DOCUMENT:Q156656 15-FEB-2002 [msnetwork] TITLE :Err Msg: Remote Server Disconnect PRODUCT :The Microsoft Network PROD/VER::2.0,2.5,2.51,2.52,2.6 OPER/SYS: KEYWORDS:kbenv kberrmsg kbtlckbfaq ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - The Microsoft Network versions 2.0, 2.5, 2.51, 2.52, 2.6 ------------------------------------------------------------------------------- SYMPTOMS ======== When you attempt to connect to MSN, The Microsoft Network, using the Internet and MSN service type, you may receive the following error message: Remote Server Disconnect CAUSE ===== This message may appear for these reasons: - The TCP/IP protocol bound to the Dial-Up adapter has been damaged. This most likely applies if you have connected successfully in the past. - Some of the necessary components for the Internet connection are not installed, have been damaged, or have not been fully configured. The required components are in MSN version 1.3 and Microsoft Internet Explorer version 2.0 or 3.0. RESOLUTION ========== To resolve this issue, use the appropriate method. Damaged TCP/IP Protocol ----------------------- To correct a damaged TCP/IP protocol, remove and reinstall the Dial-Up adapter. To remove the Dial-Up adapter, follow these steps: 1. In Control Panel, double-click Network. 2. Click TCP/IP->Dial-Up Adapter. 3. Click Remove. 4. Click OK or Close until you return to Control Panel. 5. Reinstall the component. The following steps are based on Internet Explorer versions: Internet Explorer 3.x or earlier a. Click Start, point to Programs, and then point to Accessories. b. Point to Internet Tools, and then click Internet Setup Wizard or Get On The Internet. Continue to follow the instructions on the screen. MSN version 2.5x or 2.6 with Microsoft Internet Explorer 4.0 or 5.0 a. Click Start, point to Find and click "Files Or Folders". b. In the Named box type, icwscrpt.exe, and then click Find Now. c. In the list of files found, double click icwscrpt.exe. If more than one file named icwscrpt.exe then double-click the file with the uppercase I. If any dialogue boxes or prompts appear onscreen relating to 'Version Conflicts' then click OK. d. On the desktop, double click on the MSN icon. The following message will appear Connection Manager requires some Components that are not installed on your computer. Do you want Connection Manager to install these?. Click Yes. You may be asked for your Windows 95 CD-Rom or floppy disks. e. Restart the PC. Damaged or Missing Components (Classic MSN) ------------------------------------------- To check the version of MSN, use the right mouse button to click the MSN icon on the desktop, and then click Properties on the menu that appears. If MSN 1.3 is installed, the number is 4.3.5899. If neither version number appears, install MSN 1.3 with the following steps: 1. Double-click the MSN icon. 2. Click Settings. 3. Click Access Numbers. 4. In the Service Type box, click The Microsoft Network. 5. Click Change to select your primary and backup numbers, and then click OK. 6. Connect to MSN. Download MSN version 1.3 when you are prompted to do so. Follow these steps to check whether Internet Explorer is installed: 1. In Control Panel, double-click Add/Remove Programs. 2. On the Install/Uninstall tab, check whether Internet Explorer version 2.0 or 3.0 appears in the list of installed programs. If neither version appears, follow these steps: 1. Connect to MSN (using the MSN Only service type) and then download a version of Internet Explorer. 2. Use the Internet Setup Wizard (Internet Explorer 2.0) or Get On the Internet (Internet Explorer 3.0) to configure your system again. To do so, click the Start button, point to Programs, point to Accessories, point to Internet Tools, and then click Internet Setup Wizard or Get On The Internet. Follow the instructions on the screen. Damaged or Missing Components (MSN 2.0) --------------------------------------- To uninstall and reinstall the MSN 2.0 components, follow these steps: 1. Insert the MSN 2.0 CD-ROM. 2. If the Welcome To MSN screen appears, close it. 3. Click Start, point to Find, and then click "Files Or Folders". 4. In the Named box, type uninst.exe. 5. In the Look In box, click the CD-ROM drive, and then click Find Now. 6. Double-click the Uninst.exe file to run it. 7. When the Uninst.exe program is finished, restart the computer. 8. Reinsert the MSN 2.0 CD-ROM, and then reinstall MSN. MORE INFORMATION ================ For additional information about configuring TCP/IP, see the following article in the Microsoft Knowledge Base: Q172552 How to Configure TCP/IP for The Microsoft Network Additional query words: msn 1.00 2.00 2.50 2.60 ====================================================================== Keywords : kbenv kberrmsg kbtlc kbfaq Technology : kbMSNSearch kbMSN200 kbMSN252 kbMSN251 kbMSN260 kbMSN250 Version : :2.0,2.5,2.51,2.52,2.6 Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.