DOCUMENT:Q89466  30-JUL-2001  [lanman]
TITLE   :LAN Man 2.1 Test Summary (NSSI Network Security Systems)
PRODUCT :Microsoft LAN Manager
PROD/VER:
OPER/SYS:
KEYWORDS:

======================================================================
SUMMARY
=======

The following are the test results for the IPS/A.I. 800 uninterruptable power
supply (UPS). The test was conducted as part of the Microsoft Compatibility Lab
(MCL) peripheral test for LAN Manager version 2.1:

MORE INFORMATION
================

Manufacturer
------------

NSSI Network Security Systems, Inc.
9401 Waples Street
San Diego CA 92121
(800) 755-7078

Date Tested
-----------

May 30, 1992

Uninterruptable Power Supply Data
---------------------------------

Model:                          IPS/A.I. 800
Serial number:                  1264
Supplied cable part number:     5970250 A for use with LANSAFE

                                5970246-01  for use LAN Manager 2.1

Vendor supplied software:       LANSAFE/A.I.+ OS/2 3.00
Software part number:           5722020-01

Testing Environment
-------------------

Operating system:      OS/2 1.3
Network:               LAN Manager 2.1
Test platforms:        486/33 16 MB RAM
Bus specification:     EISA
Network topology:      Ethernet

LANMAN.INI [UPS] Settings
-------------------------

BatteryTime:          60
CmdFile:             N/A
MessDelay:             2
MessTime:            300
Recharge:            100
Signals:             111
VoltLevels:          111

Final Test Results
------------------

Test Focus                           Pass   Anomalies and/or Workarounds
----------                           ----   ----------------------------

Installation                          Yes
Fully chargeable                      Yes
Power lost signal                     Yes
Power restored signal                 Yes
Low battery signal to server          Yes
Shut down server                      Yes
Server boots when power restored      Yes
Sustains server power for 5 minutes   Yes

Additional Test Results Using LAN Manager 2.1 UPS Service
---------------------------------------------------------

UPS switch settings:

   Switch    Position
   ------    --------

     4          OFF
     3          ON
     2          OFF
     1          ON

The UPS was connected to COM1 using an NSSI cable (part number 5970246-01).

LAN Manager UPS service configured for use with COM1 added the following line to
CONFIG.SYS:

   device=c:\<lan root>\drivers\upsdrv.os2

This driver must be installed before COM0x.SYS.

Additional Test Results Using LANSAFE
-------------------------------------

UPS switch settings used with LANSAFE:

   Switch     Position
   ------     --------
     4          ON
     3          ON
     2          ON
     1          OFF

LANSAFE AI+ OS/2 version 3.0 (NSSI part number 5722020-01) was installed
replacing the UPS service of LAN Manager because of the following additional
features and functionality:

 - Power monitoring

 - Power management

 - Remote monitoring, shutdown, and reboot of IPS/A.I 800

To use LANSAFE remote IPS/A.I. console, the workstation must be running OS/2 and
have admin privileges on the server; the server must be running LANSAFE local
IPS/A.I Console.

The UPS was connected to COM1 using NSSI cable (part number 5970250 A). LANSAFE
replaces the UPS service of LAN Manager, and makes the following modifications
to CONFIG.SYS and STARTUP.CMD.

LANSAFE configured for use with COM1 adds the following line to CONFIG.SYS:

   device=c:\lansafe\ipsia.sys 03f8 4

Note: The UPS driver for LAN Manager should not be installed, and the UPS service
should not be started when using LANSAFE.

Modifications made to STARTUP.CMD:

   REM The next 5 lines start IPS/A.I. monitoring. DO NOT REMOVE!
   SETLOCAL
   C:
   CD C:\LANSAFE
   START IPSCON.EXE
   ENDLOCAL

Additional query words: certification 2.1 2.10

======================================================================
Keywords          :  

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.