DOCUMENT:Q201499  16-AUG-2002  [winnt]
TITLE   :PRB: NSLOOKUP Shows No IP Address for a Domain Name
PRODUCT :Microsoft Windows NT
PROD/VER::4.0,4.0a,4.5
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft BackOffice Server 4.0 
 - Microsoft BackOffice Small Business Server versions 4.0, 4.0a, 4.5 
 - Microsoft Windows NT Server version 4.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you use NSLOOKUP to get information about a domain name, you only get the
domain name back and no IP address.

CAUSE
=====

This problem occurs because there is usually no IP address associated directly
to a domain name. IP addresses are usually associated to hosts inside the
domain.

RESOLUTION
==========

You can do the following to work around this problem:

Contact the administrator of the DNS server responsible for the domain in
question. Ask them to add an "A" record for the domain name to that domain's
zone file.

If the DNS server is a computer running Windows NT Server, simply create an "A"
record in the appropriate zone, leaving the Host Name edit box empty while
providing an appropriate IP address.

To create an "A" record in the appropriate zone, follow these steps:

1. Start Domain Name Service Manager.

2. Right-click your domain name, and then click New Record.

3. In the Record Type list, click A Record.

4. Leave the Host Name box blank.

5. Type the IP address you want to associate with the domain name.

6. Click OK.

NOTE: You cannot add this record if you right-click the domain name and then
click New Host. You must click New Record.

You will now see an entry in the zone file with the name of the domain in the
(Host) Name column and the specified IP address in the Data column.

At the NSLOOKUP prompt, typing the zone name will now list the IP address along
with the domain name.

Example (at the NSLOOKUP Prompt):

>Khalsa.example.microsoft.com

Default Server: MyServer.example.microsoft.com

Address: 10.0.0.2

Name: Khalsa.example.microsoft.com

Address: 192.168.111.1

Additional query words:

======================================================================
Keywords          :  
Technology        : kbWinNTsearch kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbAudDeveloper kbBackOfficeSearch kbSBServSearch kbBackOfficeServ400 kbSBServ400 kbSBServ400a kbSBServ450
Version           : :4.0,4.0a,4.5
Issue type        : kbprb

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2002.