DOCUMENT:Q128532  08-AUG-2001  [winnt]
TITLE   :FPNW: The Bindery Library Could Not Access the PDC for Write
PRODUCT :Microsoft Windows NT
PROD/VER::3.51
OPER/SYS:
KEYWORDS:kbnetwork

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server version 3.51 
 - Microsoft File and Print Services for NetWare version 3.51 
-------------------------------------------------------------------------------

SYMPTOMS
========

After you promote different backup domain controllers (BDCs) to the role of
primary domain controller (PDC) several times, the File and Print Services for
NetWare (FPNW) server is not able to access the PDC and one or more of the
following symptoms occur:

 - The following message appears in the system log:

   Event ID #2625 - (EVENT_BINDLIB_PDC_SERVER_IS_DOWN)
   Description: The BINDERY library could not access the PDC for write.

 - JetAdmin and PConsole can set up a PServer but JetAdmin and PConsole do not
   successfully set a password. This leads to an invalid password response from
   the server.

 - When you attempt to manipulate PServers, the following error messages appear
   in Server Manager:

   - Invalid File Name

   - File Not Found

NOTE: JetDirect is no longer supported by HP. SDI (Simple Device Installation) is
now used to install network printers. For more information on this, see:

   http://www.hp.com/cgi-bin/cposupport /ccsearch/getdoc?doc=bpj05973

   or

   http://www.hp.com/cposupport/network ing/support_doc/bpj06765.html

HP recommends a new software admin package (TCP/IP / IPX/SPX based). For further
information see:

   http://www.hp.com/cgi-bin/cposupport /ccsearch/getdoc?doc=bpj06723

   or

   http://www.hp.com/cgi-bin/cposupport/ccsearch/getdoc? doc=bpj06724

CAUSE
=====

FPNW does not attempt to get the new PDC location. It fails the call and
postpones obtaining a new PDC location until the next call. Consequently, the
write handle on the PDC is lost.

WORKAROUND
==========

To work around this problem, stop and restart FPNW service in Control Panel
Services.

STATUS
======

Microsoft has confirmed this to be a problem in File and Print Services for A
supported fix is now available, but is not fully regression-tested and should be
applied only to systems experiencing this specific problem. Unless you are
severely impacted by this specific problem, Microsoft recommends that you wait
for the service pack release containing this fix. Contact Microsoft Product
Support Services for more information. Microsoft does not recommend implementing
this fix at this time. Contact Microsoft Product Support Services for more
information on the availability of this fix.


Additional query words: prodnt novell build fpnw 192

======================================================================
Keywords          : kbnetwork 
Technology        : kbWinNTsearch kbWinNT351search kbWinNTSsearch kbWinNTS351 kbWinNTS351search kbServicesNetwareSearch kbFPNW351
Version           : :3.51

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.