DOCUMENT:Q174624 09-AUG-2001 [winnt] TITLE :Improper Display Name for OEM Driver after Unattend Setup. PRODUCT :Microsoft Windows NT PROD/VER::4.0 OPER/SYS: KEYWORDS:kbsetup ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation version 4.0 - Microsoft Windows NT Server version 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== After you complete an unattended installation of Windows NT Workstation 4.0 or Windows NT Server 4.0 using the $OEM$\TEXTMODE option to install OEM SCSI device drivers, the Control Panel SCSI Adapters tool will only display the driver name instead of the full descriptions specified in the TXTSETUP.OEM [SCSI] section. For complete details on $OEM$\TEXTMODE usage, refer to the Windows NT 4.0 Deployment Guide from: http://www.microsoft.com/ntworkstation/deploy/default.asp NOTE: The Deployment Guide is valid for both Windows NT Workstation and Windows NT Server. CAUSE ===== The absence of the full description in the SCSI Adapters applet is because of the Key Name not being specified in the [SCSI] section of Txtsetup.oem. The [SCSI] section of Txtsetup.oem consists of three components; the ID, Description, and Key Name. If the last field Key Name is missing, the adapter description is not used properly. For Example: If you click the Devices tab in the Control Panel SCSI Adapters tool, you will see the device name as piixice.sys instead of the proper display name of Intel PIIX PCI Bus Master IDE Controller as defined in Txtsetup.oem. The Txtsetup.oem files [SCSI] section should consist of three components. The ID, Description, and Key Name. ID Description Key Name == =========== ======== piixide = "Intel PIIX PCI Bus Master IDE Controller", piixide NOTE: The ID and Key Name are the same. For Example: The information provided below is an example of an improper Textsetup.oem file. Note the missing Key Name in the [SCSI] section. [Disks] d1 = "Intel PIIX PCI Bus Master IDE Controller", \disk1.nt, \ [Defaults] scsi = piixide [SCSI] piixide = "Intel PIIX PCI Bus Master IDE Controller" <-- Missing key name [Files.scsi.piixide] driver = d1,piixide.sys, piixide inf = d1,oemsetup.inf RESOLUTION ========== To correct this problem, you need to add the Key Name to the entry under the [SCSI] section. This Texsetup.oem file below is configured properly to display a full Description. Note the addition of the Key Name. [Disks] d1 = "Intel PIIX PCI Bus Master IDE Controller", \disk1.nt, \ [Defaults] scsi = piixide [SCSI] piixide = "Intel PIIX PCI Bus Master IDE Controller", piixide [Files.scsi.piixide] driver = d1,piixide.sys, piixide inf = d1,oemsetup.inf Additional query words: unattend ====================================================================== Keywords : kbsetup Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 Version : :4.0 Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.