Custom Setup Parameters for Windows NT

• Microsoft Windows NT operating system version 3.1
• Microsoft Windows NT Advanced Server version 3.1

The following information is displayed when typing "Setup/?" (without the quotes) from Command Prompt under Windows NT or Windows NT Advanced Server:

   Microsoft Setup

   SETUP [/?] [/f] [/i <INF Src File>]
         [/c <Script Section>] [/s <Src Path>]
         [/d <Dest Path>] [/t <Var> = <Value>]
         [/n] [/v]

   /? - generates this Usage message.
   /f - turns off blue background.
   /i - defaults to current directory + 'SETUP.INF'.
   /c - defaults to 'Shell Commands'.
   /s - defaults to Current Working Directory.
   /d - optional destination, mandatory on setup to share.
   /t - set INF <var> to <value>, multiple /T is valid.
   /n - setup to share mode
   /v - turn on INF syntax checking.

Of the above switches, the following are not supported, and should not be used: /F, /C, /T, and /V.

The System Guides for both Windows NT and Windows NT Advanced Server contain the following additional warning about Setup:

   IMPORTANT: Do not use the MS-DOS or OS/2 copy command, the MS-DOS XCOPY
   command, or the Copy command in File Manager to install Windows NT files
   on a network server. You must use the Windows NT setup command.

   If you install this way, the information on the Emergency Repair Disk
   may or may not be accurate in assessing and repairing system damage, and
   is therefore not supported.