Error Codes in Windows NT Part 1 of 2ID: Q155011
|
This article lists the error codes you may encounter in Windows NT. For the remaining error codes, please see the following article(s) in the Microsoft Knowledge Base:
ARTICLE-ID: Q155012
TITLE : Error Codes in Windows NT Part 2 of 2
Code Name Description
--------------------------------------------------------------------------
-8 LZERROR_UNKNOWNALG Compression algorithm not
recognized.
-7 LZERROR_BADVALUE Input parameter out of
acceptable range.
-6 LZERROR_GLOBLOCK Bad global handle.
-5 LZERROR_GLOBALLOC Insufficient memory for LZFile
structure.
-4 LZERROR_WRITE Out of space for output file.
-3 LZERROR_READ Corrupt compressed file
format.
-2 LZERROR_BADOUTHANDLE Invalid output handle.
-1 LZERROR_BADINHANDLE Invalid input handle.
0L NO_ERROR No error.
0L ERROR_SUCCESS The operation was successfully
completed.
1L ERROR_INVALID_FUNCTION The function is incorrect.
2L ERROR_FILE_NOT_FOUND The system cannot find the
file specified.
3L ERROR_PATH_NOT_FOUND The system cannot find the
specified path.
4L ERROR_TOO_MANY_OPEN_FILES The system cannot open the
file.
5L ERROR_ACCESS_DENIED Access is denied.
6L ERROR_INVALID_HANDLE The internal file identifier
is incorrect.
7L ERROR_ARENA_TRASHED The storage control blocks
were destroyed.
8L ERROR_NOT_ENOUGH_MEMORY Not enough storage is
available to process this
command.
9L ERROR_INVALID_BLOCK The storage control block
address is invalid.
10L ERROR_BAD_ENVIRONMENT The environment is incorrect.
11L ERROR_BAD_FORMAT An attempt was made to load a
program with an incorrect
format.
12L ERROR_INVALID_ACCESS The access code is invalid.
13L ERROR_INVALID_DATA The data is invalid.
14L ERROR_OUTOFMEMORY Not enough storage is
available to complete this
operation.
15L ERROR_INVALID_DRIVE The system cannot find the
specified drive.
16L ERROR_CURRENT_DIRECTORY The directory cannot be
removed.
17L ERROR_NOT_SAME_DEVICE The system cannot move the
file to a different disk
drive.
18L ERROR_NO_MORE_FILES There are no more files.
19L ERROR_WRITE_PROTECT The media is write protected.
20L ERROR_BAD_UNIT The system cannot find the
specified device.
21L ERROR_NOT_READY The drive is not ready.
22L ERROR_BAD_COMMAND The device does not recognize
the command.
23L ERROR_CRC Data error (cyclic redundancy
check).
24L ERROR_BAD_LENGTH The program issued a command
but the command length is
incorrect.
25L ERROR_SEEK The drive cannot locate a
specific area or track on the
disk.
26L ERROR_NOT_DOS_DISK The specified disk cannot be
accessed.
27L ERROR_SECTOR_NOT_FOUND The drive cannot find the
requested sector.
28L ERROR_OUT_OF_PAPER The printer is out of paper.
29L ERROR_WRITE_FAULT The system cannot write to the
specified device.
30L ERROR_READ_FAULT The system cannot read from
the specified device.
31L ERROR_GEN_FAILURE A device attached to the
system is not functioning.
32L ERROR_SHARING_VIOLATION The process cannot access the
file because it is being used
by another process.
33L ERROR_LOCK_VIOLATION The process cannot access the
file because another process
has locked a portion of the
file.
34L ERROR_WRONG_DISK The wrong disk is in the
drive. Insert %2 (Volume
Serial Number: %3) into drive
%1.
36L ERROR_SHARING_BUFFER_EXCEEDED Too many files opened for
sharing.
38L ERROR_HANDLE_EOF Reached End Of File.
39L ERROR_HANDLE_DISK_FULL The disk is full.
50L ERROR_NOT_SUPPORTED The network request is not
supported.
51L ERROR_REM_NOT_LIST The remote computer is not
available.
52L ERROR_DUP_NAME A duplicate name exists on the
network.
53L ERROR_BAD_NETPATH The network path was not
found.
