Hewlett-Packard 27247B Network Card Driver Fails to LoadLast reviewed: May 16, 1997Article ID: Q117752 |
The information in this article applies to:
SYMPTOMSAfter you install the network adapter driver for Hewlett-Packard (HP) 27247B, the following error appears in the Event Viewer:
Event ID: 7000 Source: Service Control Manager Type: Error Description: The HP272xx PC Lan Driver Service failed to start due to the following error: A device attached to the system is not functioning. CAUSEThis problem occurs because the HP 27247B driver does not initialize the BusNumber Registry value to zero.
RESOLUTIONTo change the BusNumber registry value for the HP 27247B, do the following: WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Hpisa0x \Parameters NOTE: The "x" (without quotes) value for the Hpisa0x subkey represents the number of HP 27247B network cards installed on the system.
|
Additional query words: prodnt mac nic
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |