DOCUMENT:Q254548 20-MAY-2001 [exchange] TITLE :XCLN: Connecting Windows CE Handheld PCs to Exchange Server PRODUCT :Microsoft Exchange PROD/VER:WINDOWS:2.0,3.0,3.0 Professional Edition,5.0,5.5; winnt:4.0,5.0,5.5 OPER/SYS: KEYWORDS:exc4 exc5 exc55 ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Exchange Active Server Components, version 5.0 - Microsoft Outlook Web Access, version 5.5 - Microsoft Exchange Server, versions 4.0, 5.0, 5.5 - the operating system: Microsoft Windows CE, versions 2.0, 3.0 ------------------------------------------------------------------------------- SUMMARY ======= This article describes several methods that you can use to connect Windows CE PC companion devices to Exchange Server. The easiest method uses a browser to connect to Exchange Server by using a Web interface. To use this method, the Outlook Web Access (OWA) component of Exchange Server must be installed on either the Exchange Server computer itself or on another computer. You can also connect to Exchange Server by using standard Internet protocols, such as Post Office Protocol version 3 (POP3) and Internet Message Access Protocol, Version 4rev1 (IMAP4). This article does not describe third-party methods to connect Windows CE PC companion devices to Microsoft Exchange Server. This article only describes the "out of the box" solutions to connect these devices to Exchange Server. Also, this article does not describe how to synchronize your device by using a desktop personal computer; synchronize your device by using the software that is included with your device. MORE INFORMATION ================ Connecting to Exchange Server By Using a Browser ------------------------------------------------ Windows CE version 2.1 (Windows CE Pro) contains a browser that supports frames and scripting, as well as secure links and 128-bit security. This browser can connect to a standard OWA server and is the recommended method to connect devices that are running Windows CE 2.1 to Exchange Server. It requires the least amount of resources from the device that is running Windows CE. For more information about how to install OWA, see the Exchange Server 5.5 documentation. Connecting to Exchange Server By Using POP3 or IMAP4 ---------------------------------------------------- Windows CE 2.0 provides an Internet Mail Service (POP3 only) that you can configure to connect to Exchange Server. IMPORTANT: This service can only make serial, dial-up, or infrared connections to the POP3 server. This service is not compatible with Ethernet network connections. Windows CE 2.1 (Windows CE Pro) includes a POP3 service and an IMAP4 service. POP3 allows you to connect to only the Inbox; you cannot open any other folders. If you use the IMAP4 protocol, you can open folders other than the Inbox. Also, both of these protocols can use an Ethernet connection as well as serial, dial-up, or infrared connections. Serial connections require that you have the Windows CE synchronization software and a connecting cable installed directly on the Exchange Server computer. Likewise, an infrared connection requires the Exchange Server computer to be fitted with a compatible infrared device. Serial and infrared connections also require the Exchange Server computer to be physically available to the Windows CE users. Because of these requirements, it is unlikely that a serial or infrared connection would be made from a Windows CE PC companion device directly to an Exchange Server computer. For more information about how to configure one of these types of connections, see the Windows CE help files on how to create the connection on the device. A dial-up connection to the Exchange Server computer is the type of connection most likely to be used for remote connectivity. A compatible dial-up server must be configured either on the same computer that Exchange Server is installed on, or on another server that has connectivity to the Exchange Server computer. Microsoft Windows NT Remote Access Service (RAS) or Routing and Remote Access Service (RRAS) provide this capability. For additional information, click the article number below to view the article in the Microsoft Knowledge Base: Q174800 Documentation Location for Routing and Remote Access Service An Ethernet connection is the fastest method available to connect Windows CE PC companion devices to Exchange Server. If you use a compatible Personal Computer Memory Card International Association (PCMCIA) card or CompactFlash Ethernet card with a device that is running Windows CE, you can make a direct connection to a desktop personal computer for synchronization. Handheld PCs that are running Windows CE Pro can also make POP3 or IMAP4 connections to Exchange Server computers that are available on the local area network (LAN). For more information about how to configure one of these types of connections, see the Windows CE help files about how to create the connection on the device. For additional information, refer to the FAQ located at the following Web site: http://www.cewindows.net/wce/20/ethernet.htm If you use any of these services with Exchange Server 5.5 you can connect directly to your server by using POP3 or IMAP4. However, to send mail by using SMTP, you must ensure that the server that you want to connect to has the Internet Mail Service configured and running. This can be a separate server, or the same server that contains your mailbox. For additional information, click the article number below to view the article in the Microsoft Knowledge Base: Q169462 XFOR: Configuring POP3 Client for Remote Mail Configuration Resources --------- The Microsoft Windows CE home page: http://www.microsoft.com/windowsce/ The resource guide for PC Companions: http://windowsce.resourceguide.net/ For additional information, click the article numbers below to view the articles in the Microsoft Knowledge Base: Q240079 ActiveSync 3.0 Readme Q195517 Windows CE Services Version 2.2 Readme.txt File (1 of 2) Q195513 Windows CE Services Version 2.2 Readme.txt File (2 of 2) Q158178 Description of Windows CE Q220905 XFOR: Error Retrieving Mail by IMAP4 on Exchange Server with Windows CE Inbox Q185846 How to Send E-mail from an H/PC or P/PC Using a Desktop Computer Q186100 Known Issues in Pocket Outlook on a Handheld PC or Palm-size PC Q237961 XFOR: IMAP4 and POP3 Users Cannot Retrieve Messages The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Microsoft in no way guarantees the accuracy of this third-party contact information. Additional query words: ====================================================================== Keywords : exc4 exc5 exc55 Technology : kbOutlookSearch kbZNotKeyword6 kbExchangeSearch kbExchange500 kbExchange550 kbExchange400 kbZNotKeyword2 kbOWASearch kbOWA550 kbOSWinCE200 kbOSWinCE300 kbZnotKeyword7 kbExchangeActiveServComp500 kbOSWinCESearch Version : WINDOWS:2.0,3.0,3.0 Professional Edition,5.0,5.5; winnt:4.0,5.0,5.5 Issue type : kbinfo ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.