54L ERROR_NETWORK_BUSY The network is busy.
55L ERROR_DEV_NOT_EXIST The specified network resource
is no longer available.
56L ERROR_TOO_MANY_CMDS The network BIOS command limit
has been reached.
57L ERROR_ADAP_HDW_ERR A network adapter hardware
error occurred.
58L ERROR_BAD_NET_RESP The specified server cannot
perform the requested
operation.
59L ERROR_UNEXP_NET_ERR An unexpected network error
occurred.
60L ERROR_BAD_REM_ADAP The remote adapter is not
compatible.
61L ERROR_PRINTQ_FULL The printer queue is full.
62L ERROR_NO_SPOOL_SPACE Space to store the file
waiting to be printed is not
available on the server.
63L ERROR_PRINT_CANCELLED File waiting to be printed was
deleted.
64L ERROR_NETNAME_DELETED The specified network name is
no longer available.
65L ERROR_NETWORK_ACCESS_DENIED Network access is denied.
66L ERROR_BAD_DEV_TYPE The network resource type is
incorrect.
67L ERROR_BAD_NET_NAME The network name cannot be
found.
68L ERROR_TOO_MANY_NAMES The name limit for the local
computer network adapter card
exceeded.
69L ERROR_TOO_MANY_SESS The network BIOS session limit
exceeded.
70L ERROR_SHARING_PAUSED The remote server is paused or
is in the process of being
started.
71L ERROR_REQ_NOT_ACCEP The network request was not
accepted.
72L ERROR_REDIR_PAUSED The specified printer or disk
device has been paused.
80L ERROR_FILE_EXISTS The file exists.
82L ERROR_CANNOT_MAKE The directory or file cannot
be created.
83L ERROR_FAIL_I24 Fail on INT 24.
84L ERROR_OUT_OF_STRUCTURES Storage to process this
request is not available.
85L ERROR_ALREADY_ASSIGNED The local device name is
already in use.
86L ERROR_INVALID_PASSWORD The specified network password
is incorrect.
87L ERROR_INVALID_PARAMETER The parameter is incorrect.
88L ERROR_NET_WRITE_FAULT A write fault occurred on the
network.
89L ERROR_NO_PROC_SLOTS The system cannot start
another process at this time.
100L ERROR_TOO_MANY_SEMAPHORES Cannot create another system
semaphore.
101L ERROR_EXCL_SEM_ALREADY_OWNED The exclusive semaphore is
owned by another process.
102L ERROR_SEM_IS_SET The semaphore is set and
cannot be closed.
103L ERROR_TOO_MANY_SEM_REQUESTS The semaphore cannot be set
again.
104L ERROR_INVALID_AT_INTERRUPT_TIME Cannot request exclusive
semaphores at interrupt time.
105L ERROR_SEM_OWNER_DIED The previous ownership of this
semaphore has ended.
106L ERROR_SEM_USER_LIMIT Insert the disk for drive 1.
107L ERROR_DISK_CHANGE Program stopped because
alternate disk was not
inserted.
108L ERROR_DRIVE_LOCKED The disk is in use or locked
by another process.
109L ERROR_BROKEN_PIPE The pipe was ended.
110L ERROR_OPEN_FAILED The system cannot open the
specified device or file.
111L ERROR_BUFFER_OVERFLOW The file name is too long.
112L ERROR_DISK_FULL There is not enough space on
the disk.
113L ERROR_NO_MORE_SEARCH_HANDLES No more internal file
identifiers available.
114L ERROR_INVALID_TARGET_HANDLE The target internal file
identifier is incorrect.
117L ERROR_INVALID_CATEGORY The IOCTL call made by the
application program is
incorrect.
118L ERROR_INVALID_VERIFY_SWITCH The verify-on-write switch
parameter value is incorrect.
119L ERROR_BAD_DRIVER_LEVEL The system does not support
the requested command.
120L ERROR_CALL_NOT_IMPLEMENTED The Application Program
Interface (API) entered will
only work in Windows/NT mode.
121L ERROR_SEM_TIMEOUT The semaphore timeout period
has expired.
122L ERROR_INSUFFICIENT_BUFFER The data area passed to a
system call is too small.
