DOCUMENT:Q165017  19-DEC-1999  [exchange]
TITLE   :Description of Event ID 9302
PRODUCT :Microsoft Exchange
PROD/VER:winnt:4.0,5.0,5.5
OPER/SYS:
KEYWORDS:kbusage exc4 exc5 exc55

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Exchange Server, versions 5.5, 4.0, 5.0 
-------------------------------------------------------------------------------


SUMMARY
=======

When you look through event logs, you might come across the following warning
message:

   Event id 9302

Description from the Infollog.cfg file from the Exchsrvr\Mtadata directory:

   The transport configuration type %1 for the directory entry %2 is not
   one of the supported values. Reconfigure the transport configuration
   type in the identified directory entry. [%3 %4 %5 %6] (8)

***************************************************************************
* MESSAGE DESCRIPTION: Bad Transport config
***************************************************************************
*
* MSG LABEL        INFOID    INFOTYPE  SEVERITY  COMMENT
*
SBCDBTRN           9302    W 7         8         Bad Transport config
*
* PARAMETER LABEL  PARMID  PARMTYP DIAGLEV MAXLEN  COMMENT
*
TRANTYPE           130     I       1       0       Transport type
TRANSDN            146     S       1       0       Entry DN
*
-          Bad transport config : type = %1 (see OTCSFIRE.C)
-            Entry DN %2

Sample warning message:

   The transport configuration type 1 for the directory entry
   /o=Microsoft/ou=Cartoonville/cn=Configuration/cn=Servers/cn=SAMEERP66
   /cn=Microsoft MTA is not one of the supported values. Reconfigure the
   transport configuration type in the identified directory entry.
   [BASE IL OPERATOR 34 217] (8)


The list for the transport types are as follows:

Type     0x01    stands for  RFC 1006
Type     0x02    stands for  TP4
Type     0x03    stands for  Eicon X.25
Type     0x04    stands for  Named pipes over RAS connection
Type     0x05    stands for  RPC

MORE INFORMATION
================

This warning message does not reflect any problems with Microsoft Exchange
Server. Look at other warnings and/or errors associated with this warning for
more troubleshooting information.

Additional query words:

======================================================================
Keywords          : kbusage exc4 exc5 exc55 
Technology        : kbExchangeSearch kbExchange500 kbExchange550 kbExchange400 kbZNotKeyword2
Version           : winnt:4.0,5.0,5.5
Issue type        : kbinfo

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.