DOCUMENT:Q125060  08-AUG-2001  [winnt]
TITLE   :Using Novell's ODINSUP and VLM with Network Client 3.0
PRODUCT :Microsoft Windows NT
PROD/VER:3.5 4.0
OPER/SYS:
KEYWORDS:kb3rdparty kbnetwork

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server versions 3.5, 4.0 
 - Microsoft Network Client for MS-DOS version 3.0 
-------------------------------------------------------------------------------

This article provides instructions on how to install the Novell ODINSUP
(ODI/NDIS) driver to work with Microsoft Network Client for MS-DOS version
3.0 (included on the Windows NT Server version 3.5 CD). This article
discusses and displays the following using the Intel Etherexpress 16 TP
network card as an example:

 - Network Client and ODINSUP Setup Instructions

 - Example PROTOCOL.INI

 - Example SYSTEM.INI

 - Example AUTOEXEC.BAT

 - Example CONFIG.SYS

 - Example NET.CFG

For additional information regarding the Novell ODINSUP.COM driver, contact
Novell Technical Support at (800) 638-9273.

Network Client and ODINSUP Setup Instructions
---------------------------------------------

Since this configuration requires the Novell IPXODI driver, make sure you
can connect to a NetWare server using the IPXODI driver and VLM.

1. From the CLIENTS\MSCLIENT\DISKS subdirectory of the Windows NT Server version
   3.5 CD, copy the contents of DISK1 and DISK2 to blank floppy disks (labeling
   the disks Disk 1 and Disk 2).

2. From Disk 1, run SETUP and press ENTER to set up Network Client.

3. Specify the location of the Network Client installation and press ENTER.

4. For adapter driver, select the ODI/NDIS support driver.

5. Enter the user name. In the next screen, verify and change the computer name,
   workgroup name and domain name, if necessary.

6. Change the setup options, if necessary. This screen enables you to change
   your redirector, startup, logon and network pop-up options.

7. Choose change network configuration and highlight the NWLink IPX Compatible
   Transport. Choose Change Settings and verify the frame type.


1. After the configuration for Network Client is complete, insert the disk with
   Novell's ODINSUP.COM (when requested).

2. When Setup is complete, restart the computer.

Example PROTOCOL.INI
--------------------

Check all bindings to make sure that the ODI MLID driver is being used.

[network.setup]
version=0x3110
netcard=odinsupmac,1,ODINSUPMAC,1
transport=ms$nwlink,MS$NWLINK
transport=ms$ndishlp,MS$NDISHLP
lana0=odinsupmac,1,ms$nwlink
lana1=odinsupmac,1,ms$ndishlp

[MS$NWLINK]
FRAME=Ethernet_802.2
DriverName=nwlink$
BINDINGS=exp16ODI (This is the ODI MLID driver)

[Link Driver ]
data=FRAME Ethernet_802.3
data=FRAME Ethernet_802.2
data=FRAME Ethernet_II
data=FRAME Ethernet_snap
data=Link Driver

[NWLINK]
BINDINGS=exp16odi (This is the ODI MLID driver)

[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP

[ODINSUPMAC]
<BR/><BR/>
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=exp16odi (This is the ODI MLID driver)

Example SYSTEM.INI
------------------

[network]
filesharing=no
printsharing=no
autologon=yes
computername=<computer name>
lanroot=C:\NET
username=<user name>
workgroup=<workgroup name>
reconnect=yes
dospophotkey=N
lmlogon=1
logondomain=<domain name>
preferredredir=full
autostart=full
maxconnections=8
maxnwsess=8

[network drivers]
transport=ndishlp.sys
devdir=C:\NET
LoadRMDrivers=yes

[Password Lists]
*Shares=C:\NET\Shares.PWL
<user name>=C:\NET\<user name>.PWL

Example AUTOEXEC.BAT
--------------------

@ECHO OFF
PROMPT $p$g
C:\NET\net init
C:\NOVELL\lsl
C:\NOVELL\exp16odi (This is the ODI MAC driver)
C:\NET\odinsup
C:\NET\net start netbind
C:\NOVELL\ipxodi
C:\NOVELL\vlm
C:\NET\net start workstation

Example CONFIG.SYS
------------------

DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE noems
BUFFERS=15,0
FILES=30
DOS=High,UMB
lastdrive=z
FCBS=4,0
DEVICE=C:\DOS\SETVER.EXE
DEVICE=C:\NET\ifshlp.sys

Example NET.CFG
---------------

Preferred server=<NetWare Server>
SHOWDOTS=ON
PB BUFFERS 7
Link support
max boards 4
max stacks 8
Link Driver exp16odi

// int 5
// port 300
// frame Ethernet_802.3
// frame Ethernet_802.2
// frame Ethernet_II
// frame Ethernet_SNAP

The ODINSUP.COM and NetWare products discussed here are manufactured by
Novell, Inc., a vendor independent of Microsoft; we make no warranty,
implied or otherwise, regarding these products' performance or
reliability.

Additional query words: prodnt

======================================================================
Keywords          : kb3rdparty kbnetwork 
Technology        : kbWinNTsearch kbWinNT350search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS350 kbWinNTS350search kbAudDeveloper kbZNotKeyword kbNetworkClientSearch kbNetworkClient300DOS
Version           : 3.5 4.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.