123L ERROR_INVALID_NAME The file name, directory name,
or volume label is
syntactically incorrect.
124L ERROR_INVALID_LEVEL The system call level is
incorrect.
125L ERROR_NO_VOLUME_LABEL The disk has no volume label.
126L ERROR_MOD_NOT_FOUND The specified module cannot be
found.
127L ERROR_PROC_NOT_FOUND The specified procedure could
not be found.
128L ERROR_WAIT_NO_CHILDREN There are no child processes
to wait for.
129L ERROR_CHILD_NOT_COMPLETE The %1 application cannot be
run in Windows mode.
130L ERROR_DIRECT_ACCESS_HANDLE Attempt to use a file handle
to an open disk partition for
an operation other than raw
disk I/O.
131L ERROR_NEGATIVE_SEEK An attempt was made to move
the file pointer before the
beginning of the file.
132L ERROR_SEEK_ON_DEVICE The file pointer cannot be set
on the specified device or
file.
133L ERROR_IS_JOIN_TARGET A JOIN or SUBST command cannot
be used for a drive that
contains previously joined
drives.
134L ERROR_IS_JOINED An attempt was made to use a
JOIN or SUBST command on a
drive that is already joined.
135L ERROR_IS_SUBSTED An attempt was made to use a
JOIN or SUBST command on a
drive already substituted.
136L ERROR_NOT_JOINED The system attempted to delete
the JOIN of a drive not
previously joined.
137L ERROR_NOT_SUBSTED The system attempted to delete
the substitution of a drive
not previously substituted.
138L ERROR_JOIN_TO_JOIN The system tried to join a
drive to a directory on a
joined drive.
139L ERROR_SUBST_TO_SUBST The system attempted to
substitute a drive to a
directory on a substituted
drive.
140L ERROR_JOIN_TO_SUBST The system tried to join a
drive to a directory on a
substituted drive.
141L ERROR_SUBST_TO_JOIN The system attempted to SUBST
a drive to a directory on a
joined drive.
142L ERROR_BUSY_DRIVE The system cannot perform a
JOIN or SUBST at this time.
143L ERROR_SAME_DRIVE The system cannot join or
substitute a drive to or for a
directory on the same drive.
144L ERROR_DIR_NOT_ROOT The directory is not a
subdirectory of the root
directory.
145L ERROR_DIR_NOT_EMPTY The directory is not empty.
146L ERROR_IS_SUBST_PATH The path specified is being
used in a substitute.
147L ERROR_IS_JOIN_PATH Not enough resources are
available to process this
command.
148L ERROR_PATH_BUSY The specified path cannot be
used at this time.
149L ERROR_IS_SUBST_TARGET An attempt was made to join or
substitute a drive for which a
directory on the drive is the
target of a previous
substitute.
150L ERROR_SYSTEM_TRACE System trace information not
specified in your CONFIG.SYS
file, or tracing is not
allowed.
151L ERROR_INVALID_EVENT_COUNT The number of specified
semaphore events is incorrect.
152L ERROR_TOO_MANY_MUXWAITERS Too many semaphores are
already set.
153L ERROR_INVALID_LIST_FORMAT The list is not correct.
154L ERROR_LABEL_TOO_LONG The volume label entered
exceeds the 11 character
limit. The first 11 characters
were written to disk. Any
characters that exceeded the
11 character limit were
automatically deleted.
155L ERROR_TOO_MANY_TCBS Cannot create another thread.
156L ERROR_SIGNAL_REFUSED The recipient process has
refused the signal.
157L ERROR_DISCARDED The segment is already
discarded and cannot be
locked.
158L ERROR_NOT_LOCKED The segment is already
unlocked.
159L ERROR_BAD_THREADID_ADDR The address for the thread ID
is incorrect.
160L ERROR_BAD_ARGUMENTS The argument string passed to
DosExecPgm is incorrect.
161L ERROR_BAD_PATHNAME The specified path name is
invalid.
162L ERROR_SIGNAL_PENDING A signal is already pending.
164L ERROR_MAX_THRDS_REACHED No more threads can be created
in the system.
167L ERROR_LOCK_FAILED Attempt to lock a region of a
file failed.
170L ERROR_BUSY The requested resource is in
use.
173L ERROR_CANCEL_VIOLATION A lock request was not
outstanding for the supplied
cancel region.
174L ERROR_ATOMIC_LOCKS_NOT_SUPPORTED The file system does not
support atomic changing of the
lock type.
180L ERROR_INVALID_SEGMENT_NUMBER The system detected a segment
number that is incorrect.
182L ERROR_INVALID_ORDINAL The operating system cannot
run %1.
183L ERROR_ALREADY_EXISTS Attempt to create file that
already exists.
186L ERROR_INVALID_FLAG_NUMBER The flag passed is incorrect.
187L ERROR_SEM_NOT_FOUND The specified system semaphore
name was not found.
188L ERROR_INVALID_STARTING_CODESEG The operating system cannot
run %1.
189L ERROR_INVALID_STACKSEG The operating system cannot
run %1.
190L ERROR_INVALID_MODULETYPE The operating system cannot
run %1.
191L ERROR_INVALID_EXE_SIGNATURE %1 cannot be run in Windows/NT
mode.
192L ERROR_EXE_MARKED_INVALID The operating system cannot
run %1.
193L ERROR_BAD_EXE_FORMAT %1 is not a valid Windows-
based application.
194L ERROR_ITERATED_DATA_EXCEEDS_64k The operating system cannot
run %1.
195L ERROR_INVALID_MINALLOCSIZE The operating system cannot
run %1.
196L ERROR_DYNLINK_FROM_INVALID_RING The operating system cannot
run this application program.
197L ERROR_IOPL_NOT_ENABLED The operating system is not
presently configured to run
this application.
198L ERROR_INVALID_SEGDPL The operating system cannot
run %1.
199L ERROR_AUTODATASEG_EXCEEDS_64k The operating system cannot
run this application program.
200L ERROR_RING2SEG_MUST_BE_MOVABLE The code segment cannot be
greater than or equal to 64KB.
201L ERROR_RELOC_CHAIN_XEEDS_SEGLIM The operating system cannot
run %1.
202L ERROR_INFLOOP_IN_RELOC_CHAIN The operating system cannot
run %1.
203L ERROR_ENVVAR_NOT_FOUND The system could not find the
environment option entered.
205L ERROR_NO_SIGNAL_SENT No process in the command
subtree has a signal handler.
206L ERROR_FILENAME_EXCED_RANGE The file name or extension is
too long.
207L ERROR_RING2_STACK_IN_USE The ring 2 stack is in use.
208L ERROR_META_EXPANSION_TOO_LONG The global filename characters
* or ? are entered
incorrectly, or too many
global filename characters are
specified.
209L ERROR_INVALID_SIGNAL_NUMBER The signal being posted is
incorrect.
210L ERROR_THREAD_1_INACTIVE The signal handler cannot be
set.
212L ERROR_LOCKED The segment is locked and
cannot be reallocated.
214L ERROR_TOO_MANY_MODULES Too many dynamic link modules
are attached to this program
or dynamic link module.
215L ERROR_NESTING_NOT_ALLOWED Can't nest calls to
LoadModule.
230L ERROR_BAD_PIPE The pipe state is invalid.
231L ERROR_PIPE_BUSY All pipe instances busy.
232L ERROR_NO_DATA Pipe close in progress.
233L ERROR_PIPE_NOT_CONNECTED No process on other end of
pipe.
234L ERROR_MORE_DATA More data is available.
240L ERROR_VC_DISCONNECTED The session was canceled.
254L ERROR_INVALID_EA_NAME The specified EA name is
invalid.
255L ERROR_EA_LIST_INCONSISTENT The EAs are inconsistent.
259L ERROR_NO_MORE_ITEMS No more data is available.
266L ERROR_CANNOT_COPY The Copy API cannot be used.
267L ERROR_DIRECTORY The directory name is invalid.
275L ERROR_EAS_DIDNT_FIT The EAs did not fit in the
buffer.
276L ERROR_EA_FILE_CORRUPT The EA file on the mounted
file system is damaged.
277L ERROR_EA_TABLE_FULL The EA table in the EA file on
the mounted file system is
full.
278L ERROR_INVALID_EA_HANDLE The specified EA handle is
invalid.
