC) in your Windows 95 DUN Client,
   create a hardware profile that disables the NIC.

   For more information, see the following article in the Microsoft knowledge
   base:

   Q141600 How to Manually Create Hardware Profiles for Laptop Computers


   Q150053 Erratic Domain Logon from Windows 95 Dial-Up Networking

NOTE: Microsoft Windows 95 disables the hardware bus slot. If you have a
multi-function NIC/Modem, you will disable both functions. OSR2 has the
capability to disable the individual function of the card instead of the entire
bus.

If Windows 95 is loaded on a laptop with docking station, undocking will
accomplish the same result as a hardware profile. If the NIC is a PC Card,
simply remove the card from the PCMCIA slot.

3. Domain authentication and browsing only occur when the Windows 95 DUN Client
   can find the primary domain controller (PDC) for the Windows NT domain. The
   following two things must exist for this to occur:

   a. NetBIOS Name Resolution must be implemented. This is accomplished by
      either installing a Windows Internet Name Service (WINS) Server on the
      network or using an Lmhosts file to resolve the NetBIOS name of the PDC.
      This is used for both domain validation and obtaining a browse list.

   b. The Windows 95 workgroup name must be the same as the Windows NT domain
      name. This is defined in the Network Identification Tab in Network
      Neighborhood properties.

   For more information, see the following article in the Microsoft knowledge
   base:

   Q150800 Domain Browsing with TCP/IP and LMHOSTS Files

Dial-up connections are generally slow when you browse over a dial-up connection.
Depending on the location of the PDC and the size of the domain, it can take a
considerable amount of time to obtain a browse list from the PDC.

Additional query words:

======================================================================
Keywords          : kbinterop kbnetwork win95 
Technology        : kbWinNTsearch kbWinNT400search kbWinNTSsearch kbWinNTSEntSearch kbWinNTSEnt400 kbWinNTS400search
Version           : WinNT:4.0;Windows:95
Issue type        : kbprb

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.