DOCUMENT:Q145594  08-AUG-2001  [winnt]
TITLE   :How to Use the FPNWAUTH.EXE Utility
PRODUCT :Microsoft Windows NT
PROD/VER:winnt:3.51
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server version 3.51 
 - Microsoft File and Print Services for NetWare version 3.51 
-------------------------------------------------------------------------------

SUMMARY
=======

In a master domain model, if the File and Print Services for NetWare (FPNW)
server is installed in a Resource domain and the user accounts reside in the
Accounts domain, you can use the FPNWAUTH.EXE utility to enable the domain
controllers in the Accounts domain to authenticate logon attempts by FPNW users
from NetWare client computers.

You may download the FPNWAUTH.EXE utility from one of the following services:

 - CompuServe

   1. GO WINNT

   2. Go to the FPNW/DSMN download area

   3. Display results and download

 - Internet (anonymous FTP)

   1. ftp ftp.microsoft.com

   2. Go to the following location:

   /bussys/winnt/fpnw-unsup-ed/utilities/fpnwauth


MORE INFORMATION
================

FPNWAUTH.EXE is a command line utility you can use to enable or disable FPNW
client authentication on a domain controller. This utility enables a domain
controller on which the FPNW Admin Tools Only have been installed to
authenticate logon attempts by FPNW users from NetWare client computers. By
using FPNWAUTH.EXE, you do not need to purchase and install the full FPNW
product on every domain controller that may authenticate FPNW users.

NOTE: FPNWAUTH.EXE should NOT be run on an NT 4.0 Server.


If you want to enable the domain controller to authenticate FPNW users, type the
following at the command line:

" FPNWAUTH " (without the quotation marks)

If you want to disable the domain controller from authenticating FPNW users, type
the following at the command line:

" FPNWAUTH /D " (without the quotation marks)

If you want all domain controllers in a domain to authenticate FPNW users:

1. Install the full File and Print Services for NetWare product on at least one
   domain controller in the domain (This can be, but does not have to be, the
   primary domain controller).

2. On all domain controllers that do not have full File and Print Services for
   NetWare:

   a. Install the FPNW Admin Tools (using the Add Software button in Control
      Panel Network).

   b. Run FPNWAUTH.EXE to enable FPNW authentication.

   c. Reboot the computer.

Once you have completed the steps above for all domain controllers in the domain,
the domain correctly authenticates FPNW user logon requests passed through from
trusting domains and standalone servers in this domain.

Additional query words: prodnt novell

======================================================================
Keywords          :  
Technology        : kbWinNTsearch kbWinNT351search kbWinNTSsearch kbWinNTS351 kbWinNTS351search kbServicesNetwareSearch kbFPNW351
Version           : winnt:3.51

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.