282L ERROR_EAS_NOT_SUPPORTED The mounted file system does
not support extended
attributes.
288L ERROR_NOT_OWNER Attempt to release mutex not
owned by caller.
298L ERROR_TOO_MANY_POSTS Too many posts made to a
semaphore.
299L ERROR_PARTIAL_COPY Only part of a
Read/WriteProcessMemory
request was completed.
317L ERROR_MR_MID_NOT_FOUND The system cannot find message
for message number 0x%1 in
message file for %2.
487L ERROR_INVALID_ADDRESS Attempt to access invalid
address.
534L ERROR_ARITHMETIC_OVERFLOW Arithmetic result exceeded 32-
bits.
535L ERROR_PIPE_CONNECTED There is a process on other
end of the pipe.
536L ERROR_PIPE_LISTENING Waiting for a process to open
the other end of the pipe.
994L ERROR_EA_ACCESS_DENIED Access to the EA is denied.
995L ERROR_OPERATION_ABORTED The I/O operation was aborted
due to either thread exit or
application request.
996L ERROR_IO_INCOMPLETE Overlapped IO event not in
signaled state.
997L ERROR_IO_PENDING Overlapped IO operation in
progress.
998L ERROR_NOACCESS Invalid access to memory
location.
999L ERROR_SWAPERROR Error accessing paging file.
1001L ERROR_STACK_OVERFLOW Recursion too deep, stack
overflowed.
1002L ERROR_INVALID_MESSAGE Window can't handle sent
message.
1003L ERROR_CAN_NOT_COMPLETE Cannot complete function for
some reason.
1004L ERROR_INVALID_FLAGS The flags are invalid.
1005L ERROR_UNRECOGNIZED_VOLUME The volume does not contain a
recognized file system. Make
sure that all required file
system drivers are loaded and
the volume is not damaged.
1006L ERROR_FILE_INVALID The volume for a file was
externally altered and the
opened file is no longer
valid.
1007L ERROR_FULLSCREEN_MODE The requested operation cannot
be performed in full-screen
mode.
1008L ERROR_NO_TOKEN An attempt was made to
reference a token that does
not exist.
1009L ERROR_BADDB The configuration registry
database is damaged.
1010L ERROR_BADKEY The configuration registry key
is invalid.
1011L ERROR_CANTOPEN The configuration registry key
cannot be opened.
1012L ERROR_CANTREAD The configuration registry key
cannot be read.
1013L ERROR_CANTWRITE The configuration registry key
cannot be written.
1014L ERROR_REGISTRY_RECOVERED One of the files containing
the system's registry data had
to be recovered by use of a
log or alternate copy. The
recovery succeeded.
1015L ERROR_REGISTRY_CORRUPT The registry is damaged. The
structure of one of the files
that contains registry data is
damaged, or the system's in
memory image of the file is
damaged, or the file could not
be recovered because its
alternate copy or log was
absent or damaged.
1016L ERROR_REGISTRY_IO_FAILED The registry initiated an I/O
operation that had an
unrecoverable failure. The
registry could not read in, or
write out, or flush, one of
the files that contain the
system's image of the
registry.
1017L ERROR_NOT_REGISTRY_FILE The system attempted to load
or restore a file into the
registry, and the specified
file is not in the format of a
registry file.
1018L ERROR_KEY_DELETED Illegal operation attempted on
a registry key that has been
marked for deletion.
1019L ERROR_NO_LOG_SPACE System could not allocate
required space in a registry
log.
1020L ERROR_KEY_HAS_CHILDREN An attempt was made to create
a symbolic link in a registry
key that already has subkeys
or values.
1021L ERROR_CHILD_MUST_BE_VOLATILE An attempt was made to create
a stable subkey under a
volatile parent key.
1022L ERROR_NOTIFY_ENUM_DIR This indicates that a notify
change request is being
completed and the information
is not being returned in the
caller's buffer. The caller
now needs to enumerate the
files to find the changes.
1051L ERROR_DEPENDENT_SERVICES_RUNNING A stop control has been sent
to a service which other
running services are dependent
on.
1052L ERROR_INVALID_SERVICE_CONTROL The requested control is not
valid for this service.
