DOCUMENT:Q143155  08-AUG-2001  [winnt]
TITLE   :No Audio with Crystal Audio or SoundBlaster AWE32
PRODUCT :Microsoft Windows NT
PROD/VER:4.0
OPER/SYS:
KEYWORDS:kbhw kbsound kbHardware

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Workstation version 4.0 
 - Microsoft Windows NT Server version 4.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

You do not receive audio from your Crystal Semiconductor audio chip or Creative
Labs SoundBlaster AWE32 PnP Wavetable Synthesizer.

CAUSE
=====

This problem may occur for either of the following reasons:

 - You ran PnPISA from the Windows NT 4.0 CD (or any of the Service Packs) and
   selected "Do not install a driver (Windows NT will not prompt you again)."

 - The Creative Labs Advanced Wavetable Effects (AWE) Synthesizer is installed
   and a Windows NT driver was not available when you were prompted to use the
   Windows NT default driver. In this scenario, Do Not Install Driver was chosen
   automatically.

RESOLUTION
==========

You can resolve this problem by obtaining the Windows NT 4.0 Service Pack 3
CD-ROM or by downloading Service Pack 3. For information on obtaining the latest
Service Pack, query on the following word in the Microsoft Knowledge Base
(without the spaces):

   S E R V P A C K

Service Pack 3 - CD-ROM Version
-------------------------------

Using the Windows NT 4.0 Service Pack 3 CD-ROM, perform the following steps to
correct this problem:

1. Start a command prompt.

2. Go to the folder on the Service Pack 3 CD-ROM for your architecture (for
   example, i386 for Intel.)

3. Type the following command:

   "devpre devupd.inf" (without the quotation marks)

   NOTE: Devpre does not support UNC paths. You must map a network drive if you
   are attaching to the Service Pack 3 CD-ROM across a network.

4. A dialog box titled Windows NT Setup reads "Setup is examining your
   computer's hardware."

5. You may receive a prompt for the path of your audio drivers.

   a. Enter the path name to the Service Pack 3 CD-ROM for the Audio driver.

   b. Click OK on the Select Device screen.

   c. If you are not presented with resource settings, click Set Configuration
      Manually.

   d. If there are conflicting devices at the bottom of the screen, resolve them
      first by selecting a basic configuration that allows the selection of
      resources that do not conflict with devices already installed.

      To change resources, highlight the offending setting in the Resource
      Settings window, click Change Setting and select a setting that does not
      conflict with another device, and then click OK. Repeat for any settings
      that show a conflict.

6. If you receive a prompt for any other functions, follow the previous steps.

7. Restart your computer.

8. Your audio card should be working properly at this point. If you need to
   change the resources that your card is using, open the Multimedia utility in
   Control Panel, click the Devices tab, click Properties for the Crystal
   Semiconductor driver or the Creative Labs SoundBlaster Plug and Play driver,
   and then click Settings. This opens the same resource dialog box that was
   invoked when installing the device.

Service Pack 3 - Download Version
---------------------------------

Because the downloadable version of the Service Pack is in CAB format, you must
manually extract the files with the /x switch before running DEVPRE. Please see
the Readme.txt file included with the self-extracting version of Service Pack 3
for more information.

1. Start a command prompt.

2. Create a temporary folder on your hard disk, copy the Service Pack executable
   to this folder, and extract the files contained in the Service Pack by typing
   the name of the executable followed by the /x switch:

   <Filename> /x

3. Type the following command:

   "devpre devupd.inf" (without the quotation marks)

   NOTE: Devpre does not support UNC paths. You must map a network drive if you
   are attaching to the Service Pack 3 CD-ROM across a network.

4. A dialog box titled Windows NT Setup reads "Setup is examining your
   computer's hardware."

5. You may receive a prompt for the path of your audio drivers.

   a. Enter the path name to the Service Pack 3 CD-ROM for the Audio driver.

   b. Click OK on the Select Device screen.

   c. If you are not presented with resource settings, click Set Configuration
      Manually.

   d. If there are conflicting devices at the bottom of the screen, resolve them
      first by selecting a basic configuration that allows the selection of
      resources that do not conflict with devices already installed.

      To change resources, highlight the offending setting in the Resource
      Settings window, click Change Setting and select a setting that does not
      conflict with another device, and then click OK. Repeat for any settings
      that show a conflict.

6. If you receive a prompt for any other functions, follow the previous steps.

7. Restart your computer.

8. Your audio card should be working properly at this point. If you need to
   change the resources that your card is using, open the Multimedia utility in
   Control Panel, click the Devices tab, click Properties for the Crystal
   Semiconductor driver or the Creative Labs SoundBlaster Plug and Play driver,
   and then click Settings. This opens the same resource dialog box that was
   invoked when installing the device.

Additional query words: prodnt sb
======================================================================
Keywords          : kbhw kbsound kbHardware 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400
Version           : 4.0
Issue type        : kbbug

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.