DOCUMENT:Q183464  10-AUG-2001  [winnt]
TITLE   :Windows NT Remote Boot Clients Lose Enhanced Keyboard Support
PRODUCT :Microsoft Windows NT
PROD/VER:WinNT:4.0
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Workstation version 4.0 
 - Microsoft Windows NT Server version 4.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

Following a remote program load (RPL) boot from a Windows NT server, enhanced
keyboard functionality is lost on the client for some applications.

CAUSE
=====

The Rpldisk.sys driver, used during the initial phase of a remote boot,
mistakenly clears a bit in the BIOS area in the memory of the client system that
indicates whether the attached keyboard is an enhanced keyboard.

Applications that check this flag to determine how to interact with the keyboard
will fail to detect an enhanced keyboard, and may elect not to use enhanced
keyboard functions.

RESOLUTION
==========

To resolve this problem, obtain the following fix.

This fix should have the following time stamp:

   04/02/98  10:14a                26,761 Rpldisk.sys (Intel)

STATUS
======

Microsoft has confirmed this to be a problem in Windows NT version 4.0. A
supported fix is now available, but has not been fully regression tested and
should be applied only to systems experiencing this specific problem. Unless you
are severely impacted by this specific problem, Microsoft recommends that you
wait for the next service pack that contains this fix. Contact Microsoft
Technical Support for more information.


MORE INFORMATION
================

An MS-DOS client can check the status of the enhanced keyboard flag using
Debug.com. At the debug prompt, type "d 40:96 L1" (without the quotation marks).
You will see a line like the following:

   0040:0090                    10                                    .

The enhanced keyboard flag is set if the value in the middle of the line is 10.
If, instead of the value 10 you see the value 00, the enhanced keyboard flag is
clear. Type "q" to exit from debug.

Rpldisk.sys only clears this flag if the keyboard is used to respond to the
following login prompt:

Type remoteboot username, or press enter if it is XXXXXXX:

If this prompt is allowed to time out, the flag will be left unchanged.

Additional query words: lanman ripl
======================================================================
Keywords          :  
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400
Version           : WinNT:4.0
Issue type        : kbbug
Solution Type     : kbfix

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.