1053L ERROR_SERVICE_REQUEST_TIMEOUT The service did not respond to
the start or control request
in a timely fashion.
1054L ERROR_SERVICE_NO_THREAD A thread could not be created
for the service.
1055L ERROR_SERVICE_DATABASE_LOCKED The service database is
locked.
1056L ERROR_SERVICE_ALREADY_RUNNING An instance of the service is
already running.
1057L ERROR_INVALID_SERVICE_ACCOUNT The account name is invalid or
does not exist.
1058L ERROR_SERVICE_DISABLED The specified service is
disabled and cannot be
started.
1059L ERROR_CIRCULAR_DEPENDENCY Circular service dependency
was specified.
1060L ERROR_SERVICE_DOES_NOT_EXIST The specified service does not
exist as an installed service.
1061L ERROR_SERVICE_CANNOT_ACCEPT_CTRL The service cannot accept
control messages at this time.
1062L ERROR_SERVICE_NOT_ACTIVE The service has not been
started.
1063L ERROR_FAILED_SERVICE_CONTROLLER_CONNECT The service process could
not connect to the service
controller.
1064L ERROR_EXCEPTION_IN_SERVICE An exception occurred in the
service when handling the
control request.
1065L ERROR_DATABASE_DOES_NOT_EXIST The database specified does
not exist.
1066L ERROR_SERVICE_SPECIFIC_ERROR The service has returned a
service-specific error code.
1067L ERROR_PROCESS_ABORTED The process terminated
unexpectedly.
1068L ERROR_SERVICE_DEPENDENCY_FAIL The dependency service or
group failed to start.
1069L ERROR_SERVICE_LOGON_FAILED The service did not start due
to a logon failure.
1070L ERROR_SERVICE_START_HANG After starting, the service
hung in a start-pending state.
1071L ERROR_INVALID_SERVICE_LOCK The specified service database
lock is invalid.
1072L ERROR_SERVICE_MARKED_FOR_DELETE The specified service has been
marked for deletion.
1073L ERROR_SERVICE_EXISTS The specified service already
exists.
1074L ERROR_ALREADY_RUNNING_LKG The system is currently
running with the last-known-
good configuration.
1075L ERROR_SERVICE_DEPENDENCY_DELETED The dependency service does
not exist or has been marked
for deletion.
1076L ERROR_BOOT_ALREADY_ACCEPTED The current boot has already
been accepted for use as the
last-known-good control set.
1077L ERROR_SERVICE_NEVER_STARTED No attempts to start the
service have been made since
the last boot.
1078L ERROR_DUPLICATE_SERVICE_NAME The name is already in use as
either a service name or a
service display name.
1079L ERROR_DIFFERENT_SERVICE_ACCOUNT The account specified for this
service is different from the
account specified for other
services running in the same
process.
1100L ERROR_END_OF_MEDIA The physical end of the tape
has been reached.
1101L ERROR_FILEMARK_DETECTED A tape access reached a
filemark.
1102L ERROR_BEGINNING_OF_MEDIA The beginning of the tape or
partition was encountered.
1103L ERROR_SETMARK_DETECTED A tape access reached a
setmark.
1104L ERROR_NO_DATA_DETECTED During a tape access, the end
of the data marker was
reached.
1105L ERROR_PARTITION_FAILURE Tape could not be partitioned.
1106L ERROR_INVALID_BLOCK_LENGTH When accessing a new tape of a
multivolume partition, the
current block size is
incorrect.
1107L ERROR_DEVICE_NOT_PARTITIONED Tape partition information
could not be found when
loading a tape.
1108L ERROR_UNABLE_TO_LOCK_MEDIA Attempt to lock the eject
media mechanism failed.
1109L ERROR_UNABLE_TO_UNLOAD_MEDIA Unload media failed.
1110L ERROR_MEDIA_CHANGED Media in drive may have
changed.
1111L ERROR_BUS_RESET The I/O bus was reset.
1112L ERROR_NO_MEDIA_IN_DRIVE Tape query failed because of
no media in drive.
1113L ERROR_NO_UNICODE_TRANSLATION No mapping for the Unicode
character exists in the target
multi-byte code page.
1114L ERROR_DLL_INIT_FAILED A DLL initialization routine
failed.
