DOCUMENT:Q96198 30-JUL-2001 [lanman] TITLE :TCP/IP PROTOCOL.INI Documentation Updates and Corrections PRODUCT :Microsoft LAN Manager PROD/VER: OPER/SYS: KEYWORDS:kbnetwork ====================================================================== SUMMARY ======= This article contains corrections and additions to the TCP/IP PROTOCOL.INI configuration parameters. The first section contains corrections to the published documentation. The second contains several undocumented parameters. Documentation Corrections and Explanations ------------------------------------------ BCASTADDR: The IP address to which broadcasts are sent. The default for this is a segment broadcast, which is the workstation's IP address with the node portion all set to ones. Not supported for OS/2. TCPKEEPALIVE: The interval between sending TCP keepalive packets on an idle connection. Keepalives are sent as a connection assurance mechanism. Default: 600 seconds Range: 60-32767 TCPCONNTIMEOUT: The timeout period for establishing a new connection. Default: 30 seconds Range: 1-32767 SCOPE: The SCOPE parameter is not supported under OS/2. Undocumented Parameters ----------------------- TCPRETRIES: Under LAN Manager versions earlier than 2.2, the number of TCPRETRIES is fixed at 17, and the following timings are used for TCPRETRIES: Retry # Delay Total Elapsed Time -------------------------------------------------- 1st retry: 1 second 1 second 2nd retry: 2 seconds 3 seconds 3rd retry: 4 seconds 7 seconds 4th retry: 6 seconds 13 seconds 5th retry: 8 seconds 21 seconds 6th retry: 10 seconds 31 seconds 7th retry: 15 seconds 46 seconds 8th retry: 20 seconds 66 seconds 9th retry: 30 seconds 96 seconds 10th retry: 40 seconds 136 seconds 11th retry: 50 seconds 186 seconds 12th retry: 60 seconds 246 seconds 13th retry: 80 seconds 326 seconds 14th retry: 100 seconds 426 seconds 15th retry: 120 seconds 546 seconds 16th retry: 150 seconds 696 seconds 17th retry: 200 seconds 896 seconds Under 2.2, the TCPRETRIES parameter is exposed. The same timings are used, but by specifying a value for TCPRETRIES in PROTOCOL.INI you can control the timeout period. The default has been changed to 8. Default: 8 (About 1 minute total) Range: 1-17 (17 would be about 15 minutes) UDP_Q_PER_USER: The number of UDP buffers to allocate for each UDP port. When a datagram is received for a given UDP port, it must be queued by UDP. A pool of buffers is maintained for this purpose. UDP stuffs incoming datagrams into buffers; upper layers read them from the queue and return buffers to the pool. When no UDP buffers are available, datagrams are dropped. Extremely busy (high broadcast) network clients may benefit from raising this value slightly above the default. If a third-party application is using UDP, the number may also need to be increased. DOS OS/2 Default: 3 16 Range: 1-10 1-64 UDP_Q_TOTAL: The total number of UDP buffers available for all ports. DOS OS/2 Default: 20 64 Range: 1-30 1-256 TCPMAXBDS2USER: (OS/2 only) The maximum number of TCP buffers a client may hold. Applications using large numbers of small packets may benefit from increasing this parameter. Default: 4 Range: 1-30 TCPMAXBDS2HOLD: (OS/2 only) The total number of TCP buffers allocated for all incoming TCP packets. Applications using large numbers of small packets may benefit from increasing this parameter. Default: 10 Range: 1-30 BCASTTIMEOUT: Timeout during netbios name query/registration, specified in multiples of timer-ticks (1 timer-tick = 55ms). 2.1a and 2.2 only. Default: 5 (this is what the RFC specifies) Range: 4-51 BCASTRETRY: Number of retries during NetBIOS name query/registration. 2.1a and 2.2 only. Default: 3 Range: Any number greater than 0 The above parameters override the existing documentation as shown. Care should be taken when spelling parameters, as they will be accepted but won't have any effect when mis-spelled. Additional query words: 2.10 2.1 2.10a 2.1a 2.20 2.2 tuning tcpip ====================================================================== Keywords : kbnetwork ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.