DOCUMENT:Q185508  09-AUG-2001  [winnt]
TITLE   :Error Message: Service Pack Setup Error
PRODUCT :Microsoft Windows NT
PROD/VER:winnt:4.0 SP4,4.0 SP5,4.0 SP6,4.0 SP6a
OPER/SYS:
KEYWORDS:kberrmsg kbsetup kbFEA kbWinNT400sp4fea

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Workstation versions 4.0 SP4, 4.0 SP5, 4.0 SP6, 4.0 SP6a 
 - Microsoft Windows NT Server versions 4.0 SP4, 4.0 SP5, 4.0 SP6, 4.0 SP6a 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you attempt to install Service Pack 4 for Windows NT 4.0, you may receive
the following error message:

   Service Pack Setup Error. You do not have permission to update Windows
   NT. Please contact your system administrator.

CAUSE
=====

This behavior can occur if you run the Update.exe file from a folder other than
the Update folder. The Update.exe file must be run from the Update folder.

RESOLUTION
==========

To resolve this issue, run the Update.exe file from the Update folder.

The affected files are Update.exe and Update.inf. These files must be in the
Update folder or the error messages will occur.

MORE INFORMATION
================

The Update folder is located in the folder to which you extracted the Service
Pack files, and contains the following files:

   Update.exe
   Update.inf
   Update.nvt


This error only applies when the registry's RunOnce key is used to run a batch
file.

The batch file maps a network drive back to a server location where the Service
Pack 4 files are located (not under the $oem$ directory on the distribution
server) and then runs Update.exe. For more information concerning deployment
configurations, see the "Guide to Automating Windows NT Setup" deployment guide
located under Deployment Tools at the following Web site:

   http://www.microsoft.com/ntworkstation/

The other method most commonly used is to run the Update.exe program from the
Cmdlines.txt file. This will not work with Service Pack 4 because it contains
long file names that would be truncated during the text mode copy phase of
setup.

For additional information, see the following article in the Microsoft Knowledge
Base:

   ARTICLE-ID: Q194986
   TITLE : File Copy Error Using Update.exe With Service Pack 4


Additional query words: sp4 4.00

======================================================================
Keywords          : kberrmsg kbsetup kbFEA kbWinNT400sp4fea 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400search kbWinNT400search kbWinNTW400sp5 kbWinNTW400sp4 kbWinNTSsearch kbWinNTS400sp6 kbWinNTS400sp5 kbWinNTS400sp4 kbWinNTS400search kbWinNTW400sp6 kbWinNTW400SP6a
Version           : winnt:4.0 SP4,4.0 SP5,4.0 SP6,4.0 SP6a
Issue type        : kbinfo

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.