1115L ERROR_SHUTDOWN_IN_PROGRESS A system shutdown is in
progress.
1116L ERROR_NO_SHUTDOWN_IN_PROGRESS An attempt to abort the
shutdown of the system failed
because no shutdown was in
progress.
1117L ERROR_IO_DEVICE The request could not be
performed because of an I/O
device error.
1118L ERROR_SERIAL_NO_DEVICE No serial device was
successfully initialized. The
serial driver will unload.
1119L ERROR_IRQ_BUSY Unable to open a device that
was sharing an interrupt
request (IRQ) with other
devices. At least one other
device that uses that IRQ was
already opened.
1120L ERROR_MORE_WRITES A serial I/O operation was
completed by another write to
the serial port. (The
IOCTL_SERIAL_XOFF_COUNTER
reached zero.)
1121L ERROR_COUNTER_TIMEOUT A serial I/O operation
completed because the time-out
period expired. (The
IOCTL_SERIAL_XOFF_COUNTER did
not reach zero.)
1122L ERROR_FLOPPY_ID_MARK_NOT_FOUND No ID address mark was found
on the floppy disk.
1123L ERROR_FLOPPY_WRONG_CYLINDER Mismatch between the floppy
disk sector ID field and the
floppy disk controller track
address.
1124L ERROR_FLOPPY_UNKNOWN_ERROR The floppy disk controller
reported an error that is not
recognized by the floppy disk
driver.
1125L ERROR_FLOPPY_BAD_REGISTERS The floppy disk controller
returned inconsistent results
in its registers.
1126L ERROR_DISK_RECALIBRATE_FAILED While accessing the hard disk,
a recalibrate operation
failed, even after retries.
1127L ERROR_DISK_OPERATION_FAILED While accessing the hard disk,
a disk operation failed even
after retries.
1128L ERROR_DISK_RESET_FAILED While accessing the hard disk,
a disk controller reset was
needed, but even that failed.
1129L ERROR_EOM_OVERFLOW Physical end of tape
encountered.
1130L ERROR_NOT_ENOUGH_SERVER_MEMORY Not enough server storage is
available to process this
command.
1131L ERROR_POSSIBLE_DEADLOCK A potential deadlock condition
has been detected.
1132L ERROR_MAPPED_ALIGNMENT The base address or the file
offset specified does not have
the proper alignment.
1140L ERROR_SET_POWER_STATE_VETOED An attempt to change the
system power state was vetoed
by another application or
driver.
1141L ERROR_SET_POWER_STATE_FAILED The system BIOS failed an
attempt to change the system
power state.
1142L ERROR_TOO_MANY_LINKS An attempt was made to create
more links on a file than the
file system supports.
1150L ERROR_OLD_WIN_VERSION The specified program requires
a newer version of Windows.
1151L ERROR_APP_WRONG_OS The specified program is not a
Windows or MS-DOS program.
1152L ERROR_SINGLE_INSTANCE_APP Cannot start more than one
instance of the specified
program.
1153L ERROR_RMODE_APP The specified program was
written for an older version
of Windows.
1154L ERROR_INVALID_DLL One of the library files
needed to run this application
is damaged.
1155L ERROR_NO_ASSOCIATION No application is associated
with the specified file for
this operation.
1156L ERROR_DDE_FAIL An error occurred in sending
the command to the
application.
1157L ERROR_DLL_NOT_FOUND One of the library files
needed to run this application
cannot be found.
1200L ERROR_BAD_DEVICE The specified device name is
invalid.
1201L ERROR_CONNECTION_UNAVAIL The device is not currently
connected but is a remembered
connection.
1202L ERROR_DEVICE_ALREADY_REMEMBERED An attempt was made to
remember a device that was
previously remembered.
1203L ERROR_NO_NET_OR_BAD_PATH No network provider accepted
the given network path.
1204L ERROR_BAD_PROVIDER The specified network provider
name is invalid.
1205L ERROR_CANNOT_OPEN_PROFILE Unable to open the network
connection profile.
1206L ERROR_BAD_PROFILE The network connection profile
is damaged.
1207L ERROR_NOT_CONTAINER Cannot enumerate a non-
container.
1208L ERROR_EXTENDED_ERROR An extended error has
occurred.
