DOCUMENT:Q96778  30-JUL-2001  [lanman]
TITLE   :Verifying Printer Ports on a 3Server
PRODUCT :Microsoft LAN Manager
PROD/VER:
OPER/SYS:
KEYWORDS:

======================================================================
SUMMARY
=======

It is possible to verify printer ports directly on a 3Server using the COPY
command. This procedure allows isolation from the LAN Manager software and Print
Manager running on the 3Server. To copy directly to a printer port on the
3Server, do the following:

1. From an OS/2 workstation, log in as an administrator on the 3Server.

2. Do a NET ADMIN /C connection using the following command

      net admin \\servername /c

   where \\servername is the name of the 3server. You will now have a prompt that
   looks similar to below:

      [\\servername] _

3. From this command prompt, do a DIR command for *.CMD.

4. Select one of the listed files (these are OS/2 command files and are pure
   text).

5. Copy the selected file to the printer port (this could be LPT1 or COM1, for
   example, depending on what port the printer is connected to). The command is
   as follows:

      copy setmode.cmd lpt1

6. You should receive a "one file(s) copied" message. If the printer prints the
   file, you have then verified that the port and printer are functioning
   properly. If no printout is obtained, then a problem exists with either the
   port, printer, or printer cabling.

MORE INFORMATION
================

If your printer is a PostScript printer, use the following commands:

   copy con lpt1
   showpage
   ^z

After the command is entered, you should receive a "one file(s) copied" message.
SHOWPAGE is the PostScript command to eject a page. On some older machines, you
may need to add the /B switch to the line. For example,

   copy file.txt lpt1 /b

This command sends the file in binary format, thereby avoiding any end-of-file
problems.

Additional query words: 2.10 3Com 3Server

======================================================================
Keywords          :  

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.