DOCUMENT:Q318473  18-FEB-2002  [msnetwork]
TITLE   :Verify Settings in Internet Protocol Properties
PRODUCT :The Microsoft Network
PROD/VER::
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - MSN DSL, version 2.0 
 - the operating system: Microsoft Windows 2000 
 - the operating system: Microsoft Windows XP 
-------------------------------------------------------------------------------

SYMPTOMS
========

You may need to confirm that the settings in your Internet Protocol Properties
(TCP/IP) are set to obtain IP addresses and DNS server addresses automatically
if:

 - You are using the Arescom 860 external DSL Modem with either Windows 2000 or
   Windows XP and are unable to obtain an IP address automatically from the
   modem's DHCP server.

 - You previously had a working connection when using MSN DSL Broadband service
   but after changing a setting or using another computer, you are now seeing an
   error message in your Internet browser when trying to access the Web.

CAUSE
=====

The IP address for your current connection is not the correct IP address to use
for the Arescom 860 external DSL Modem.

RESOLUTION
==========

To verify the settings in your Internet Protocol Properties (TCP/IP)

1. On your desktop, right click the icon for My Network Places, and then click
   Properties.

2. In the Properties window, right click the adapter card your Arescom modem is
   using. (This may read Local Area Connection or Arescom USB Network Adapter,
   for instance.) Then click Properties.

3. In the Properties dialog box, on the General tab, click Internet Protocol
   (TCP/IP) and then click Properties.

4. In the Internet Protocol (TCP/IP) dialog box, on the General tab, select both
   Obtain an IP address automatically and Obtain DNS server address
   automatically.

5. In the Internet Protocol (TCP/IP) dialog box, on the Alternate Configuration
   tab, select Automatic private IP address.

6. Click OK to save your changes.

To reset your IP address

1. From the Start menu, click Run, and then type "cmd".

2. In the Command window, type "ipconfig/release" to view the current IP
   address.

3. Type "ipconfig/renew". Your IP address should now be listed as "192.168.1.2".
   If it is not, go to Verify Settings in Internet Protocol Properties for
   additional troubleshooting steps.

4. If the IP address is listed as "192.168.1.2", then attempt to connect to the
   Internet using your Internet browser.

Additional query words: kbimu

======================================================================
Keywords          :  
Technology        : kbOSWin2000 kbOSWinSearch kbOSWinXP kbMSNSearch kbOSWinXPSearch kbMSNDSL200
Version           : :
Issue type        : kbprb

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2002.