DOCUMENT:Q94064  30-JUL-2001  [lanman]
TITLE   :Installing IBM OS/2 1.3 on an ALR M.P.S System
PRODUCT :Microsoft LAN Manager
PROD/VER:
OPER/SYS:
KEYWORDS:

======================================================================
SUMMARY
=======

The following procedure is to be used to install IBM OS/2 version 1.3 on an ALR
M.P.S. system:

MORE INFORMATION
================

How to Limit the Maximum Amount of Memory
-----------------------------------------

In order for IBM OS/2 1.3 to install properly, you must first limit the maximum
amount of RAM the system can recognize to 16 MB. If you don't do this, OS/2 1.3
will lock up right after the Government Users message screen. To set the limit,
you will need the MC systems Setup/Utilities disk that came with your system.
Follow these steps to limit the maximum memory the system can recognize:

1. Insert an MS-DOS disk in Drive A and turn on the machine.

2. Once the computer has booted to an A> prompt, remove the MS-DOS disk and
   insert the MC systems Setup/Utilities disk in drive A.

3. Start the Setup program by typing:

   " A:
   CD\SETUP
   PRD" (without the quotation marks)

   This will start the Setup program. Follow the prompts. After each selection
   you will need to press ENTER.

4. Select Configuration.

5. Select Change.

6. Select Internal Options. Here you will see all the available settings for the
   motherboard.

7. Scroll down to the selection marked Maximum Memory Limit and press ENTER.

8. Select 16 MB limit and press ENTER.

9. Exit the Setup program by pressing ESC five times. Your system will reboot
   itself, making this change effective.

You are now ready to install the OS/2 1.3 driver.

Installing the IBM OS/2 1.3 Driver
----------------------------------

Most of the newer technology ESDI and all SCSI hard drive controllers will
require a driver that is provided by the controller manufacturer. If you are
using an ESDI or SCSI controller and are experiencing difficulties, please check
to be sure that you are using the correct driver and also the correct version.
Check with your dealer or the controller manufacturer for this information. If
you are using the IDE interface that is integrated into the M.P.S. system and
your hard drive is larger than 85 MB, you will need to use the driver provided
with the system to ensure complete compatibility with the MS-DOS mode of OS/2
1.3. To install this driver, do the following:

Note: This driver is to be used on an M.P.S. system with OS/2 1.3 and an IDE hard
drive larger than 85 MB only. If you are using OS/2 version 1.30.10, please be
sure to download the latest version of the DISK02.SYS driver from the OS/2
library on ALR BBS at (414 458-6834).

1. Insert the IBM OS/2 installation disk into drive A. Turn on the system and
   install OS/2. Be sure to follow all of the instructions and swap the disks as
   your system asks for them. When the setup prompts "Do you have any device
   support diskettes to install?", select No.

2. Once OS/2 is installed, reboot your system with the OS/2 installation disk in
   drive A. Wait until the system displays the blue IBM screen and then press
   ESC. This will exit to an OS/2 [A:\] prompt.

3. You must first rename the existing DISK02.SYS on your C drive to DISK02.OLD.
   This can be accomplished with the following commands:

   C:
   CD\
   REN DISK02.SYS DISK02.OLD

4. Insert the supplemental MCS drivers diskette into drive A. Copy the file
   DISK02.SYS to the root of your C drive with the following command:

   copy disk02.sys c:\

5. Press CTRL+ALT+DEL to reboot your system. Your new OS/2 1.3 IDE driver should
   now be installed and operating.

Additional query words:

======================================================================
Keywords          :  

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.