ID: Q110319
The information in this article applies to:
If you run the Word for Windows Setup program from one disk drive (such as A), then later run Setup from a different disk drive (such as B) or from a different network location, Word prompts you to insert the disks in the drive from which you originally installed Word. Setup gives you no opportunity to designate a different disk drive.
Setup records the drive from which you originally installed Word in the SETUP.STF file, which is located in the <WINWORD>\SETUP subdirectory. Setup refers to this recorded location in subsequent Setup sessions when it prompts you to insert Word disks.
If you want to install Word from a different drive, you must edit your SETUP.STF file using the following procedure:
1. Exit Word Setup.
2. Make a backup copy of the original SETUP.STF
3. Open the SETUP.STF file in a spreadsheet application such as Microsoft
Excel or a text editor such as Windows Write.
4. In SETUP.STF, search for "Source Directory" (without the quotation
marks). This setting is near the beginning of the file.
5. Replace the old drive letter and path with the new one, then save and
close the file. For example, if you want to use drive B instead of drive
A to install Word, change the SETUP.STF setting to the following:
Source Directory <TAB> B:\ <TAB>
Note: In the above example, <TAB> means to press TAB. (This is a three-
column, tab-delimited text file.)
6. Save the SETUP.STF in a text format from whatever editor you are using.
"Microsoft Word User's Guide," version 6.0, pages 771-772
KBCategory: kbnetwork KBSubcategory: Additional query words: 6.0 add remove office winword word6 word7 6.0a 6.0c 7.0 word95 wrong
Keywords : kbsetup kbnetwork
Version : 6.0 6.0a 6.0c 7.0
Platform : WINDOWS
Last Reviewed: February 6, 1998