DOCUMENT:Q97659  30-JUL-2001  [lanman]
TITLE   :How to Add Pathworks for MS-DOS DECnet Client to Network
PRODUCT :Microsoft LAN Manager
PROD/VER:
OPER/SYS:
KEYWORDS:

======================================================================
SUMMARY
=======

This article details the process for adding a Pathworks for MS-DOS DECnet client
node to your network.

MORE INFORMATION
================

1. Determine that your PC meets minimum requirements for RAM, disk space,
   supported Ethernet or Token Ring adapter, MS-DOS 5.0, and Windows 3.1.

2. Determine that each Pathworks for MS-DOS client workstation has a software
   license.

3. Configure the physical network layer, which may entail running cable,
   installing the adapter, and troubleshooting memory or IRQ conflicts. You need
   the driver specific to your adapter unless you are using Digital DEPCA NIC
   and loading the native (monolithic) DEPCA driver. Native DEPCA is acceptable
   if your only transport protocol is DECnet, otherwise load NDIS driver.

4. Add the new Pathworks client node DECnet name and address to the server's NCP
   database (this step must be performed by the network administrator).
   Configure the new user as a PCSA user for access to the server. Even if the
   new user is already set up as a VMS user on a VMS server, you must still add
   it as a PCSA user.

5. Generate the client initial boot disk at any network workstation by running
   NETSETUP, filling in the appropriate node name, address, Ethernet adapter,
   protocols, memory, and so on.

6. With the new client boot disk, boot the new PC from drive A, connecting to
   server. Run NETSETUP to download network software from server to client.

7. You may still need to edit CONFIG.SYS to be sure PROGMAN finds PROTOCOL.INI.
   The PROTOCOL.INI generated by NETSETUP is usually correct.

Notes
-----

Do NOT put the PATH statement in AUTOEXEC.BAT. The network path is set in
STARTNET.BAT and will be lost (overwritten) if it is set in AUTOEXEC.BAT. Add
the path to STARTNET.BAT or use the %PATH% variable to retain the network path.
If you do not set the network path, network commands won't work. For example, to
add Windows to your path, add this line after 437USA in STARTNET.BAT:

   " %PATH%;C:\WINDOWS" (without the quotation marks)

Start the Print Screen utility (PSC.COM) before the redirector to avoid conflict.
You must copy PSC.COM to %BOOT% because you are not connected to %SYSD% until
the redirector loads. Add this line to STARTNET.BAT before loading the
redirector:

   " %BOOT%\DECNET\PSC.COM" (without the quotation marks)

Configure DEC Mail by running MAILSETUP, inserting the Mail server node name. To
turn mail notification on (so that a popup notifies you of new mail), you must
connect with the password to the mail server and use the Other and Modify User
Profile menus.

You may configure DEC VT terminal emulation by running SETHOST and using the F3
setup menu for configuring LAT and CTERM sessions for VMS server logon and
network modem dialing configuration. Run SETHOST to initiate these same
sessions.

Pathworks for MS-DOS client runs these files at boot time:

   CONFIG.SYS
   AUTOEXEC.BAT  Calls STARTNET.BAT
   STARTNET.BAT  Loads protocols and starts network, calls LOGON.BAT
   LOGON.BAT     Connects to server with user verification,
                  calls AUTOUSER.BAT
   AUTOUSER.BAT  Connects user to additional net resources

Set up Windows AFTER you install the Pathworks client so that you can add the
appropriate network applications to Windows. Perform these steps in this order:

1. Run

      c:\windows\setup/n

2. Choose the Pathworks 4.1 option for your network. This adds appropriate
   drivers to the [386enh] section of SYSTEM.INI.

3. Run %SYSD%:\MSWINV30\WIN3SETU to gain Windows compatibility with Pathworks.

4. Set up applications for the network in Windows by allowing Setup to search
   the network drive and add modules such as these:

      NFT Network File Transfer
      FAL  File Access Listener
      NML Network Management Listener
      Spawner
      SEDT Screen Editor
      NCP Network Control Protocol
      Pathworks E-MAIL
      SETHOST

Additional query words: 2.00 2.10 2.10a 2.20

======================================================================
Keywords          :  

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.