1209L ERROR_INVALID_GROUPNAME The format of the specified
group name is invalid.
1210L ERROR_INVALID_COMPUTERNAME The format of the specified
computer name is invalid.
1211L ERROR_INVALID_EVENTNAME The format of the specified
event name is invalid.
1212L ERROR_INVALID_DOMAINNAME The format of the specified
domain name is invalid.
1213L ERROR_INVALID_SERVICENAME The format of the specified
service name is invalid.
1214L ERROR_INVALID_NETNAME The format of the specified
network name is invalid.
1215L ERROR_INVALID_SHARENAME The format of the specified
share name is invalid.
1216L ERROR_INVALID_PASSWORDNAME The format of the specified
password is invalid.
1217L ERROR_INVALID_MESSAGENAME The format of the specified
message name is invalid.
1218L ERROR_INVALID_MESSAGEDEST The format of the specified
message destination is
invalid.
1219L ERROR_SESSION_CREDENTIAL_CONFLICT The credentials supplied
conflict with an existing set
of credentials.
1220L ERROR_REMOTE_SESSION_LIMIT_EXCEEDED An attempt was made to
establish a session to a LAN
Manager server, but there are
already too many sessions
established to that server.
1221L ERROR_DUP_DOMAINNAME The workgroup or domain name
is already in use by another
computer on the network.
1222L ERROR_NO_NETWORK The network is not present or
not started.
1223L ERROR_CANCELLED The operation was cancelled by
the user.
1224L ERROR_USER_MAPPED_FILE The requested operation cannot
be performed on a file with a
user mapped section open.
1225L ERROR_CONNECTION_REFUSED The remote system refused the
network connection.
1226L ERROR_GRACEFUL_DISCONNECT The network connection was
gracefully closed.
1227L ERROR_ADDRESS_ALREADY_ASSOCIATED The network transport endpoint
already has an address
associated with it.
1228L ERROR_ADDRESS_NOT_ASSOCIATED An address has not yet been
associated with the network
endpoint.
1229L ERROR_CONNECTION_INVALID An operation was attempted on
a non-existent network
connection.
1230L ERROR_CONNECTION_ACTIVE An invalid operation was
attempted on an active network
connection.
1231L ERROR_NETWORK_UNREACHABLE The remote network is not
reachable by the transport.
1232L ERROR_HOST_UNREACHABLE The remote system is not
reachable by the transport.
1233L ERROR_PROTOCOL_UNREACHABLE The remote system does not
support the transport
protocol.
1234L ERROR_PORT_UNREACHABLE No service is operating at the
destination network endpoint
on the remote system.
1235L ERROR_REQUEST_ABORTED The request was aborted.
1236L ERROR_CONNECTION_ABORTED The network connection was
aborted by the local system.
1237L ERROR_RETRY The operation could not be
completed. A retry should be
performed.
1238L ERROR_CONNECTION_COUNT_LIMIT A connection to the server
could not be made because the
limit on the number of
concurrent connections for
this account has been reached.
1239L ERROR_LOGIN_TIME_RESTRICTION Attempting to login during an
unauthorized time of day for
this account.
1240L ERROR_LOGIN_WKSTA_RESTRICTION The account is not authorized
to login from this station.
1241L ERROR_INCORRECT_ADDRESS The network address could not
be used for the operation
requested.
1242L ERROR_ALREADY_REGISTERED The service is already
registered.
1243L ERROR_SERVICE_NOT_FOUND The specified service does not
exist.
1244L ERROR_NOT_AUTHENTICATED The operation being requested
was not performed because the
user has not been
authenticated.
1245L ERROR_NOT_LOGGED_ON The operation being requested
was not performed because the
user has not logged on to the
network.
1246L ERROR_CONTINUE Return that wants caller to
continue with work in
progress.
1247L ERROR_ALREADY_INITIALIZED An attempt was made to perform
an initialization operation
when initialization has
already been completed.
1248L ERROR_NO_MORE_DEVICES No more local devices. Additional query words: prodnt sysdiff.exe unattended setup
Keywords : kberrmsg NTSrvWkst
Version : 4.0
Platform : winnt
Issue type : Last Reviewed: January 16, 1999